RUUKKI OPTIM 700 MC

Alloy Digest ◽  
2014 ◽  
Vol 63 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Impact Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Minimum Yield

Abstract RUUKKI OPTIM 700 MC (700 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). Optim 700 MC Plus offers high strength, excellent flange ability, excellent shearability and pierceability, and excellent impact strength in all directions. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-178. Producer or source: Rautaruukki Corporation.

RUUKKI OPTIM 900 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

RUUKKI OPTIM 1100 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 1100 QC (1100 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-183. Producer or source: Rautaruukki Corporation.

DILLIMAX 690

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
Minimum Yield

Abstract Dillimax 550 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 690 MPa (100 ksi). Plate is delivered in three qualities: basic, tough, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-652. Producer or source: Dillinger Hütte GTS.

DILLIMAX 500

Alloy Digest ◽  
2012 ◽  
Vol 61 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
High Toughness ◽  
Minimum Yield

Abstract Dillimax 500 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 500 MPa (72 ksi). Plate is delivered in three qualities: basic, high toughness, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, heat treating, and joining. Filing Code: SA-645. Producer or source: Dillinger Hütte GTS.

RUUKKI OPTIM 600 MC

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Minimum Yield

Abstract RUUKKI OPTIM 600 MC (600 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-175. Producer or source: Rautaruukki Corporation.

DILLIMAX 965

Alloy Digest ◽  
2012 ◽  
Vol 61 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
Minimum Yield

Abstract Dillimax 965 is a high-strength, quenched and tempered, fine-grained structural steel with minimum yield strength of 965 MPa (140 ksi). Plate is delivered in three qualities; basic, tough, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-659. Producer or source: Dillinger Hütte GTS.

RUUKKI OPTIM 500 MC

Alloy Digest ◽  
2012 ◽  
Vol 61 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Minimum Yield

Abstract RUUKKI OPTIM 500 MC (500 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, heat treating, and joining. Filing Code: CS-168. Producer or source: Rautaruukki Corporation.

STRENX 1100 MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 1100 MC is a high-strength hot-rolled structural steel made for cold forming, with minimum yield strength of 1100 MPa (160 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S1100 MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-773. Producer or source: SSAB Swedish Steel Inc..

DILLIMAX 550

Alloy Digest ◽  
2012 ◽  
Vol 61 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Fine Grained ◽  
High Toughness ◽  
Minimum Yield

Abstract Dillimax 550 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 550 MPa (80 ksi). Plate is delivered in three qualities: basic, high toughness, and extra tough. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-649. Producer or source: Dillinger Hütte GTS.

RUUKKI OPTIM 550 MC

Alloy Digest ◽  
2012 ◽  
Vol 61 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Minimum Yield

Abstract RUUKKI OPTIM 550 MC (550 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-172. Producer or source: Rautaruukki Corporation.

Sign in / Sign up

Export Citation Format

Share Document