KME Cu-DHP

KME Cu-DHP is a phosphorus-deoxidized copper that contains a minimum of 99.90% copper and high residual phosphorus. The electrical conductivity of this type of copper is relatively low on account of the high phosphorus content. KME Cu-DHP possesses very good formability and joining properties and is resistant against hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-923. Producer or source: KME Germany GmbH.

SSAB RAMOR 500

SSAB Ramor 500 is a nickel-chromium-molybdenum-boron, alloy protection steel that is used in the quenched condition (hardness = 490–560 HBW) for ballistic protection. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, heat treating, and joining. Filing Code: SA-875. Producer or source: SSAB AB.

INDUSTEEL MARS 380

Industeel Mars 380 (earlier known as Industeel Mars 190) is a low-carbon, Ni-Cr-Mo-V-B, alloy protection steel that is used in the quenched and tempered condition (typical hardness = 380 HBW). It is used as rolled homogeneous armor for ballistic protection and evaluation of armor-defeating ammunition. This datasheet provides information on composition, hardness, and bend strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-869. Producer or source: Industeel France.

ATI CP Grade 7 Titanium

ATI CP Grade 7 Titanium is an unalloyed titanium grade that contains 0.12–0.25% Pd. This palladium-containing alloy extends the range of application of commercially pure (CP) titanium in HCl, H3PO4, and H2SO4 solutions. ATI CP Grade 7 Titanium is used in applications requiring excellent corrosion resistance in chemical processing or storage applications where the media is mildly reducing or fluctuates between oxidizing and reducing. It can be used in continuous service up to 425 °C (795 °F) and in intermittent service up to 540 °C (1000 °F). This datasheet provides information on composition, physical properties, elasticity, tensile properties and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-175. Producer or source: ATI.

INDUSTEEL MARS 600

Industeel Mars 600 is a medium-carbon, nickel-chromium-molybdenum-boron, alloy protection steel that is used in the quenched and tempered condition (typical hardness = 600 HBW). It is used not only as an add-on armor, but also as a structural material. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-876. Producer or source: Industeel France (a subsidiary of ArcelorMittal).

ATLAS 5052

Atlas 5052 is a wrought, non-heat-treatable, Al-2.5Mg-0.25Cr alloy (5xxx series) that offers an attractive combination of moderate strength, good formability and weldability, and excellent corrosion resistance particularly in marine atmospheres. It is also very easy to anodize, providing a pleasant matte finish. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-470. Producer or source: Atlas Steels.

KME Cu-ETP

KME Cu-ETP (electrolytic tough pitch copper) is an electrolytically refined, high conductivity copper that contains a minimum of 99.90% Cu and a controlled amount of oxygen in the form of Cu2O. It has a minimum electrical conductivity of 100% IACS. Cu-ETP is the most widely used grade of copper in electrical applications all over the world and represents over half of global copper use. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fatigue. It also includes information on heat treating. Filing Code: Cu-913. Producer or source: KME Germany GmbH.

ATLAS 5083

Atlas 5083 is a non-heat-treatable, Al-4.5Mg-0.7Mn-0.15Cr alloy that is known for exceptional performance in extreme environments. It is highly resistant to attack by both seawater and industrial chemicals. Atlas 5083 has the highest strength of the non-heat-treatable alloys but is not recommended for use at temperatures in excess of 65 °C (150 °F). It retains exceptional strength after welding. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-468. Producer or source: Atlas Steels.

AURUBIS Cu-OF

Aurubis Cu-OF is an oxygen-free, high conductivity copper with 99.95% minimum Cu. It offers the advantages of both electrolytic tough pitch (ETP) copper and phosphorus deoxidized (DHP) copper. Its high purity, with less than 10 ppm (0.001%) oxygen, and the absence of deoxidizers accounts for an electrical conductivity of 100% IACS minimum, as well as no susceptibility to hydrogen embrittlement. Due to the absence of oxides in the structure, Cu-OF is capable of withstanding extra deep drawing and severe forming, and is superior to Cu-ETP in this respect. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-911. Producer or Source: Aurubis AG.