COPPER ALLOY No. 903

Alloy Digest ◽  
1977 ◽  
Vol 26 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Gas Pressures

Abstract Copper Alloy No. 903 is a cast copper-tin-zinc alloy known also as G Bronze or 88-8-0-4 alloy. It has a good combination of strength and corrosion resistance and is often used in castings subject to liquid or gas pressures. Among its many uses are valves, pumps, bushings and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-345. Producer or source: Copper alloy foundries.

BUNTING ALLOY 905

Alloy Digest ◽  
1978 ◽  
Vol 27 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Bearing Alloy ◽  
Gas Pressures

Abstract BUNTING Alloy 905 is a cast bronze bearing alloy. It is a copper-tin-zinc alloy known also as Gunmetal and 88-10-0-2 alloy. It has a good combination of corrosion resistance and strength. It is recommended for castings that are to be used under liquid or gas pressures. Its many uses include bearings, fittings and valves. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-358. Producer or source: NL Industries Inc., Bearing Division.

COPPER ALLOY No. C92600

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Lead Zinc

Abstract Copper Alloy No. C96600 is a cast copper-tin-lead-zinc alloy also known as 87-10-1-2 alloy. It is characterized by a good combination of strength, machinability and resistance to corrosion. This alloy is often used to make castings for valves and pumps which are subject to liquid and gas pressure and, therefore, must be free from internal porosity, shrinkage or other defects. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-410. Producer or source: Copper alloy foundries.

MUNTZ METAL

Alloy Digest ◽  
1955 ◽  
Vol 4 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Strength ◽  
Copper Zinc

Abstract MUNTZ METAL is a 60-40 copper-zinc alloy having good strength but low ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-25. Producer or source: Copper alloy mills.

COPPER ALLOY No. 675

Alloy Digest ◽  
1971 ◽  
Vol 20 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Copper Zinc

Abstract COPPER ALLOY No. 675 is a copper-zinc alloy having excellent mechanical properties and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-244. Producer or source: Brass mills.

COPPER ALLOY No. 844

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Resistance ◽  
Lead Zinc ◽  
Strength And Ductility

Abstract Copper Alloy No. 844 is a free-cutting copper-tin-lead-zinc alloy for castings; it was formerly identified as 81-3-7-9 alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. It is used widely for fittings, plumbing goods and valves. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-349. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 770

Alloy Digest ◽  
1968 ◽  
Vol 17 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Resistance Wire ◽  
Nickel Zinc ◽  
Copper Nickel

Abstract COPPER Alloy No. 770 is a spring quality copper-nickel zinc alloy having high resistance to corrosion. It is recommended primarily for optical goods, springs, resistance wire, hardware and similar products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-185. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. C84200

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Lead Zinc ◽  
Pipe Fittings ◽  
Strength And Ductility

Abstract Copper Alloy No.1 C84200 is a free-machining copper-tin-lead-zinc alloy for castings; it was formerly identified as 80-5-2.5-12.5 alloy. It has good casting characteristics, good machinability, moderate strength and ductility and good corrosion resistance. Among its many uses are ornamental fixtures, general hardware, plumbing goods, small gears and pipe fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-450. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-446, October 1982.

COPPER ALLOY No. 745

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Nickel Zinc ◽  
Copper Nickel ◽  
Good Workability

Abstract COPPER ALLOY No. 745 is a copper-nickel-zinc alloy which has very good workability, weldability, and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-251. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. 485

Alloy Digest ◽  
1972 ◽  
Vol 21 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Copper Zinc ◽  
Mechanical Properties And Corrosion

Abstract COPPER ALLOY No. 485 is a free-cutting copper-zinc alloy having good mechanical properties and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-249. Producer or source: Brass mills.

COPPER ALLOY No. C92700

Alloy Digest ◽  
1984 ◽  
Vol 33 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Base Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Gas Pressure ◽  
Copper Base ◽  
Copper Base Alloy

Abstract Copper Alloy No. C92700 is a cast copper-base alloy; it formerly was known as 88-10-2-0 alloy. It is characterized by a good combination of machinability, strength and resistance to corrosion. Among its many uses are bearings, pump impellers, piston rings and valve parts that are subject to liquid and or gas pressure and, therefore, must be sound (free from defects). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-477. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document