BUNTING ALLOY 905

Alloy Digest ◽  
1978 ◽  
Vol 27 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Bearing Alloy ◽  
Gas Pressures

Abstract BUNTING Alloy 905 is a cast bronze bearing alloy. It is a copper-tin-zinc alloy known also as Gunmetal and 88-10-0-2 alloy. It has a good combination of corrosion resistance and strength. It is recommended for castings that are to be used under liquid or gas pressures. Its many uses include bearings, fittings and valves. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-358. Producer or source: NL Industries Inc., Bearing Division.

BUNTING ALLOY 923

Alloy Digest ◽  
1979 ◽  
Vol 28 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Lead Zinc

Abstract BUNTING Alloy 923 is a cast copper-tin-lead-zinc alloy that possesses a good combination of machinability, strength and resistance to corrosion. It is known also as 87-8-1-4 alloy or Leaded G Bronze. It withstands gas or liquid pressures quite successfully. Its numerous applications include valves, gears and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-367. Producer or source: NL Industries Inc., Bearing Division.

COPPER ALLOY No. C92600

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Lead Zinc

Abstract Copper Alloy No. C96600 is a cast copper-tin-lead-zinc alloy also known as 87-10-1-2 alloy. It is characterized by a good combination of strength, machinability and resistance to corrosion. This alloy is often used to make castings for valves and pumps which are subject to liquid and gas pressure and, therefore, must be free from internal porosity, shrinkage or other defects. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-410. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 903

Alloy Digest ◽  
1977 ◽  
Vol 26 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Gas Pressures

Abstract Copper Alloy No. 903 is a cast copper-tin-zinc alloy known also as G Bronze or 88-8-0-4 alloy. It has a good combination of strength and corrosion resistance and is often used in castings subject to liquid or gas pressures. Among its many uses are valves, pumps, bushings and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-345. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

BUNTING ALLOY 907

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Tin Bronze ◽  
Standard Alloy

Abstract BUNTING Alloy 907 is a cast copper-tin alloy (tin bronze) recommended for severe service requirements. It is used widely for bearings and gears. It is a standard alloy for the manufacture of cast gear blanks and has long been known as Phosphor Gear Bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-328. Producer or source: NL Industries Inc., Bearing Division.

LUMEN ALLOY 9

Alloy Digest ◽  
1957 ◽  
Vol 6 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sea Water ◽  
Heat Treating

Abstract UMEN ALLOY 9 is a manganese bronze having excellent combination of strength and corrosion resistance in fresh and sea water. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-57. Producer or source: Lumen Bearing Company.

BUNTING ALLOY 156

Alloy Digest ◽  
1965 ◽  
Vol 14 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating

Abstract Bunting No. 156 is a hard phosphor gear and bearing bronze recommended where the service requirements are severe. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-158. Producer or source: Bunting Brass & Bronze Company.

ELEKTRON AZM

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Level ◽  
Extrusion Alloy

Abstract ELEKTRON AZM is a magnesium extrusion alloy having a high strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-45. Producer or source: Magnesium Elektron Ltd.

COPPER ALLOY No. C93400

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Tin Bronze

Abstract Copper Alloy No. C93400 is cast bronze containing nominally 8% tin and 8% lead. Former commercial names (not recommended) are (1) High-Leaded Tin Bronze and (2) 84-8-8-0. It has excellent machinability, low strength and good resistance to corrosion. Its applications include bearings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-401. Producer or source: Copper alloy foundries.

LUMEN ALLOY 11-C

Alloy Digest ◽  
1955 ◽  
Vol 4 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Heat Treatments ◽  
Aluminum Bronze

Abstract LUMEN ALLOY 11-C is a high strength aluminum bronze having good wear and fatigue resistance. It responds to varying heat treatments. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-32. Producer or source: Lumen Bearing Company.

Sign in / Sign up

Export Citation Format

Share Document