Removal of Copper, Nickel, and Zinc Ions from an Aqueous Solution through Electrochemical and Nanofiltration Membrane Processes

Heavy metal contamination in water is a major health concern, directly related to rapid growth in industrialization, urbanization, and modernization in agriculture. Keeping this in view, the present study has attempted to develop models for the process optimization of nanofiltration (NF) membrane and electrocoagulation (EC) processes for the removal of copper, nickel, and zinc from an aqueous solution, employing the response surface methodology (RSM). The variable factors were feed concentration, temperature, pH, and pressure for the NF membrane process; and time, solution pH, feed concentration, and current for the EC process, respectively. The central composite design (CCD), the most commonly used fractional factorial design, was employed to plan the experiments. RSM models were statistically analyzed using analysis of variance (ANOVA). For the NF membrane, the rejection of Zn, Ni, and Cu was observed as 98.64%, 90.54%, and 99.79% respectively; while the removal of these through the EC process was observed as 99.81%, 99.99%, and 99.98%, respectively. The above findings and a comparison with the conventional precipitation and adsorption processes apparently indicate an advantage in employing the NF and EC processes. Further, between the two, the EC process emerged as more efficient than the NF process for the removal of the studied metals.

Effect of Temperature on Biobeneficiation of Bulk Copper-Nickel Concentrate with Thermoacidophilic Microbial Communities

Bioleaching of the bulk copper–nickel sulfide concentrate was proposed as a method to remove nickel from it and to obtain a concentrate containing copper as chalcopyrite. This approach is based on the different refractoriness of sulfide minerals in ferric sulfate solutions and oxidation by acidophilic microorganisms. The bulk concentrate contained 10.8% copper in the form of chalcopyrite (CuFeS2) and 7.2% nickel that occurred in pentlandite ((Ni,Fe)9S8) and violarite (FeNi2S4). Three microbial communities grown at 35, 40, and 50 °C were used for bioleaching. The microbial community at 40 °C was the most diverse in the genus and species composition. At all temperatures of the process, the key roles in bioleaching belonged to mixotrophic and heterotrophic acidophiles. The highest levels of nickel leaching of 97.2 and 96.3% were observed in the case of communities growing at 40 and 50 °C, respectively. At the same time, the bioleach residue, which could be characterized as a marketable high-grade copper (chalcopyrite) concentrate, was obtained only at 40 °C. This solid contained 15.6% copper and 0.54% nickel. Thus, the biobeneficiation of bulk sulfide concentrates can be a promising field of biohydrometallurgy.

Study of Copper–Nickel Nanoparticle Resistive Ink Compatible with Printed Copper Films for Power Electronics Applications

This paper is focused on copper–nickel nanoparticle resistive inks compatible with thick printed copper (TPC) technology, which can be used for power substrate manufacturing instead of conventional metallization techniques. Two types of copper–nickel inks were prepared and deposited by Aerosol Jet technology. The first type of ink was based on copper and nickel nanoparticles with a ratio of 75:25, and the second type of ink consisted of copper–nickel alloy nanoparticles with a ratio of 55:45. The characterization of electrical parameters, microstructure, thermal analysis of prepared inks and study of the influence of copper–nickel content on electrical parameters are described in this paper. It was verified that ink with a copper–nickel ratio of 55:45 (based on constantan nanoparticles) is more appropriate for the production of resistors due to low sheet resistance ~1 Ω/square and low temperature coefficient of resistance ±100·10−6 K−1 values. Copper–nickel inks can be fired in a protective nitrogen atmosphere, which ensures compatibility with copper films. The compatibility of copper–nickel and copper films enables the production of integrated resistors directly on ceramics substrates of power electronics modules made by TPC technology.

Investigation into Mechanical Properties and Sliding Wear Behavior of Friction Stir Processed Surface Composite Material

One of the different and pioneering solid-state techniques, friction stir processing (FSP), is employed for the production of surface composites. In this research, the matrix selected was copper-nickel (CuNi) with hard boron carbide particle as reinforcement. The objective of the current research work is to produce reinforced 90/10 copper-nickel surface composites reinforced with B4C fabricated via FSP. The influence of tool rotational speed on macrostructure, microstructure, grain size analysis, microhardness, and wear studies of friction stir processed (FSPed) CuNi/B4C surface composites was assessed. For high rotational speed (1400 rpm) of stir tool, the modified surface area found is a maximum of 44.4 mm2 with uniform dispersion of hard particle reinforcement. The presence of hard particle in the surface area is revealed through the electron imaging and the spectroscopic results. Spectra mapping shows the uniform distribution of hard particle over the FSPed area, and the evidence is obtained with XRD analysis. From the experimentation, it is interesting to report that the reinforcements have decreased the surface hardness for an increased rotational speed of stir tool. The hardness recorded for minimum rotational speed is 223 HV which has gradually decreased to 178 HV for 1300 rpm. It has directly influenced the wear rate of modified FSPed, as hardness is directly proportional to wear behavior. The worn surface and fractured morphology of the CuNi/B4C surface composites were also studied using Field Emission Scanning Electron Microscope (FESEM).

Conductive materials for connecting tires of multi-element accumulator traction batteries

The article deals with the choice of materials for connecting tires of traction batteries (TB). The optimal parameters of their spot welding with batteries are experimentally established (the first pulse with a current of 7 kA duration of 1 ms, the break between the pulses of 1 ms, the second pulse with a current of 7 kA duration of 2 ms). When operating the traction battery on electric vehicles, the resistance of the connecting tires should not lead to heating of the batteries in order to avoid overheating above 60 °C. In most modern TB, consisting of Li-ion elements, a nickel tape is used for the connection. To ensure the weldability of materials (copper–nickel or nickel–nickel), it is important that the operating temperature is reached at a short-term current pulse in the welding zone. One of the solutions to this problem is the application of a metal coating. Experiments were conducted on the weldability of various materials, including those with applied coatings. The best results in weldability were shown by tires made of tinned copper, which was welded to nickel plates (emitting the battery body). Tear tests of the welded samples were carried out. The tensile strength of the original copper tires was 340–450 MPa. When welding copper–nickel and copper(tinned) – nickel plates, the strength limit values reach 70 % of the strength of the original copper plate. On the basis of the obtained experimental data, a pilot batch of battery TB was manufactured, which successfully passed tests for compliance with the technical requirements for the strength and the value of the transition resistances of the welded joints of connecting buses with batteries.