KANTHAL 200R10

Alloy Digest ◽  
2008 ◽  
Vol 57 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Range

Abstract Kanthal 200R10 is a thermostatic bimetal and is recommended for use in the temperature range −20 to 250 deg C (−4 to 480 deg F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: MN-4. Producer or source: Kanthal AB.

KANTHAL 135 R05

Alloy Digest ◽  
2010 ◽  
Vol 59 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Range

Abstract Kanthal 135 R05 is a thermostatic bimetal and is recommended for use in the temperature range -20 to 250 deg C (-4 to 482 deg F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: FE-152. Producer or source: Kanthal AB.

INDALLOY 160-190

Alloy Digest ◽  
1984 ◽  
Vol 33 (1) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Precision Measurement ◽  
Heat Treating ◽  
Spray Forming ◽  
Growth Behavior ◽  
Temperature Range

Abstract INDALLOY 160-190 is a bismth-base low-melting alloy that melts through th temperature range 160-190 F. It shrinks immediately upon solidification, grows back to zero in about one hour and then shows additional growth. This shrinkage-growth behavior makes it an ideal alloy for proof casting and precision measurement of internal dimensions. This alloy originally was developed for use by children for casting soldiers and other small objects. It performs best among the low-melting alloys for spraying in the spray forming of masks and molds and in metallizing. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Bi-34. Producer or source: Indium Corporation of America.

KANTHAL 200/72

Alloy Digest ◽  
2008 ◽  
Vol 57 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Range

Abstract Kanthal 200/72, a thermostatic bimetal, is recommended for use in the temperature range −20 to 250 deg C (−4 to 480 deg F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: MN-3. Producer or source: Kanthal AB.

NICKELVAC L-605

Alloy Digest ◽  
1967 ◽  
Vol 16 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract NICKELVAC L-605 is a double vacuum melted, cobalt-base alloy for high temperature applications. It is recommended for highly stressed parts operating in the temperature range of 1700 to 2000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-53. Producer or source: Allvac Metals Company, A Teledyne Company.

KANTHAL 155

Alloy Digest ◽  
2008 ◽  
Vol 57 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Range

Abstract Kanthal 155 is a thermostatic bimetal and is recommended for use in the temperature range −20 to 350 deg C, −4 to 660 deg F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: FE-147. Producer or source: Kanthal AB.

BISMUTH-28.5Pb-14.5Sn-9Sb

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Sheet Steel ◽  
Heat Treating ◽  
Temperature Range ◽  
Silicon Sheet

Abstract Bismuth-28.5Pb-14.5Sn-9Sb is a bismuth-base non-eutectic alloy that melts over the low-temperature range of 218-440 F. Its controlled-shrinkage characteristics and low melting temperature make it a valuable industrial tool. It was developed and used originally for making punching dies to produce transformer laminations from silicon sheet steel. Now its many uses include filling blow holes in castings, anchoring dies and non-machinery parts, fixtures, jigs and hold-down bolts in concrete floors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-30. Producer or source: Producers of low-melting alloys.

RA 321

Alloy Digest ◽  
2003 ◽  
Vol 52 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Range ◽  
Temperature Performance

Abstract RA 321 is a titanium-stabilized austenitic stainless steel commonly used for service in the 540 to 870 deg C (1000 to 1600 deg F) temperature range. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as machining. Filing Code: SS-890. Producer or source: Rolled Alloys Inc.

INDALLOY 281-338

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Investment Casting ◽  
Base Alloy ◽  
Heat Treating ◽  
Jet Engine ◽  
Temperature Range ◽  
Scientists And Engineers

Abstract INDALLOY 281-338 is a tin-base alloy that can be melted easily. It is non-eutectic alloy and melts through a temperature range of 281-338 F. It provides scientists and engineers with an easily castable material that is ready for use soon after it freezes; in addition, it can be recovered readily and recycled into new uses any number of times. Among its many uses are fusible mandrels for electroforming, proof casting in foundries, low-temperature solder, holding jet engine blades for machining and dies for wax patterns for investment casting. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Sn-10. Producer or source: Indium Corporation of America.

DOCOL 1200 MZE

Alloy Digest ◽  
2013 ◽  
Vol 62 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Chemical Composition ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Water Quenching ◽  
Continuous Annealing ◽  
Martensitic Steels ◽  
Temperature Range

Abstract Docol M are cold reduced fully martensitic steels. These steels are manufactured using special heat treatment in a continuous annealing line. The ultra high strength is produced by extremely fast water quenching from an elevated austenitic temperature range. Docol M grades are characterized by good formability at these high-strength levels combined with good weldability. All conventional welding methods can be used due to the lean chemical composition. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming. Filing Code: SA-687. Producer or source: SSAB Swedish Steel Inc..

BELMONT ALLOY 2481

Alloy Digest ◽  
1979 ◽  
Vol 28 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Steel Sheet ◽  
Heat Treating ◽  
Silicon Steel ◽  
Temperature Range ◽  
Manufacturing Operations ◽  
Machine Shops

Abstract BELMONT ALLOY 2481 is a bismuth-base, non-eutectic alloy that melts through the temperature range 218-440 F. It was developed and used originally for making punch dies to produce transformer laminations from silicon steel sheet. It is now also used to make a wide variety of punch dies and plates, chuck jaws and other holding devices for machine shops and manufacturing operations. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-14. Producer or source: Belmont Metals Inc..

Sign in / Sign up

Export Citation Format

Share Document