DURCO D-10

Alloy Digest ◽  
1962 ◽  
Vol 11 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Magnetic Alloy

Abstract Durco D-10 is a nonferrous, non-magnetic alloy containing nickel and chromium totaling about 80%. It is recommended for corrosion resisting castings where a higher corrosion resistance is required than that of stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-76. Producer or source: The Duriron Company Inc..

SANDVIK 12R72HV

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Petrochemical Industry ◽  
Heat Treating ◽  
Metal Temperature ◽  
Temperature Performance

Abstract SANDVIK 12R72HV is an austenitic chromium-nickel-molybdenum-titanium stainless steel suitable for metal temperature up to about 308 in the power industry and the petrochemical industry. Typical applications are superheater tubes and hydrocarbon crackers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: SS-248. Producer or source: Sandvik.

ARMCO 18-9LW

Alloy Digest ◽  
1962 ◽  
Vol 11 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Work Hardening ◽  
Heat Treating ◽  
Cold Forming

Abstract Armco 18-9LW is a low-work-hardening stainless steel developed for severe cold heading, swaging and other cold forming applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-138. Producer or source: Armco Inc., Eastern Steel Division.

URANUS B64

Alloy Digest ◽  
2015 ◽  
Vol 64 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract Uranus B64 is a pitting resistant, high-strength nonmagnetic stainless steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-1218. Producer or source: Industeel USA, LLC. See also Alloy Digest SS-1253, October 2016.

UGI 209

Alloy Digest ◽  
2014 ◽  
Vol 63 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Heat Treating ◽  
High Corrosion Resistance ◽  
High Corrosion

Abstract UGI 209 is an austenitic stainless steel with high corrosion resistance and a low magnetic permeability. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-1192. Producer or source: Schmolz + Bickenbach USA Inc..

DONEGAL DC-50

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Weight Ratio ◽  
High Strength ◽  
Heat Treating

Abstract Donegal DC-50 is a precipitation hardening stainless steel having high strength-weight ratio. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SS-17. Producer or source: Donegal Manufacturing Corporation.

ALLEGHENY METAL 355

Alloy Digest ◽  
1960 ◽  
Vol 9 (12) ◽  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract Allegheny Metal 355 is a chromium-nickel-molybdenum stainless steel to bridge the gap between the 300 and 400 series. It can be precipitation hardened by heat treatment. It is best suited for heavy sections. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-112. Producer or source: Allegheny Ludlum Corporation.

CROLOY 16-6PH

Alloy Digest ◽  
1970 ◽  
Vol 19 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Erosion Resistance ◽  
High Strength ◽  
Heat Treating

Abstract CROLOY 16-6PH is a martensitic-ferritic precipitation-hardening stainless steel recommended for applications requiring corrosion and erosion resistance combined with high strength and hardness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-237. Producer or source: Babcock & Wilcox Company.

ARMCO 14 SF

Alloy Digest ◽  
1964 ◽  
Vol 13 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Heat Treating ◽  
Machining Characteristics

Abstract Armco 14SF is a modification of Type 416 stainless steel designed to give the ultimate in free-machining characteristics and in surface finish. It is basically non-hardenable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-153. Producer or source: Armco Inc., Eastern Steel Division.

BORON STAINLESS STEEL

Alloy Digest ◽  
1962 ◽  
Vol 11 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Atomic Energy ◽  
Control Applications ◽  
Energy Field ◽  
And Control

Abstract Boron Stainless Steel is a wrought austenitic alloy serving the atomic energy field in vital reactor shielding and control applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-135. Producer or source: Superior Steel Corporation.

JETHETE M.152

Alloy Digest ◽  
1962 ◽  
Vol 11 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Type Stainless Steel

Abstract A.C.I. Type CF-8 is an 18-8 type stainless steel recommendation for the chemical and allied industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-133. Producer or source: Luria Steel & Trading Corporation (Agent).

Sign in / Sign up

Export Citation Format

Share Document