MICROCAST-X IN-718

Alloy Digest ◽  
1995 ◽  
Vol 44 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Properties ◽  
Negative Impact ◽  
Heat Treating ◽  
Rupture Properties

Abstract The Microcast-X process produces a finer grain size than earlier produced castings which improves mechanical properties in IN-718 without negative impact on rupture properties in temperatures of interest for applications in the aerospace market. This datasheet provides information on composition, microstructureelasticity, and tensile properties as well as fatigue. It also includes information on casting and heat treating. Filing Code: Ni-482. Producer or source: Howmet Corporation.

MICROCAST-X MAR-M-247

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Properties ◽  
Negative Impact ◽  
Rupture Properties

Abstract The Microcast-X process produces a substantially finer grain size that improves mechanical properties in MAR-M-247 with modest negative impact on rupture properties above 1600 F (871 C). This datasheet provides information on composition, microstructureand tensile properties as well as creep and fatigue. It also includes information on casting. Filing Code: Ni-481. Producer or source: Howmet Corporation.

VDM 601

Alloy Digest ◽  
2021 ◽  
Vol 70 (4) ◽  
Keyword(s):  
Grain Size ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Coarse Grain ◽  
Nickel Chromium ◽  
Rupture Properties

Abstract VDM 601 (Nicrofer 6023 H) is a nickel-chromium-iron alloy with additions of aluminum and titanium. This alloy is specifically recommended for service above 550 °C (1020 °F) because of its superior creep-rupture properties resulting from its controlled carbon content and coarse grain size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-769. Producer or source: VDM Metals GmbH.

CONDULOY

Alloy Digest ◽  
1953 ◽  
Vol 2 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Hardening Heat Treatment

Abstract CONDULOY is a low beryllium-copper alloy containing about 1.5% nickel. It responds to age-hardening heat treatment for improved mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-11. Producer or source: Brush Beryllium Company.

HAYNES ALLOY No. 625SQ

Alloy Digest ◽  
2003 ◽  
Vol 52 (8) ◽  
Keyword(s):  
Grain Size ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Heat Treating ◽  
Temperature Performance ◽  
Haynes Alloy

Abstract Haynes 625SQ alloy is a modification of Haynes 625 alloy (see Alloy Digest Ni-354, January 1988) with tighter controls on chemistry and a finer grain size for fatigue resistance up to 680 deg C (1250 deg F). This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: Ni-612. Producer or source: Haynes International Inc.

PD-135

Alloy Digest ◽  
1972 ◽  
Vol 21 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Thermal Conductivities

Abstract PD-135 is an oxygen-free, age-hardenable copper containing chromium and cadmium. It has excellent mechanical properties and high electrical and thermal conductivities. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-261. Producer or source: Phelps Dodge Copper Products Company.

COPPER ALLOY No. 675

Alloy Digest ◽  
1971 ◽  
Vol 20 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Copper Zinc

Abstract COPPER ALLOY No. 675 is a copper-zinc alloy having excellent mechanical properties and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-244. Producer or source: Brass mills.

ALUMINUM 319.0

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rear Axle ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract ALUMINUM 319.0 is a general-purpose foundry alloy that is moderately responsive to heat treatment. It has excellent casting characteristics and good mechanical properties. Among its many uses are crankcases, housings, engine parts, typewriter frames and rear-axle housings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on low and high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-256. Producer or source: Various aluminum companies.

ANACONDA ALLOY (C) 521

Alloy Digest ◽  
1979 ◽  
Vol 28 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Heavy Duty ◽  
Bronze Alloy ◽  
Good Corrosion Resistance ◽  
Bridge Bearing

Abstract ANACONDA Alloy (C) 521 is the phosphor bronze used where the highest demand is made for resilience, strength and resistance to fatigue. It has generally higher mechanical properties than Anaconda Alloy (A) 510 which is the most widely used phosphor bronze. Alloy (C) 521 has excellent to good corrosion resistance in most environments. Typical applications include heavy-duty springs, bridge bearing plates and heavy-duty cold-headed parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-381. Producer or source: Anaconda American Brass Company.

AMPCOLOY 525

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Chemical Processing ◽  
Copper Nickel Alloy ◽  
Superior Corrosion Resistance

Abstract AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

ANSONIA C14500

Alloy Digest ◽  
2008 ◽  
Vol 57 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pure Copper ◽  
Physical And Mechanical Properties ◽  
Heat Treating

Abstract Ansonia alloy C14500 has unique fabrication properties while maintaining both physical and mechanical properties close to pure copper. The addition of Tellurium makes the alloy free machining. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-752. Producer or source: Ansonia Copper & Brass Inc.

Sign in / Sign up

Export Citation Format

Share Document