NM-100 STEEL

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance

Abstract NM-100 STEEL is a wrought, highly alloyed martensitic steel having excellent wear and corrosion resistance at temperatures up to 1100 F. It is recommended for high temperature bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-231. Producer or source: Whittaker Corporation, Nuclear Metals Division.

MAGNESIUM EK30A

Alloy Digest ◽  
1957 ◽  
Vol 6 (11) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Rare Earth ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Creep Properties ◽  
Temperature Performance

Abstract MAGNESIUM EK30A is a rare-earth type magnesium sand casting alloy recommended for applications requiring good creep properties at 300 to 500 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Mg-35. Producer or source: Magnesium foundries.

MICROMACH

Alloy Digest ◽  
1959 ◽  
Vol 8 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Hard Condition ◽  
Temperature Performance

Abstract MicroMack is a nitrogen-containing austenitic stainless steel similar to Type 301 stainless but having higher ductility in the full hard condition. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-96. Producer or source: Washington Steel Corporation.

ELEKTRON WE43

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
North America ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract Elektron WE43 was developed by Magnesium Elektron for use to 300 deg C and has good mechanical properties at these temperatures. The alloy is used in military and motorsport applications where these properties are at a premium. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: MG-76. Producer or source: Magnesium Elektron Wrought Products, North America.

LEADED NICKEL BRONZE 65-20

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Nickel Zinc ◽  
Temperature Performance

Abstract LEADED NICKEL BRONZE 65-20 is a cast copper-nickel zinc-tin alloy to which lead has been added to improve machinability. It is sometimes known as DAIRY BRONZE and has many marine, industrial and ornamental uses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Cu-275. Producer or source: Copper alloy foundries.

ELEKTRON TZ6

Alloy Digest ◽  
1954 ◽  
Vol 3 (7) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Hot Tearing ◽  
Temperature Performance

Abstract Elektron TZ6 is a further variant of Elektron Z5Z having slightly higher tensile properties and also suitable for making castings which are subject to hot tearing. This alloy also has a very low tendency to microporosity and is weldable by the argonarc process. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-10. Producer or source: Magnesium Elektron Ltd.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

FEDERALOY F-1

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Performance

Abstract Federaloy F-1 is a copper tin-zinc bearing bronze whose strength suits it for applications where loads are heavy. It should be used only where lubrication is exceptionally good or motion is of a rocking nature. It is also a good gear bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and deformation. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: Cu-19. Producer or source: Federal-Mogul Corporation.

SILNIC BRONZE

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Nickel Silicon

Abstract SILNIC BRONZE is a copper-nickel-silicon alloy having high strength, high conductivity and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-90. Producer or source: Chase Brass & Copper Company Inc..

Sign in / Sign up

Export Citation Format

Share Document