HPS 100W

Alloy Digest ◽  
2006 ◽  
Vol 55 (2) ◽  
Keyword(s):  
Structural Steel ◽  
High Strength ◽  
Steel Plates ◽  
Standard Specification ◽  
Truss Bridges ◽  
Girder Bridges ◽  
Long Span ◽  
Depth Control ◽  
Steel Shapes ◽  
Steel Truss Bridges

Abstract HPS 100W is specified in ASTM A 709 (Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges) and is being added to AASHTO M270. Initial applications were planned to be those in which an owner bridge engineer would approve the use of HPS 100W. This steel would be most useful for depth control over piers in long-span girder bridges or controlling the size of high-stressed elements in long-span steel truss bridges. This datasheet provides information on composition and tensile properties. It also includes information on forming and joining. Filing Code: SA-555. Producer or source: International Steel Group Inc.

Study on the Cooling Process of Low Yield Ratio 590-780MPa Grade Steel Plates for High-Rise Buildings

2011 ◽  
Vol 194-196 ◽  
pp. 292-295 ◽  
Author(s):  
Jian Kang ◽  
Zhao Dong Wang ◽  
Guo Dong Wang
Keyword(s):  
Mechanical Properties ◽  
Structural Steel ◽  
High Strength ◽  
Ferrite Matrix ◽  
Yield Ratio ◽  
Steel Plates ◽  
Air Cooling ◽  
Soft Phase ◽  
Cooling Temperature ◽  
Ultra Fast Cooling

To develop 590/780MPa grade low yield ratio structural steel, the effects of ultra fast cooling (UFC) new process on microstructure and mechanical properties were investigated. The results showed that the low yield ratio and high strength can be obtained by proper phase compositions including relative soft phase and hard phase. For the process of UFC + air cooling, when UFC final cooling temperature was 521°C, 22.5% M-A second hard phases were distributed on bainite ferrite matrix in steel No.A2. The mechanical properties can meet requirement of 590MPa grade low yield ratio structural steel. For the process of air cooling + UFC, when UFC initial cooling temperature was 781°C, the multiphase composed of 28.3% ferrite and other bainite / martensite lath structure can ensure the high strength and low yield ratio of steel No.B1. And performance indexes can meet the requirement of 780MPa grade low yield ratio structural steel.

Development of High-Strength Steel Plates for Low-Temperature Use

1988 ◽  
Vol 110 (3) ◽  
pp. 171-176
Author(s):  
Y. Nakano ◽  
Y. Saito ◽  
K. Amano ◽  
M. Koda ◽  
Y. Sannomiya ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Yield Strength ◽  
Structural Steel ◽  
Welded Joints ◽  
High Strength Steel ◽  
Control Process ◽  
Charpy Impact ◽  
High Strength ◽  
Steel Plates

This paper describes the metallurgical approaches for producing 415MPa and 460MPa yield strength offshore structural steel plates and the mechanical properties of the steel plates and their welded joints. A thermo-mechanical control process (TMCP) was adopted to manufacture YP415MPa and YP460MPa steel plates with weldability comparable to conventional YP355MPa steel plates. The Charpy impact and CTOD tests of the steel plates and their welded joints proved to be very good.

Sign in / Sign up

Export Citation Format

Share Document