RQT 501

Alloy Digest ◽  
2012 ◽  
Vol 61 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength

Abstract RQT 501 is a quenched and tempered structural steel available in thicknesses 8 to 100 mm (0.3 to 4.0 in.) that combines high strength with excellent forming and welding performance. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-662. Producer or source: Europe, Corus Long Products.

RQT 901

Alloy Digest ◽  
2013 ◽  
Vol 62 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength

Abstract RQT 901 is a quenched and tempered structural steel available in thicknesses 8 to 65 mm (0.3 to 2.5 in.) that combines high strength with excellent forming and welding performance. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-672. Producer or source: Corus Long Products, Europe.

STRENX 1100 MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 1100 MC is a high-strength hot-rolled structural steel made for cold forming, with minimum yield strength of 1100 MPa (160 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S1100 MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-773. Producer or source: SSAB Swedish Steel Inc..

STRENX 650MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 650MC is a high-strength hot-rolled structural steel made for cold forming, with minimum yield strength of 650 MPa (94 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S650MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming. Filing Code: SA-759. Producer or source: SSAB Swedish Steel Inc..

RQT 601

Alloy Digest ◽  
2014 ◽  
Vol 63 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength

Abstract RQT 601 is a quenched and tempered structural steel available in thicknesses 8 to 80 mm (0.3 to 3.0 in.) that combines high strength with excellent forming and welding performance. Originally published as Alloy Digest SA-665, December 2012, revised April 2014. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-698. Producer or source: Corus Long Products, Tata Steel.

MAGNESIUM ZK60A

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Temperature Performance

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.

RMI 6Al-2Sn-2Zr-2Mo-0.15Si

Alloy Digest ◽  
2001 ◽  
Vol 50 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
High Modulus ◽  
Temperature Performance ◽  
Heavy Section

Abstract Ti-6Al-2Sn-2Zr-2Mo-0.05Si alloy is used as heavy section forgings that require high strength, fracture toughness, and high modulus. It is used as forgings and sheet for air frames. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness and creep. It also includes information on high temperature performance as well as joining. Filing Code: TI-119. Producer or source: RMI Company.

STRENX 700

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Load Bearing ◽  
Minimum Yield

Abstract Strenx 700 is a high-strength structural steel with a minimum yield strength of 650–700 MPa (94–102 ksi) depending on thickness. Strenx 700 meets the requirements of EN 10 025-6 for the S690 grade and thicknesses. Typical applications include demanding load-bearing structures. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-779. Producer or source: SSAB Swedish Steel Inc..

DILLIMAX 690

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
Minimum Yield

Abstract Dillimax 550 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 690 MPa (100 ksi). Plate is delivered in three qualities: basic, tough, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-652. Producer or source: Dillinger Hütte GTS.

DILLIMAX 500

Alloy Digest ◽  
2012 ◽  
Vol 61 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
High Toughness ◽  
Minimum Yield

Abstract Dillimax 500 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 500 MPa (72 ksi). Plate is delivered in three qualities: basic, high toughness, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, heat treating, and joining. Filing Code: SA-645. Producer or source: Dillinger Hütte GTS.

DOMEX 110XF

Alloy Digest ◽  
2003 ◽  
Vol 52 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
Civil Engineering ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Structural Components ◽  
Very High

Abstract Domex 110XF is a very-high-strength steel that is used for automotive and civil engineering structural components. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: SA-512. Producer or source: SSAB Swedish Steel Inc.

Sign in / Sign up

Export Citation Format

Share Document