CARPENTER STAINLESS 22Cr-13Ni-5Mn

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Aisi Type ◽  
Cold Worked

Abstract CARPENTER STAINLESS 22Cr-13Ni-5Mn has very good corrosion resistance in combination with high strength. It has better corrosion resistance than AISI Type 316 stainless steel and approximately twice the yield strength. Carpenter 22Cr-13Ni-5Mn can be machined, cold worked and welded using the same equipment and methods used for the conventional AISI 300 series of stainless steels. It is nonmagnetic as annealed and after severe cold work. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-353. Producer or source: Carpenter.

CRUCIBLE XM 19 STAINLESS

Alloy Digest ◽  
1982 ◽  
Vol 31 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Stainless Steels ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Aisi Type ◽  
Cold Worked

Abstract CRUCIBLE XM 19 Stainless is a nitrogen-strengthened, low-carbon austenitic stainless steel that provides good corrosion resistance in combination with high strength. The alloy has better corrosion resistance than AISI Type 316 with approximately twice the yield strength. It can be welded, machined and cold worked using the same equipment and methods used for the conventional AISI 300 series stainless steels. It is nonmagnetic as annealed and after severe cold work. Its many uses include cables, fasteners, pumps, valves, marine hardware and springs. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-414. Producer or source: Crucible Specialty Metals Division, Colt Industries.

CARPENTER STAINLESS 18Cr-2Ni-12Mn

Alloy Digest ◽  
1979 ◽  
Vol 28 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Cold Work ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
High Manganese ◽  
Aisi Type ◽  
Cold Worked ◽  
Type 304

Abstract CARPENTER STAINLESS 18Cr-2Ni-12Mn is a high-manganese, nitrogen-strengthened austenitic stainless steel with an excellent combination of toughness, ductility, strength, fabricability and corrosion resistance. It provides substantially higher yield and tensile strengths than AISI Type 304 and is comparable to Type 304 in corrosion resistance in many environments. It can be machined, cold worked, and welded using the same equipment and methods used for the conventional AISI 300 series austenitic stainless steels. It is nonmagnetic as annealed and after severe cold work. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-366. Producer or source: Carpenter.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

CRUCIBLE 174 SXR

Alloy Digest ◽  
2009 ◽  
Vol 58 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Martensitic Stainless Steels ◽  
Excellent Corrosion Resistance

Abstract Crucible 174 SXR is a premium-quality precipitation-hardening stainless steel designed for use as rifle barrels. It is a modification of Crucible’s 17Cr-4Ni that offers substantially improved machinability without sacrificing toughness. Its excellent corrosion resistance approaches that of a 300 series austenitic stainless steel, while its high strength is characteristic of 400 series martensitic stainless steels. At similar hardness levels, Crucible 174 SXR offers greater toughness than either the 410 or 416 stainless steels which are commonly used for rifle barrels. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming and heat treating. Filing Code: SS-1034. Producer or source: Crucible Service Centers.

ARMCO 25-12

Alloy Digest ◽  
1955 ◽  
Vol 4 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
High Heat ◽  
Temperature Performance ◽  
Aisi Type ◽  
Lower Carbon

Abstract ARMCO 25-12 is an austenitic chromium-nickel stainless steel with high heat resisting qualities, high strength and creep values up to 2000 F. It is equivalent to AISI Type 309 stainless steel; and in the lower carbon grade is equivalent to AISI Type 309S. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-32. Producer or source: Armco Inc., Eastern Steel Division.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 304L

Alloy Digest ◽  
1997 ◽  
Vol 46 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
304L Stainless Steel ◽  
Aisi Type

Abstract Project 70 and Project 7000 Type 304L stainless steels are improved machining versions of conventional AISI Type 304L stainless steel. They have higher tensile and creep strengths than conventional 18-8 stainless steels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-513. Producer or source: Carpenter. Originally published July 1990, revised November 1997.

CARPENTER CUSTOM 450

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Aging Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Single Step ◽  
Good Corrosion Resistance

Abstract CARPENTER CUSTOM 450 stainless steel has very good corrosion resistance, high strength and good fabricating characteristics. A simple, single step aging treatment develops high strength with good ductility and toughness. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-251. Producer or source: Carpenter.

UNITEMP A-286

Alloy Digest ◽  
1974 ◽  
Vol 23 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Solution Treated ◽  
Magnetic Applications ◽  
Cold Worked

Abstract UNITEMP A-286 is an austenitic stainless steel suitable for applications requiring moderately high strength to 1300 F and oxidation resistance to about 1500 F. It is also satisfactory for service as low as 423 F in two conditions: (1) Solution treated plus aged and (2) Cold worked plus aged. This alloy is also used in high-strength non-magnetic applications because it remains essentially non-magnetic even after severe cold working. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-295. Producer or source: Cyclops.

AISI TYPE 305

Alloy Digest ◽  
1964 ◽  
Vol 13 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Magnetic Permeability ◽  
Work Hardening ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Cold Worked

Abstract AISI Type 305 is an austenitic chromium nickel stainless steel with lower rate of work hardening than Type 302 or 304 and less change of magnetic permeability when cold worked. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-154. Producer or source: Alloy steel mills and foundries.

AISI TYPE 414

Alloy Digest ◽  
1989 ◽  
Vol 38 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type Stainless Steel

Abstract AISI TYPE 414 is a martensitic type stainless steel of intermediate hardness. It offers combined corrosion and heat resisting properties with high strength and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-103. Producer or source: Stainless steel mills. Originally published May 1960, revised February 1989.

Sign in / Sign up

Export Citation Format

Share Document