CARPENTER 15-15LC MODIFIED STAINLESS

Alloy Digest ◽  
1995 ◽  
Vol 44 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Permeability ◽  
High Manganese ◽  
Austenitic Alloy ◽  
Good Corrosion Resistance

Abstract 15-15LC MODIFIED STAINLESS is an austenitic alloy with high manganese and nitrogen, with low permeability, and good corrosion resistance. The alloy should be considered in down-hole applications such as drill collars. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating, machining, and joining. Filing Code: SS-588. Producer or source: Carpenter.

CARPENTER 15-15HS MAX STAINLESS

Alloy Digest ◽  
2007 ◽  
Vol 56 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Permeability ◽  
High Manganese ◽  
Austenitic Alloy

Abstract 15-15HS MAX stainless is an austenitic alloy strengthened by both nitrogen and high manganese. It has a low permeability and can be considered for nonmagnetic drill collars. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-988. Producer or source: Carpenter Specialty Alloys.

SOLEIL C5

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fresh Water ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Corrosion Resistance

Abstract SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

AA B443.0

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract AA B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-270. Producer or source: Various aluminum companies.

JESSOP No. 200

Alloy Digest ◽  
1960 ◽  
Vol 9 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Austenitic Steel ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Low Permeability ◽  
Steel Company

Abstract JESSOP No. 200 is a non-magnetic, austenitic steel developed especially for the electrical industry. It has low magnetic permeability and high electrical resistance. Jessop No. 200 is ideal for a great number of applications requiring low permeability material where corrosion resistance is not a factor and where cost is important. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-99. Producer or source: Jessop Steel Company.

COPPER ALLOY No. C93700

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Tin Bronze ◽  
Low Strength

Abstract Copper Alloy No. C93700 is a cast bronze with relatively low strength, good machinability and good corrosion resistance. Commercial names formerly used (not recommended) are (1) High-Leaded Tin Bronze, (2) Ingot No. 305, (3) Bushing and Bearing Bronze and (4) 80-10-10. Its many applications include bearings, bushings, impellers and pressure-tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-421. Producer or source: Copper alloy foundries.

SWISSMETAL SM468C (NIBROFOR/K)

Alloy Digest ◽  
2002 ◽  
Vol 51 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance

Abstract Swissmetal alloy SM468C is a heat treatable copper alloy with high strength and hardness. It has good corrosion resistance and relatively good conductivity. It is used in electrical generators. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-685. Producer or source: Swissmetal Metalworks Ltd, Plant Boillat.

ALUMINUM B443.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract ALUMINUM B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-214. Producer or source: Various aluminum companies.

BIODUR 108 ALLOY

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Austenitic Alloy ◽  
Austenitic Structure ◽  
Very High

Abstract BioDur 108 alloy is an austenitic alloy but is essentially nickel-free. It contains a very high content of nitrogen to maintain the austenitic structure. The major uses for this alloy are in the biochemical industry for products such as implantable orthopedic components. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SS-757. Producer or source: Carpenter.

SILCROME-RA

Alloy Digest ◽  
1958 ◽  
Vol 7 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Type Stainless Steel

Abstract SILCROME-RA is a chromium type stainless steel having good corrosion resistance and mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-79. Producer or source: Allegheny Ludlum Corporation.

SCF 260 ALLOY

Alloy Digest ◽  
2014 ◽  
Vol 63 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
Very High ◽  
High Manganese Content

Abstract Carpenter SCF 260 alloy is an austenitic nitrogen-strengthened stainless steel of very high manganese content. The alloy is used for downhole equipment and where pitting is present. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1167. Producer or source: Carpenter Specialty Alloys.

Sign in / Sign up

Export Citation Format

Share Document