NICROFER 3033

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Acid Production ◽  
Heat Treating ◽  
Localized Corrosion ◽  
High Nitrogen ◽  
Austenitic Alloy ◽  
Sulfuric Acid Production

Abstract Nicrofer 3033, or Alloy 33, is a 31Ni-33Cr austenitic alloy with high nitrogen. The alloy has resistance to strongly oxidizing media, localized corrosion, and caustic media. It is used in sulfuric acid production. See also Alloy Digest Ni-508, revised February 2004. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-687. Producer or source: VDM Technologies Corporation.

HASTELLOY ALLOY D

Alloy Digest ◽  
1956 ◽  
Vol 5 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Boiling Point ◽  
Cast Alloy ◽  
Heat Treating

Abstract HASTELLOY ALLOY-D is a cast alloy composed primarily of nickel and silicon, and is exceptionally resistant to sulfuric acid of all concentrations even up to the boiling point. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-29. Producer or source: Haynes Stellite Company.

VLX 954

Alloy Digest ◽  
1995 ◽  
Vol 44 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sea Water ◽  
Heat Treating ◽  
Localized Corrosion ◽  
Temperature Performance

Abstract VLX 954 is an austenitic stainless steel with 6% (nominal) molybdenum. The alloy is particularly resistant to localized corrosion in sea water and chloride environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-589. Producer or source: DMV Stainless USA Inc.

ZERON 25

Alloy Digest ◽  
1995 ◽  
Vol 44 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Hydrogen Sulfide ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Oil Field ◽  
Localized Corrosion ◽  
Oil Gas

Abstract ZERON 25 is an alloy developed to combat severe oil field duties where oil, gas, water are contaminated with high levels of chlorides and hydrogen sulfide. The alloy has good mechanical strength and resistance to localized corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-584. Producer or source: Weir Material Services Ltd.

URANUS 76N

Alloy Digest ◽  
2009 ◽  
Vol 58 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Localized Corrosion ◽  
High Chromium ◽  
Equivalent Number ◽  
Nitrogen Contents

Abstract URANUS 76N contains high chromium, molybdenum, and nitrogen contents and has a pitting resistance equivalent number (PREN) ≥ 40. These factors explain why the duplex austenitic/ferritic stainless grade is very resistant to localized corrosion. The alloy has been used for offshore applications. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1028. Producer or source: Industeel USA, LLC.

NIROSTA 4640

Alloy Digest ◽  
2008 ◽  
Vol 57 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Low Cost ◽  
Heat Treating ◽  
Austenitic Alloy

Abstract Nirosta 4640 is a low-cost lean austenitic alloy that exhibits many of the same properties as the established alloys such as Type 304SS. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1024. Producer or source: ThyssenKrupp Nirosta GmbH.

CORROSIST-D

Alloy Digest ◽  
1955 ◽  
Vol 4 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Boiling Point ◽  
Cast Alloy ◽  
Heat Treating

Abstract CORROSIST-D is a cast alloy composed primarily of nickel and silicon, and is exceptionally resistant to sulfuric acid of all concentrations even up to the boiling point. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-15. Producer or source: Sheepbridge Stokes Ltd.

CARLSON C20 PLUS

Alloy Digest ◽  
1992 ◽  
Vol 41 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Chemical Industry ◽  
Heat Treating ◽  
Process Equipment ◽  
Good Strength

Abstract CARLSON C20 PLUS alloy is an austenitic stainless steel designed for improved resistance to reducing acids, particularly sulfuric acid. It finds wide use in all phases of the chemical industry and has good strength and fabricability for case in making process equipment and piping. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-535. Producer or source: G.O. Carlson Inc..

NICROFER 2509 Si 7-Alloy 700 Si

Alloy Digest ◽  
1995 ◽  
Vol 44 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Nitric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Silicon Content ◽  
Heat Treating ◽  
Austenitic Alloy ◽  
High Silicon Content ◽  
High Silicon ◽  
Very High

Abstract NICROFER 2509 Si 7-Alloy is an austenitic alloy with very high silicon content to resist concentrated sulfuric and nitric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-582. Producer or source: VDM Technologies Corporation.

URANUS 800 H

Alloy Digest ◽  
1996 ◽  
Vol 45 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Austenitic Alloy

Abstract Uranus 800 is employed at temperatures above 600 deg C (1112 deg F). This austenitic alloy offers good oxidation and creep resistance and is used frequently in petrochemical applications such as for reformers and ethylene crackers. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-650. Producer or source: Creusot-Marrel.

URANUS 2507W

Alloy Digest ◽  
2015 ◽  
Vol 64 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Localized Corrosion ◽  
High Chromium ◽  
Nitrogen Contents

Abstract The high chromium, molybdenum, and nitrogen contents of alloy UR 2507W (PREN ≥ 40) explain why the grade is very resistant to localized corrosion even in acidified oxidizing environments. The alloy has been used for offshore applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1202. Producer or source: Industeel USA, LLC.

Sign in / Sign up

Export Citation Format

Share Document