NIROSTA 4640

Alloy Digest ◽  
2008 ◽  
Vol 57 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Low Cost ◽  
Heat Treating ◽  
Austenitic Alloy

Abstract Nirosta 4640 is a low-cost lean austenitic alloy that exhibits many of the same properties as the established alloys such as Type 304SS. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1024. Producer or source: ThyssenKrupp Nirosta GmbH.

OUTOKUMPU MODA 410L/4003

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Low Cost ◽  
Heat Treating ◽  
Low Carbon ◽  
Alloy Steels ◽  
Corrosive Environments

Abstract Outokumpu Moda 410L/4003 is a weldable, extra low carbon, Cr-Ni, ferritic stainless steel that is best suited for mildly corrosive environments such as indoors, where the material is either not exposed to contact with water or gets regularly wiped dry, or outdoors, where some discoloration and superficial rusting are acceptable. It is a low-cost alternative to low-carbon non-alloy steels in certain applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1330. Producer or source: Outokumpu Oyj.

COPPER ALLOY No. 852

Alloy Digest ◽  
1978 ◽  
Vol 27 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Low Cost ◽  
Heat Treating ◽  
Light Duty ◽  
Yellow Color ◽  
Wide Range ◽  
Copper Zinc

Abstract Copper Alloy No. 852 is a free-machining copper-zinc-lead-tin alloy for castings. It is a relatively low-cost alloy with good machining and polishing characteristics and a pleasing yellow color. Having only moderate strength, it is used in a wide range of light-duty applications such as bushings, valves and plumbing goods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-362. Producer or source: Copper alloy foundries.

NICROFER 2509 Si 7-Alloy 700 Si

Alloy Digest ◽  
1995 ◽  
Vol 44 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Nitric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Silicon Content ◽  
Heat Treating ◽  
Austenitic Alloy ◽  
High Silicon Content ◽  
High Silicon ◽  
Very High

Abstract NICROFER 2509 Si 7-Alloy is an austenitic alloy with very high silicon content to resist concentrated sulfuric and nitric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-582. Producer or source: VDM Technologies Corporation.

URANUS 800 H

Alloy Digest ◽  
1996 ◽  
Vol 45 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Austenitic Alloy

Abstract Uranus 800 is employed at temperatures above 600 deg C (1112 deg F). This austenitic alloy offers good oxidation and creep resistance and is used frequently in petrochemical applications such as for reformers and ethylene crackers. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-650. Producer or source: Creusot-Marrel.

NICROFER 3033

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Acid Production ◽  
Heat Treating ◽  
Localized Corrosion ◽  
High Nitrogen ◽  
Austenitic Alloy ◽  
Sulfuric Acid Production

Abstract Nicrofer 3033, or Alloy 33, is a 31Ni-33Cr austenitic alloy with high nitrogen. The alloy has resistance to strongly oxidizing media, localized corrosion, and caustic media. It is used in sulfuric acid production. See also Alloy Digest Ni-508, revised February 2004. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-687. Producer or source: VDM Technologies Corporation.

OLIN ALLOY 194

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Low Cost ◽  
High Strength ◽  
Heat Treating ◽  
Flexible Hose ◽  
Temperature Performance

Abstract OLIN Alloy 194 was developed to provide a low-cost, high-conductivity, high-strength alloyed copper. It meets these requirements in many and varied applications. Typical uses are electrical terminals and contacts, electrical switches, eyelets and flexible hose. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-360. Producer or source: Olin Corporation, Brass Group.

J & L TYPE 201

Alloy Digest ◽  
1999 ◽  
Vol 48 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Work Hardening ◽  
Heat Treating ◽  
Austenitic Alloy ◽  
Specialty Steel

Abstract J and L type 201 stainless steel is an austenitic alloy with approximately 6.5% manganese. The nickel and chromium contents are lower than typical to allow more work hardening and to obtain high tensile strengths with excellent ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-768. Producer or source: J & L Specialty Steel Inc.

BERYLDUR

Alloy Digest ◽  
1959 ◽  
Vol 8 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Low Cost ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Excellent Corrosion Resistance

Abstract BERYLDUR is a low-cost, easy to work beryllium-copper alloy having age-hardening characteristics, high tensile properties and excellent corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-74. Producer or source: Beryllium Corporation.

NICROFER 3127 HMo-ALLOY 31

Alloy Digest ◽  
1993 ◽  
Vol 42 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Austenitic Alloy ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance ◽  
Acidic Chloride

Abstract NICROFER 3127 hMo, often called Alloy 31, is an austenitic alloy with excellent corrosion resistance to neutral, acidic chloride and oxidizing acidic chlorides, along with having a high pitting index. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-427. Producer or source: VDM Technologies Corporation.

COPPER ALLOY No. 857

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Low Cost ◽  
Heat Treating ◽  
Lead Alloy ◽  
Light Duty ◽  
Yellow Color ◽  
Copper Zinc

Abstract Copper Alloy No. 857 is a free-machining copper-zinc-tin-lead alloy for castings. It is characterized by its pleasing yellow color, good machining and polishing characteristics, and its relatively low cost. It has only moderate strength and is used in light-duty applications such as plumbing goods, valves and ornaments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-342. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document