J&L TYPE 405 STAINLESS STEEL

Alloy Digest ◽  
1999 ◽  
Vol 48 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Structural Material ◽  
Physical Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Continuous Service ◽  
Structural Parts ◽  
Specialty Steel

Abstract J and L type 405 has marginal stainless corrosion resistance. It is used primarily as a structural material. It is serviceable in continuous service up to 704 C (1300 F) and in intermittent exposures up to 816 degrees Celsius (1500 degrees Fahrenheit). It does not harden appreciably when air cooled from high temperatures where some austenite can exist. It is used in structural parts that are not annealed after welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-749. Producer or source: J & L Specialty Steel Inc.

AISI TYPE 405

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Structural Material ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Continuous Service ◽  
Aisi Type

Abstract AISI Type 405 has marginal stainless corrosion resistance. It is used primarily as a structural material. It is serviceable in continuous service up to 1300 F and in intermittent exposures up to 1500 F. It does not harden appreciably when air cooled from high temperatures where some austenite may exist. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-129. Producer or source: Alloy steel mills and foundries. Originally published March 1962, revised April 1988.

J & L TYPE 302

Alloy Digest ◽  
2000 ◽  
Vol 49 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Thermal Treatments ◽  
Annealed Condition ◽  
Temperature Performance ◽  
Cold Worked ◽  
Specialty Steel

Abstract Type 302 (UNS S 30200) stainless steel is an austenitic chromium-nickel stainless steel, nonhardenable by thermal treatments. It may be cold worked to high tensile strengths with slightly lower ductility than type 301. Its corrosion resistance is superior to that of type 301. Type 302 is essentially nonmagnetic in the annealed condition and becomes slightly magnetic when cold worked. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-779. Producer or source: J & L Specialty Steel Inc.

CARPENTER 636

Alloy Digest ◽  
1992 ◽  
Vol 41 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Continuous Service

Abstract CARPENTER 636 is a hardenable stainless steel designed for service up to 1200 F (649 C). It exhibits good resistance to scaling and oxidation in continuous service up to 1400 F (760 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-139. Producer or source: Carpenter. Originally published as Alloy Digest SS-294, December 1962, revised February 1992.

SANDVIK 5R75

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance

Abstract Sandvik 5R75 is a molybdenum-containing austenitic stainless steel with titanium added to prevent intergranular corrosion by tying up the carbon. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-777. Producer or source: Sandvik Steel Company. Originally published March 2000, corrected November 2000.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ARMCO 21-6-9

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Temperature Performance

Abstract Armco 21-6-9 is an austenitic stainless steel alloy designed for use in applications where a combination of high strength and corrosion resistance is desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-125. Producer or source: Armco Inc., Eastern Steel Division.

REPUBLIC RS-110A

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Shear Strength ◽  
High Temperature ◽  
Structural Material ◽  
Physical Properties ◽  
Heat Treating ◽  
Alloying Element ◽  
Temperature Performance ◽  
Medium Strength

Abstract Republic RS-110A is a titanium alloy containing manganese as its principle alloying element. The alloy is a medium strength, highly formable sheet alloy which has been used extensively as an aircraft structural material. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-35. Producer or source: Republic Steel Corporation, Titanium Division.

ALLEGHENY LUDLUM TYPE 305

Alloy Digest ◽  
2002 ◽  
Vol 51 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Work Hardening ◽  
Deep Drawing ◽  
Heat Treating ◽  
Cold Forming ◽  
Temperature Performance ◽  
Low Rate

Abstract Allegheny Ludlum Type 305 (S30500) stainless steel is used for applications requiring a low rate of work hardening during severe cold-forming operations such as deep drawing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-840. Producer or source: Allegheny Ludlum Corporation.

ENDURO 19-9SMo

Alloy Digest ◽  
1968 ◽  
Vol 17 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Thermal Treatment ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Temperature Performance ◽  
Type Stainless Steel

Abstract ENDURO 19-9-SMo is a 19-9 type stainless steel containing molybdenum to greatly increase its resistance to attack by most chemicals. It is nonmagnetic and does not respond to thermal treatment for hardening. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-207. Producer or source: Republic Steel Corporation.

AL 15-7 PRECIPITATION HARDENING ALLOY

Alloy Digest ◽  
1988 ◽  
Vol 37 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Temperature Performance

Abstract Allegheny Ludlum AL 15-7 Alloy is a chromium-nickel-molybdenum-aluminum semi-austenitic stainless steel. It is heat treatable to high strength and it has a moderate level of corrosion resistance. It is available both as a conventionally melted product and as vacuum arc or electroslag refined material. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-496. Producer or source: Allegheny Ludlum Corporation.

Sign in / Sign up

Export Citation Format

Share Document