TANTALOY 63 METAL

Alloy Digest ◽  
1982 ◽  
Vol 31 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Electron Beam ◽  
High Temperature ◽  
Heat Exchangers ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Wide Range ◽  
Better Than

Abstract TANTALOY 63 Metal is a tantalum-base alloy containing typically 2.5% tungsten and 0.15% columbium. It is melted in an electron-beam furance. Its strength is considerably greater than that of unalloyed tantalum. For a wide range of chemicals at elevated temperatures, its corrosion resistance is comparable to or better than that of pure tantalum. Typical appalications are heaters, condensers and multi-tube heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-5. Producer or source: Fansteel Metallurgical Corporation.

UDIMET 105

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract UDIMET 105 is a nickel-base alloy which was developed for service at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-175. Producer or source: Special Metals Corporation.

CARPENTER L-605 ALLOY

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Oxidation And Corrosion

Abstract CARPENTER L-605 alloy is a nonmagnetic cobalt-base alloy that has good oxidation and corrosion resistance and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-81. Producer or source: Carpenter.

MST 821

Alloy Digest ◽  
1958 ◽  
Vol 7 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance

Abstract MST 821 is a weldable titanium-base alloy having a favorable combination of strength, formability and resistance to creep at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-15. Producer or source: Mallory-Sharon Titanium Corporation.

MST 3AL-5CR

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Strength Properties ◽  
Temperature Performance ◽  
Plate Forging

Abstract MST 3AL-5CR is a double melted titanium base alloy available in either ingot, bar, rod, plate, forging, or extrusion form. It possesses good creep and high strength properties at room and elevated temperatures to 800 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-4. Producer or source: Mallory-Sharon Titanium Corporation. Originally published June 1954, revised March 1965.

BÖHLER L022

Alloy Digest ◽  
2012 ◽  
Vol 61 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Corrosive Media ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Wide Range ◽  
Nickel Base

Abstract Böhler (or Boehler) L022 is a nickel base alloy with very good corrosion resistance. The alloy is used for handling a wide range of corrosive media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: Ni-703. Producer or source: Böhler Edelstahl GmbH & Company KG.

MST 2.5Al-16V

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Temperature Performance ◽  
Hardening Heat Treatment

Abstract MST 2.5A1-16V is a titanium-base alloy having a favorable combination of strength, formability and resistance to creep at elevated temperatures. It responds to an age-hardening heat treatment. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-24. Producer or source: Mallory-Sharon Metals Company.

WC-Ta-10W

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Low Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Structural Applications

Abstract WC Ta-10W is a tantalum-base alloy having a combination of low-temperature ductility and fabricability in both the recrystalilzed and wrought conditions, as well as excellent weld ductility. Developed originally for structural applications at elevated temperatures, it is now available in a complete line of aerospace hardware. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-1. Producer or source: Teledyne Wah Chang Albany.

BÖHLER L276

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Corrosive Media ◽  
Temperature Performance ◽  
Wide Range ◽  
Nickel Base

Abstract Böhler (or Boehler) L276 is a nickel base alloy with very good corrosion and pitting resistance. The alloy is used for handling a wide range of corrosive media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-705. Producer or source: Böhler-Uddeholm North America.

UNS R54521

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract UNS No. R 54521 is the weldable high-strength titanium-base alloy. It combines high strength at elevated temperatures with excellent welding characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-91. Producer or source: Titanium mills.

UDIMET 115

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract UDIMET 115 is a precipitation hardenable nickel-base alloy which was developed for service at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-168. Producer or source: Special Metals Corporation.

Sign in / Sign up

Export Citation Format

Share Document