REPUBLIC RS-135

Alloy Digest ◽  
1959 ◽  
Vol 8 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Titanium Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Steel Corporation

Abstract REPUBLIC RS-135 is a bar and forging heat treatable titanium alloy recommended for use up to 1000 F. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ti-22. Producer or source: Republic Steel Corporation, Titanium Division.

TOUGHTEM

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation ◽  
Forging Die

Abstract TOUGHTEM is a chromium-nickel-molybdenum, low-alloy, hot-work steel which has been developed especially for forging die-block applications. It has excellent through-hardening characteristics and good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-491. Producer or source: Uddeholm Steel Corporation.

CROMO-WV

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Bethlehem Steel Corporation ◽  
Temperature Performance ◽  
Steel Corporation

Abstract Cromo-WV is a 5% chromium-tungsten-vanadium-molybdenum tool steel for all general-purpose hot-work tools and dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-250. Producer or source: Bethlehem Steel Corporation.

MST 881

Alloy Digest ◽  
1960 ◽  
Vol 9 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Long Time ◽  
Short Time

Abstract MST 881 is a titanium alloy capable of holding properties to 1100 F. It extends the useful temperature range of titanium alloys to 1100 F for long-time applications and to 1600 F for short-time applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-25. Producer or source: Mallory-Sharon Metals Company.

TIMETAL 1100

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Titanium Alloy ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Temperature Performance

Abstract TIMETAL 1100, a near alpha alloy, was developed for elevated temperature use around 1100 F (600 C). The alloy is to be used in the beta processed condition. The alloy offers the highest combination of strength, creep resistance, fracture toughness, and stability of any commercially available titanium alloy. This datasheet provides information on composition, physical properties, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TI-104. Producer or source: Timet.

HOTFORM No. 1

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Vanadium Alloys ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation

Abstract HOTFORM No. 1 is a 5% chromium hot work steel containing molybdenum, tungsten and vanadium. It has maximum toughness at high strength levels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness, and deformation. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-60. Producer or source: Vanadium Alloys Steel Corporation.

COPPER ALLOY No. 230

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Single Phase ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 230 is a single-phase brass containing 15% zinc which is the most widely used of the low zinc brasses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-252. Producer or source: Brass mills.

DMV 59

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract DMV 59 is the material of choice for a wide variety of applications where significant corrosion resistance and high mechanical strength is necessary. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-672. Producer or source: Mannesmann DMV Stainless USA Inc.

INCONEL ALLOY N06230

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Inconel Alloy N06230 is a Ni-Cr-W alloy with excellent strength and resistance to oxidation at elevated temperatures. This alloy offers good metallurgical stability and is readily fabricated by conventional processes and procedures. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-667. Producer or source: Special Metals Corporation.

UNITEMP WASPALOY

Alloy Digest ◽  
1974 ◽  
Vol 23 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Nickel Base ◽  
Corrosion And Oxidation

Abstract UNITEMP WASPALOY is a nickel-base, austenitic precipitation-hardenable alloy. It has excellent strength and good resistance to corrosion and oxidation at temperatures at least to 1600 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-46. Producer or source: Cyclops Corporation. Originally published November 1958, revised March 1974.

ALUFONT-3

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Temperature Performance

Abstract ALUFONT-3 is a heat treatable aluminum sand casting alloy having good machinability with fair castability. It is a high strength casting alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Al-40. Producer or source: Aluminium Industrie Atkiengesellschaft.

Sign in / Sign up

Export Citation Format

Share Document