RED CUT SUPERIOR

Alloy Digest ◽  
1979 ◽  
Vol 28 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heat Treat

Abstract RED CUT SUPERIOR is a high-speed steel of the 18% tungsten-4% chromium-1% vanadium type. Many consider it to be the best type of high-speed steel for general purposes. It is comparatively easy to fabricate and simple to heat treat. It has a minimum tendency to decarburize and an excellent combination of cutting ability and toughness. Its many uses include drills, reamers, milling cutters, lathe tools, punches, dies and springs for use at elevated temperature. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-355. Producer or source: Teledyne Vasco.

MOTUNG 652

Alloy Digest ◽  
1957 ◽  
Vol 6 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sulfur Content ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Bend Strength ◽  
Machining Properties

Abstract MOTUNG 652 is an intermediate molybdenum-tungsten type of high-speed steel conforming to the M-2 analysis. It is available with normal sulfur content or with high sulfur for free machining properties. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-61. Producer or source: Cyclops Corporation.

AISI TYPE M2

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE M2 is a molybdenum-tungsten high-speed steel with a balanced analysis which produces properties applicable to all general-purpose high-speed uses. It has an excellent balance between toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-240. Producer or source: Tool steel mills.

ELECTRITE No. 1 and No. 1XL

Alloy Digest ◽  
1957 ◽  
Vol 6 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Aisi Type ◽  
Red Hardness

Abstract ELECTRITE No. 1 is a standard 18.4-1 type high-speed steel having high density, extremely good wear resisting properties. It possesses a high red hardness when used for cutting and shearing tools. It corresponds to AISI Type T1 Tool Steel. This same type steel is also supplied containing sulphide additive and is called Electrite No. 1 XL. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-62. Producer or source: Latrobe Steel Company.

Ti-155A

Alloy Digest ◽  
1959 ◽  
Vol 8 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Titanium Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Heat Treat

Abstract T1-155A is a titanium alloy having guaranteed heat treat capability up to 175,000 psi tensile strength for bark stock and 180,000 psi for forging stock. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-19. Producer or source: Titanium Metals Corporation of America.

AL TECH LMW-V

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Specialty Steel ◽  
Toughness Characteristic

Abstract AL Tech LMW-V is a molybdenum-type high-speed steel used extensively by domestic cutting-tool makers. It was designed to offer increased wear resistance while retaining the toughness characteristic of molybdenum-type high-speed steels. It is suitable for a wide variety of cutting-tool applications where improved resistance to abrasion is desired. Typical applications include twist dri milling cutters. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-353. Producer or source: AL Tech Specialty Steel Corporation.

SPEED STAR

Alloy Digest ◽  
1976 ◽  
Vol 25 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Fine Grained

Abstract SPEED STAR is a fine-grained molybdenum-tungsten high-speed steel with an excellent combination of wear resistance and toughness. Among its many uses are lathe tools, drills, gear cutters and wood knives. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-303. Producer or source: Carpenter.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

BUNTING ALLOY 907

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Tin Bronze ◽  
Standard Alloy

Abstract BUNTING Alloy 907 is a cast copper-tin alloy (tin bronze) recommended for severe service requirements. It is used widely for bearings and gears. It is a standard alloy for the manufacture of cast gear blanks and has long been known as Phosphor Gear Bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-328. Producer or source: NL Industries Inc., Bearing Division.

FEDERAL BRONZE 822

Alloy Digest ◽  
1976 ◽  
Vol 25 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Copper Base ◽  
High Speeds ◽  
High Lead

Abstract FEDERAL BRONZE 822 is a copper-base, high-lead bearing bronze with superior resistance to scoring and seizure beyond the endurance and danger limits of ordinary bearing bronzes. It is used in applications involving high speeds, poor lubrication, heat-generating loads, elevated temperatures, dusty and gritty surroundings, or where a liquid other than oil is used as the lubricant. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-324. Producer or source: Federal Bronze Products Inc..

LUMEN ALLOY 9

Alloy Digest ◽  
1957 ◽  
Vol 6 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sea Water ◽  
Heat Treating

Abstract UMEN ALLOY 9 is a manganese bronze having excellent combination of strength and corrosion resistance in fresh and sea water. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-57. Producer or source: Lumen Bearing Company.

Sign in / Sign up

Export Citation Format

Share Document