AL TECH A-HT

Alloy Digest ◽  
1986 ◽  
Vol 35 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Wear Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Aisi Type ◽  
Low Distortion ◽  
Specialty Steel ◽  
Very High

Abstract AL TECH A-HT is a tool steel for difficult cold-work applications. It is somewhat similar to AISI Type A2 in alloy content but with increased wear resistance. Additions of titanium and tungsten produce hard, long-wearing carbides that help to decrease galling and metal pick-up. The main advantages of AL TECH A-HT are: (1) Very high wear resistance, (2) Good toughness, (3) Air hardening and (4) Low distortion in heat treatment. A-HT is used where better wear resistance is required than is attainable using AISI Type A2 or better toughness than AISI Type D2. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-457. Producer or source: AL Tech Specialty Steel Corporation.

AL TECH APACHE

Alloy Digest ◽  
1987 ◽  
Vol 36 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Cold Work ◽  
Heat Treating ◽  
High Alloy ◽  
Die Steel ◽  
Die Steels ◽  
Low Distortion ◽  
Specialty Steel ◽  
Size Tolerance

Abstract AL TECH APACHE is an air-hardening, cold-work die steel that exhibits less distortion during heat treatment than water or oil-hardening steels and most high-alloy, air-hardening die steels. Its low-distortion characteristic makes it particulary attractive for applications where close size tolerance is important, such as master hubs, trim dies, molds for plastics, bending tools, notching dies and coining dies. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-472. Producer or source: AL Tech Specialty Steel Corporation.

VANADIS 6

Alloy Digest ◽  
2006 ◽  
Vol 55 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Powder Metallurgy ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Abrasive Tool ◽  
Powder Metal ◽  
Cold Work Tool Steel ◽  
Very High

Abstract Vanadis 6 is a high powder metallurgy cold-work tool steel offering a combination of very high wear resistance and good toughness. It is used for long stamping runs of working materials that tend to cause mixed adhesive and abrasive tool wear. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, surface treatment, and powder metal forms. Filing Code: TS-637. Producer or source: Böhler-Uddeholm North America.

DEWARD

Alloy Digest ◽  
1976 ◽  
Vol 25 (12) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Die Steel ◽  
Satisfactory Performance ◽  
Specialty Steel ◽  
Minimum Distortion

Abstract DEWARD is an oil-hardening, non-deforming, manganese die steel that is characterized by uniformity, good machinability and satisfactory performance in service. Its composition permits a relatively low hardening temperature to give minimum distortion after heat treatment and little danger of cracking. It has good wear resistance and gives excellent results when used for all kinds of intricate tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-310. Producer or source: AL Tech Specialty Steel Corporation.

BETHLEHEM A-HT

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
High Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
Bethlehem Steel Corporation ◽  
Aisi Type ◽  
Shock Resistance ◽  
Resistance To Wear ◽  
Low Distortion

Abstract BETHLEHEM A HT is a tool steel for cold-work applications. It is characterized by high resistance to wear, low distortion in heat treatment and air hardening; in fact, it is superior to AISI Type A2 for wearability and shock resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-272. Producer or source: Bethlehem Steel Corporation.

DURATECH XTREME

Alloy Digest ◽  
2008 ◽  
Vol 57 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Heat Treating ◽  
High Impact ◽  
Extreme Conditions ◽  
Powder Metal ◽  
Steel Company ◽  
Specialty Steel ◽  
Very High ◽  
Hot Hardness

Abstract DuraTech Xtreme has very high impact toughness, high hot hardness, and good wear resistance. As indicated in the name, the alloy is intended for use in extreme” conditions. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and powder metal forms. Filing Code: TS-663. Producer or source: Latrobe Specialty Steel Company.

TOUGHTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Cold Work Tool Steel

Abstract Toughtec SF is a spray-formed cold-work tool steel offering a combination of high wear resistance and very good ductility. Toughtec SF is suitable for the production of hot shearing dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-648. Producer or source: Böhler-Uddeholm North America.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2210

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
High Carbon ◽  
High Toughness ◽  
Temperature Performance ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel ◽  
Very High

Abstract Deutsche Edelstahlwerke Cryodur 2210, also known as silver steel, is a high-carbon, Cr-V, alloy cold-work tool steel that is primarily used for short-run tooling requiring low-to-medium wear resistance and very high toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-806. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

UDDEHOLM VANADIS 8 SUPERCLEAN

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
High Carbon ◽  
Long Run ◽  
Powder Metallurgy Process ◽  
Cold Work Tool Steel ◽  
Metallurgy Process ◽  
Very High

Abstract Uddeholm Vanadis 8 SuperClean is a high-carbon, Cr-Mo-V, alloy cold work tool steel that is produced by the powder metallurgy process. It is suitable for very long run tooling where a combination of very high wear resistance and good chipping resistance is required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-804. Producer or source: Uddeholms AB (a voestalpine company).

ROLTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Good Resistance ◽  
Cold Work Tool Steel

Abstract Roltec SF is a spray formed cold-work tool steel offering a combination of high wear resistance and very good resistance to chipping and cracking. Roltec SF is suitable for the production of rolls and slitter knives. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-644. Producer or source: Böhler-Uddeholm North America.

APACHE

Alloy Digest ◽  
1976 ◽  
Vol 25 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Die Steel ◽  
Low Distortion ◽  
Size Tolerance

Abstract APACHE is an air-hardening, cold-work die steel that exhibits less distortion during heat treatment than water or oil-hardening steel and many other air-hardening steels. Its low-distortion characteristic makes it attractive for applications where close size tolerance is important. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-295. Producer or source: Allegheny Ludlum Corporation.

Sign in / Sign up

Export Citation Format

Share Document