THYRAPID 3343

Alloy Digest ◽  
1998 ◽  
Vol 47 (2) ◽  
Keyword(s):  
High Speed ◽  
Metal Cutting ◽  
Alloy Composition ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Steel Grade ◽  
High Toughness ◽  
Circular Saws ◽  
Twist Drills

Abstract Thyrapid 3343 is a standard high-speed steel grade with balanced alloy composition, high toughness, good cutting power, and consequently versatile applications. Thyssen Thyrapid 3343 is suitable for all metal-cutting tools for roughing or finishing, such as twist drills, milling cutters of all types, taps, cutting tools, broaches, reamers, countersinks, chasens, segments for circular saws, shaping tools, and woodworking tools. This datasheet provides information on composition and physical properties. It also includes information on heat treating and machining. Filing Code: TS-560. Producer or source: Thyssen Specialty Steels Inc.

GUTERL M-2

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance ◽  
Special Steel ◽  
Steel Corporation ◽  
Circular Saws

Abstract GUTERL M-2 is a molybdenum-tungsten type of high-speed steel with fairly good resistance to decarburization. It is a general-purpose high-speed steel and it provides excellent resistance to abrasion and shock. It is used widely for cutting tools. Among its many applications are hack saws, circular saws, lathe tools, gear cutters, planer tools and wood knives. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-387. Producer or source: Guterl Special Steel Corporation.

GUTERL M-1

Alloy Digest ◽  
1981 ◽  
Vol 30 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Heavy Duty ◽  
Red Hardness ◽  
Circular Saws ◽  
Twist Drills

Abstract GUTERL M-1 is a highly-molybdenum, low-tungsten type of high-speed tool steel. It is a general-purpose high-speed steel with an excellent combination of cutting ability, finishing characteristics and toughness. Guterl M-1 has good cutting ability for all operations except for heavy-duty, continuous cutting applications that require the ultimate in red hardness. Its toughness is as great as that of other high-speed steels. Its typical uses include circular saws, broaches, gear cutters, twist drills and taps. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-391. Producer or source: Guterl Special Steel Corporation.

TNW

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Vanadium Content ◽  
Cold Forming ◽  
Molybdenum Steel ◽  
End Mills ◽  
Forming Tools ◽  
Twist Drills

Abstract TNW is a high-speed steel. It has an optimum alloy composition that combines the good toughness characteristics of a high-molybdenum steel and the excellent abrasion resistance provided by a 2% vanadium content. TNW is a popular choice for twist drills, taps, reamers, router bits, end mills and other similar cutting tools. Also its good toughness makes it well suited to punches and other difficult cold-forming tools requiring the properties of a high-speed steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-433. Producer or source: Latrobe Steel Company.

BETHLEHEM M-10

Alloy Digest ◽  
1975 ◽  
Vol 24 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Multiple Point ◽  
Bethlehem Steel Corporation ◽  
M 10 ◽  
Twist Drills

Abstract BETHLEHEM M-10 is a high-molybdenum type of high-speed steel. It is a general-purpose steel for cutting tools such as twist drills and is used for many other single- and multiple-point cutting applications. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-286. Producer or source: Bethlehem Steel Corporation.

AISI TYPE T5

Alloy Digest ◽  
1981 ◽  
Vol 30 (10) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Depth Of Cut ◽  
Heavy Duty ◽  
Aisi Type ◽  
High Production ◽  
Red Hardness ◽  
Twist Drills

Abstract AISI Type T5 is a tungsten high-speed steel to which cobalt (8.9%) is added to provide high and unusual red hardness. It is particularly well adapted for heavy-duty cutting and high-production cutting tools. Because of its high red hardness, a cutting edge can be maintained under conditions of speed, feed and depth of cut that would not be possible with ordinary high-speed steels. Typical applications of AISI Type T5 are lathe and planer tools, reamers, milling cutters and twist drills for heavy-duty cutting. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-389. Producer or source: Tool steel mills.

REX TMO

Alloy Digest ◽  
1984 ◽  
Vol 33 (11) ◽  
Keyword(s):  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Soft Or ◽  
Hard Materials ◽  
End Mills ◽  
Fast Light ◽  
Circular Saws ◽  
Twist Drills

Abstract REX TMO molybdenum-tungsten high-speed steel is a tough, general-purpose high-speed steel with high cutting efficiency and excellent finishing properties. It is adapted to fast light cuts on soft or medium hard materials. Among its many applications are blanking dies, twist drills, circular saws, end mills, lathe tools, punches, slotting saws and woodworking tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-432. Producer or source: Crucible Specialty Metals Division, Colt Industries.

UNS T11310

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS No. T11310 is the high vanadium type of molybdenum high-speed steel. It is a deep-hardening steel and offers high cutting ability and excellent finishing properties. It is a general-purpose steel for cutting tools and is used in such applications as taps, lathe tools and reamers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: TS-490. Producer or source: Tool steel mills.

AISI TYPE M7

Alloy Digest ◽  
1987 ◽  
Vol 36 (10) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Significant Loss ◽  
Steel Mills ◽  
Aisi Type ◽  
End Mills ◽  
The Many ◽  
Twist Drills

Abstract AISI Type M7 is a molybdenum type of high-speed steel. It is somewhat similar to AISI Type M1 tool steel but with higher percentages of carbon and vanadium to provide an improvement over AISI Type M1 in cutting characteristics without a significant loss in toughness. It is suitable for a wide variety of cutting-tool applications where improved resistance to abrasion is required. The many uses of Type M7 include twist drills, end mills, shear blades, punches, milling cutters, lathe tools, taps and reamers. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-483. Producer or source: Tool steel mills. See also Alloy Digest TS-468, January 1987.

ELECTRITE COBALT

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Steel Company

Abstract ELECTRITE COBALT is a 5% cobalt type high-speed steel recommended for heavy duty cutting tools. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-89. Producer or source: Latrobe Steel Company.

VASCO 8-N-2

Alloy Digest ◽  
1979 ◽  
Vol 28 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose

Abstract VASCO 8-N-2 is a molybdenum high-speed steel containing a low percentage of tungsten. It can be used successfully for a variety of cutting tools; in fact, it is a general-purpose high-speed steel. Its composition represents the first molybdenum high-speed steel to be manufactured and find practical use in the field of cutting tools. Its many uses include drills, milling cutters, lathe tools, blanking dies and special shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-351. Producer or source: Teledyne Vasco.

Sign in / Sign up

Export Citation Format

Share Document