MICROZINC ALLOY 190

Alloy Digest ◽  
1976 ◽  
Vol 25 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Copper Alloy ◽  
Atmospheric Corrosion ◽  
Sliding Friction ◽  
Heat Treating ◽  
Coefficient Of Sliding Friction ◽  
Chemical Division ◽  
Processing Differences

Abstract MICROZINC Alloy 190 is a zinc-copper alloy with good atmospheric corrosion resistance and a low coefficient of sliding friction to eliminate galling in service. It has maximum strength commensurate with good ductility and drawability. Processing differences give two commercial products or classes designated 191 and 192. This alloy does not stain other materials. Its many uses include terrazzo strips, eyelets and weatherstrips. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-29. Producer or source: Ball Corporation, Metal and Chemical Division.

MICROZINC ALLOY 100

Alloy Digest ◽  
1976 ◽  
Vol 25 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Sliding Friction ◽  
Heat Treating ◽  
Good Resistance ◽  
Coefficient Of Sliding Friction ◽  
Chemical Division ◽  
Processing Differences ◽  
Magnetic Processing

Abstract MICROZINC Alloy 100 is a zinc-lead-cadmium alloy having good ductility with adequate strength, good resistance to corrosion, and a low coefficient of sliding friction. It is solderable and non-magnetic. Processing differences give three commercial products or classes designated= 101, 102 and 103. This alloy does not stain other materials. Its many uses include jewelry, coins and battery cans. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-27. Producer or source: Ball Corporation, Metal and Chemical Division.

COPPER ALLOY No. 411

Alloy Digest ◽  
1975 ◽  
Vol 24 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition

Abstract Copper Alloy No. 411 is brass with a small addition of tin. It has good formability, weldability and corrosion resistance and is recommended for such applications as bearings, bushings, jewelry and stamped hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-296. Producer or source: Brass mills.

MUNTZ METAL

Alloy Digest ◽  
1955 ◽  
Vol 4 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Strength ◽  
Copper Zinc

Abstract MUNTZ METAL is a 60-40 copper-zinc alloy having good strength but low ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-25. Producer or source: Copper alloy mills.

ALUMINUM 2011

Alloy Digest ◽  
1978 ◽  
Vol 27 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Screw Machine ◽  
Aluminum Copper Alloy

Abstract ALUMINUM 2011 is an age-hardenable aluminum-copper alloy to which lead and bismuth are added to make it a free-machining alloy. It has good mechanical properties and was designed primarily for the manufacture of screw-machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-32. Producer or source: Various aluminum companies. Originally published October 1955, revised December 1978.

COPPER ALLOY No. 120

Alloy Digest ◽  
1972 ◽  
Vol 21 (12) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Residual Phosphorus ◽  
Low Level

Abstract COPPER No. 120 is a phosphorus deoxidized copper in which the residual phosphorus is maintained at a low level to acheive a good electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-263. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. 210

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Cold Working ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 210 is a 5% zinc brass having excellent cold working properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-255. Producer or source: Brass mills.

COPPER ALLOY No. 230

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Single Phase ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 230 is a single-phase brass containing 15% zinc which is the most widely used of the low zinc brasses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-252. Producer or source: Brass mills.

COPPER ALLOY No. 675

Alloy Digest ◽  
1971 ◽  
Vol 20 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Copper Zinc

Abstract COPPER ALLOY No. 675 is a copper-zinc alloy having excellent mechanical properties and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-244. Producer or source: Brass mills.

COPPER ALLOY No. 260

Alloy Digest ◽  
1971 ◽  
Vol 20 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract COPPER ALLOY No. 260 is a 70% copper-30% zinc alloy having high strength, excellent ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-241. Producer or source: Brass mills.

COPPER ALLOY No. 314

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Alloy ◽  
Screw Machine ◽  
Copper Zinc ◽  
Machine Parts

Abstract Copper Alloy No. 314 is a copper-zinc-lead alloy with moderate strength and good ductility. It has good electrical conductivity, excellent machinability and a rich bronze color. Its uses include electrical connectors, screw-machine parts and builders' hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-357. Producer or source: Brass mills.

Sign in / Sign up

Export Citation Format

Share Document