Applications of C-AFM and CBED Techniques to the Characterization of Substrate Dislocations Causing SRAM Soft Single-Column Failure Contained in a Wafer with (001) Plane/[100] Notch

SRAM memory is an ideal vehicle for defect monitoring and yield improvement during process development because of its highly structured architecture. However, the success rate of defect detection, especially for soft single-column failures, is decreasing when traditional physical failure analysis (PFA) with only the bitmap is available for guidance. This is due to a variety of invisible or undetectable defects that cause leakage in the device. In order to understand the leakage behavior in advanced high voltage (HV) processes, a Conductive Atomic Force Microscope (C-AFM) [1-4] is introduced to perform junction-level fault isolation prior to attempting PFA. According to J. P. Morniroli [5], crystalline defects affect convergent-beam electron diffraction (CBED) and large angle convergent-beam electron diffraction (LACBED) patterns, so CBED and LACBED techniques were also applied to the specimens containing dislocations to allow further characterization of these defects. In this study quantified data extracted using the C-AFM is also used to establish a connection between the failure mechanism discovered and the soft single column failure mode.