scholarly journals DIRECT POWER CONTROL OF A DFIG BASED WIND TURBINS UNDER UNBALANCED GRID VOLTAGE WITHOUT ROTOR POSITION SENSOR

2017 ◽  
Vol 18 (1) ◽  
pp. 57-71
Author(s):  
Ali Izanlo ◽  
Asghar Gholamian ◽  
Mohammad Verij kazemi

In this paper, the behavior of a doubly fed induction generator (DFIG) is proposed under unbalanced grid voltage and without using a rotor position sensor. There are two main methods that are been used for the detection of rotor position: using shaft sensor and sensorless algorithm. In this paper the shaft sensor is eliminated and a position sensorless algorithm is used for estimating the rotor position. Sensorless operation is more desirable than using shaft sensor, because the shaft sensor has several disadvantages related to the cost, cabling, robustness and maintenance. Also, during network unbalance, three selectable control targets are identified for the rotor side converter (RSC), i.e., obtaining sinusoidal and symmetrical stator currents, mitigation of active and reactive powers ripples and the cancellation of electromagnetic torque oscillations. The effectiveness of the proposed control strategy is confirmed by the simulation results from a 2-MW DFIG system. It is concluded that the sensorless algorithm is able to produce accurate results similar to the case of that used from shaft sensor and it can be used in the practical applications.

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3155
Author(s):  
Akrama Khan ◽  
Xiao Ming Hu ◽  
Mohamed Azeem Khan ◽  
Paul Barendse

In this paper, a systematic synchronization procedure is proposed for a doubly fed induction generator (DFIG) during unbalanced grid voltage conditions. The initial induced voltage at the open stator terminal is required to synchronize with the grid voltage in magnitude, frequency and phase. An open stator negative sequence rotor current controller is implemented with the conventional DFIG vector controller, which allows the induced stator voltage to become as unbalanced as the grid voltage, hence enabling a smooth connection. A brief comparison is provided for practical issues such as controller structure variation between DFIG open stator and normal operating conditions, and initial encoder rotor angle measurement offset. The procedure is validated experimentally on a 2.2 kW laboratory-scaled DFIG test bench.


Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 454 ◽  
Author(s):  
Imran Khan ◽  
Kamran Zeb ◽  
Waqar Din ◽  
Saif Islam ◽  
Muhammad Ishfaq ◽  
...  

High penetration of large capacity wind turbines into power grid has led to serious concern about its influence on the dynamic behaviors of the power system. Unbalanced grid voltage causing DC-voltage fluctuations and DC-link capacitor large harmonic current which results in degrading reliability and lifespan of capacitor used in voltage source converter. Furthermore, due to magnetic saturation in the generator and non-linear loads distorted active and reactive power delivered to the grid, violating grid code. This paper provides a detailed investigation of dynamic behavior and transient characteristics of Doubly Fed Induction Generator (DFIG) during grid faults and voltage sags. It also presents novel grid side controllers, Adaptive Proportional Integral Controller (API) and Proportional Resonant with Resonant Harmonic Compensator (PR+RHC) which eliminate the negative impact of unbalanced grid voltage on the DC-capacitor as well as achieving harmonic filtering by compensating harmonics which improve power quality. Proposed algorithm focuses on mitigation of harmonic currents and voltage fluctuation in DC-capacitor making capacitor more reliable under transient grid conditions as well as distorted active and reactive power delivered to the electric grid. MATLAB/Simulink simulation of 2 MW DFIG model with 1150 V DC-linked voltage has been considered for validating the effectiveness of proposed control algorithms. The proposed controllers performance authenticates robust, ripples free, and fault-tolerant capability. In addition, performance indices and Total Harmonic Distortions (THD) are also calculated to verify the robustness of the designed controller.


Sign in / Sign up

Export Citation Format

Share Document