Photogrammetric Surveys and GIS application for Cultural Heritage conservation management: a case study from Catania?s historical buildings

2021 ◽  
Vol 140 (3) ◽  
pp. 1-13
Author(s):  
Antonio Stroscio ◽  
Germana Barone ◽  
Giorgio De Guidi ◽  
Maura Fugazzotto ◽  
Roberta Occhipinti ◽  
...  
2019 ◽  
Vol 4 (1) ◽  
pp. 64
Author(s):  
Rachadian Hadiwibowo

There is a need for easier vertical circulation facilities, especially given the need for people with disabilities and parents in historic buildings, especially in buildings that still function as public buildings to date. This is because in general these buildings use stairs as a means of vertical circulation while the activities inside have increased so that more efficient vertical circulation is needed such as elevators. The problem is how to determine the placement of vertical circulation facilities in historical buildings, which sometimes do not accommodate the placement of new vertical circulation facilities and placement should be in locations that are easily accessible and seen by users but at the same time also pay attention to the rules of buildingconservation rules. This study aims to show the use of the Space Syntaxmethod can be used in conjunction with the conservation study of historic buildings to determine the placement of vertical circulation facilities in buildings as a space study tool that will determine the location of placement in terms of accesibility and connectedness of space which will then be used to determine placement new elements in the building while paying attention to the principles of cultural heritage conservation. The study used quantitative methods of ekseprimental simulation with the use of Depthmap's computer program as a tool for analysis of simulation of the Space Syntaxmethod, supported by heritage provisions as a guide to limits of changes allowed in cultural heritage buildings. The results showed that the use of Space Syntaxcan be used in conjunction with the analysis of building conservation to determine elevator placement in locations that pay attention to the study of ease of achievement and observation of usersbut still pay attention to the influence of the placement on historical and architectural elements of the building shown in the case study of the UNPAR building Jl.merdeka no.30 Bandung.


Author(s):  
HARLINA MD. SHARIF ◽  
HAZMAN HAZUMI ◽  
IMAN ASILAH HISHAMUDDIN

Pemuliharaan warisan budaya adalah proses kompleks yang memerlukan kaedah dan teknik yang inovatif untuk memudahkan pemulihan, pengurusan dan penentuan nilai. Dokumentasi aset warisan yang tepat sangat penting dalam memastikan bahawa sebarang perubahan, pembaikan, penambahan atau perobohan bahagian aset dicatat dengan betul untuk mengekalkan kesahihan aset. Tujuan kajian ini adalah memperlihatkan kelebihan aplikasi imbasan-ke-BIM dalam mendokumenkan aset warisan budaya di Malaysia sebagai prosedur kritikal dalam langkah-langkah untuk memelihara aset tersebut. Metodologi yang digunakan dalam kajian ini adalah mod campuran. Data utama diperoleh daripada penggunaan pengimbas laser 3D (3DTLS) pada peringkat peninjauan di bangunan Gedung Raja Abdullah, Klang, Selangor, Malaysia. Kajian ini menganalisis kelebihan imbasan-ke-BIM untuk menentukan kaedah amalan terbaik dalam mendokumenkan bangunan-bangunan bersejarah dan menguruskan aset warisan budaya. Hasil daripada kajian ini menunjukkan kepelbagaian data yang dikumpul melalui imbasan-ke-BIM yang membolehkan mereka dimanipulasi ke dalam bentuk yang berbeza, yang kemudiannya boleh digunakan untuk pelbagai tujuan.   Cultural heritage conservation is a complex process requiring innovative methods and techniques to facilitate its restoration, management and valorization. Accurate documentation of heritage assets is crucial in ensuring that any changes, repair, addition or demolition of parts of the assets are properly recorded to maintain the authenticity of the assets. The aim of this study is to establish the advantages of scan-to-BIM application in documenting cultural heritage assets in Malaysia as a critical procedure in the steps to conserve the asset. The methodology adopted in this study is mixed mode. Primary data is acquired from the use of 3D laser scanner (3DTLS) at reconnaissance stage on Gedung Raja Abdullah building, Klang, Selangor, Malaysia. This study analyses the Scan-to-BIM advantages in order to ascertain the best practice method in documenting historical buildings and managing cultural heritage assets. The output from this study demonstrates the versatility of data collected through Scan-to-BIM that allows them to be manipulated into different forms, which subsequently can be used for various purposes.


2021 ◽  
Author(s):  
Yifeng Wen

In this article Lingnan Impression Park is taken as case study to research on integrated strategies of cultural heritage conservation with the purpose of its adapted reuse. In process exploitation, a combined strategy reusing architecture heritage is adopted, to produce an atmosphere of traditional Lingnan (Cantonese) culture for tourism development. This strategy has advantages for material recycle, construction energy saving and environmental protection, but arising an issue concerning heritage’s authenticity. It is regarded that it must be adopted a cultural ecology’s views to deal with the concept of authenticity especially in circumstance of heritage reuse with tourism exploitation.


2019 ◽  
Vol 37 ◽  
pp. 215-224 ◽  
Author(s):  
Helena Hirsenberger ◽  
Jonjaua Ranogajec ◽  
Snezana Vucetic ◽  
Bojan Lalic ◽  
Danijela Gracanin

Sign in / Sign up

Export Citation Format

Share Document