scholarly journals Noise Reduction Effect of Superhydrophobic Surfaces with Streamwise Strip of Channel Flow

2021 ◽  
Vol 11 (9) ◽  
pp. 3869
Author(s):  
Chen Niu ◽  
Yongwei Liu ◽  
Dejiang Shang ◽  
Chao Zhang
Keyword(s):  
Reynolds Number ◽  
Drag Reduction ◽  
Noise Reduction ◽  
Channel Flow ◽  
Superhydrophobic Surface ◽  
Sound Field ◽  
Flow Noise ◽  
Slip Boundary ◽  
Eddy Simulation ◽  
Reduction Effect

Superhydrophobic surface is a promising technology, but the effect of superhydrophobic surface on flow noise is still unclear. Therefore, we used alternating free-slip and no-slip boundary conditions to study the flow noise of superhydrophobic channel flows with streamwise strips. The numerical calculations of the flow and the sound field have been carried out by the methods of large eddy simulation (LES) and Lighthill analogy, respectively. Under a constant pressure gradient (CPG) condition, the average Reynolds number and the friction Reynolds number are approximately set to 4200 and 180, respectively. The influence on noise of different gas fractions (GF) and strip number in a spanwise period on channel flow have been studied. Our results show that the superhydrophobic surface has noise reduction effect in some cases. Under CPG conditions, the increase in GF increases the bulk velocity and weakens the noise reduction effect. Otherwise, the increase in strip number enhances the lateral energy exchange of the superhydrophobic surface, and results in more transverse vortices and attenuates the noise reduction effect. In our results, the best noise reduction effect is obtained as 10.7 dB under the scenario of the strip number is 4 and GF is 0.5. The best drag reduction effect is 32%, and the result is obtained under the scenario of GF is 0.8 and strip number is 1. In summary, the choice of GF and the number of strips is comprehensively considered to guarantee the performance of drag reduction and noise reduction in this work.

scholarly journals Fabrication of superhydrophobic surface by oxidation growth of flower-like nanostructure on a steel foil

RSC Advances ◽  
2017 ◽  
Vol 7 (41) ◽  
pp. 25341-25346 ◽  
Author(s):  
Rui Weng ◽  
Haifeng Zhang ◽  
Liang Yin ◽  
Wanting Rong ◽  
Zhiwen Wu ◽  
...  
Keyword(s):  
Drag Reduction ◽  
Superhydrophobic Surface ◽  
Novel Method ◽  
Reduction Effect ◽  
Oxidation Growth

A novel method to fabricate the superhydrophobic surface with a 3D flower-like micro-nanostructure on the steel foil was presented here. The surface shows good drag reduction effect and has numerous technical applications in drag reduction field.

Research on acoustic behaviors of water pipelines with guide vanes

2022 ◽  
pp. 107754632110623
Author(s):  
Xianzhong Wang ◽  
Ning Li ◽  
Min Yu ◽  
Hongzhou Lin ◽  
Lili Ye
Keyword(s):  
Noise Reduction ◽  
Guide Vane ◽  
Experimental Methods ◽  
Guide Vanes ◽  
Experimental Platform ◽  
Flow Noise ◽  
Water Pipelines ◽  
Flow Speeds ◽  
Radiation Noise ◽  
Reduction Effect

In this paper, the pipeline with guide vanes was taken as the research object, the flow noise was studied based on the hybrid calculation method, then the acoustic-structure coupling method was introduced to study the vibration and radiation noise, and then explored the best position of the guide vanes. Based on the pipeline experimental platform and improved experimental methods, it was found that the guide vanes had a better noise reduction effect on the elbows; based on that, a simulation study was carried out on the elbow with guide vanes, and the mechanism of the guide vanes on the velocity field and pulsating pressure of the pipeline was explored. Finally, the noise reduction effect at different positions of the guide vanes under different flow speeds was studied. The results indicated that the guide vane at the middle of the elbow had the best effect on improving the flow field and reducing noise in the working conditions studied in this article, providing a calculation basis for the design of the guide vane.

The Germano Large Eddy Simulation Model Used for the Simulation of Separated Flow

2003 ◽  
Author(s):  
Engin Cetindogan ◽  
Govert de With ◽  
Arne E. Holdo̸
Keyword(s):  
Reynolds Number ◽  
Large Eddy Simulation ◽  
Computational Study ◽  
Separated Flow ◽  
Local Flow ◽  
Large Eddy Simulation Model ◽  
Slip Boundary ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Les Model

A computational study of unsteady, separated fluid flow was made using the Large Eddy Simulation (LES). As flow problem the turbulent flow past a circular cylinder at a Reynolds number of Re = 3900 was chosen. The objective of this work was to study the numerical and modelling aspects of the dynamic Germano-LES turbulence model. Before LES can be used for applications of practical relevance, such as the flow around a complete aircraft or automobile, extensive tests must be carried out on simpler configurations to understand the quality of LES. Also, the influence of different grid resolutions was examined. Due to the fact of a low Reynolds number, no-slip boundary conditions were used at solid walls. Two different subgrid scale models were applied. In recent years several simulations were carried out using the Smagorinsky-LES model but there is still a lack of experience using the dynamic Germano-LES model, which takes the local flow parameters into account. Several simulations with different parameters and grid-models were carried out both with the Germano-LES model and the Smagorinsky-LES model. Comparisons were made between these two models as well as with several experimental data taken from literature.

Sign in / Sign up

Export Citation Format

Share Document