scholarly journals Assessment of Energy Arbitrage Using Energy Storage Systems: A Wind Park’s Perspective

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4718
Author(s):  
Pavani Ponnaganti ◽  
Birgitte Bak-Jensen ◽  
Brian Vejrum Wæhrens ◽  
Jesper Asmussen
Keyword(s):  
Energy Storage ◽  
Electricity Markets ◽  
Reactive Power ◽  
Storage Systems ◽  
Storage System ◽  
Energy Storage System ◽  
Green Energy ◽  
Battery Energy Storage System ◽  
Wind Park ◽  
Battery Energy

With the growing application of green energy, the importance of effectively handling the volatile nature of these energy sources is also growing in order to ensure economic and operational viability. Accordingly, the main contribution of this work is to evaluate the revenue potential for wind parks with integrated storage systems in the day-ahead electricity markets using genetic algorithm. It is achieved by the concept of flexible charging–discharging of the Energy Storage System (ESS), taking advantage of the widespread electricity prices that are predicted using a feedforward-neural-network-based forecasting algorithm. In addition, the reactive power restrictions posed by grid code that are to be followed by the wind park are also considered as one of the constraints. Moreover, the profit obtained with a Battery Energy Storage System (BESS) is compared with that of a Thermal Energy Storage System (TESS). The proposed method gave more profitable results when utilizing BESS for energy arbitrage in day-ahead electricity markets than with TESS. Moreover, the availability of ESS at wind park has reduced the wind power curtailment.

Three-Phase Grid Connected Bi-Directional Charging System to Control Active and Reactive Power with Harmonic Compensation

2019 ◽  
Vol 20 (2) ◽  
Author(s):  
Maheswar Prasad Behera ◽  
Pravat Kumar Ray
Keyword(s):  
Energy Storage ◽  
Reactive Power ◽  
Storage System ◽  
Energy Storage System ◽  
Control Technique ◽  
Battery Energy Storage System ◽  
Harmonic Compensation ◽  
Battery Energy Storage ◽  
Three Phase ◽  
Battery Energy

Abstract The feasibility of integration of Battery Energy Storage System (BESS) with a three-phase AC grid is being investigated in this paper. A converter is an inevitable part of a modern DC generating system. The link between the grid and the BESS is established through a Voltage Source Converter (VSC). Therefore, the converter can be utilized to dispatch the DC generated power to the connected AC grid and at the same time provides reactive power compensation and load harmonic compensation throughout the day. The DC bus voltage control of the converter system is carried out to keep the power factor always at unity, irrespective of the charging state of the battery source. The charging and discharging of the connected battery energy storage system are carried out through a bidirectional DC-DC converter. Adaptive hysteresis band current control (AHCC) scheme is employed to produce the switching signals. Finally, its performance is compared with the traditional hysteresis band control technique.

Low Voltage Ride-through for Doubly Fed Induction Generator Using Battery-Storage System

2016 ◽  
Vol 7 (2) ◽  
pp. 481
Author(s):  
D.V.N. Ananth ◽  
G.V. Nagesh Kumar
Keyword(s):  
Energy Storage ◽  
Reactive Power ◽  
Low Voltage ◽  
Storage System ◽  
Energy Storage System ◽  
Control Technique ◽  
Voltage Profile ◽  
Battery Energy Storage System ◽  
Battery Energy Storage ◽  
Battery Energy

In this paper, enhanced field oriented control technique (EFOC) was adopted in Rotor Side Control (RSC) of DFIG converter for improved response during severe faults. The work is intended to damp pulsations in electromagnetic torque, improve voltage mitigation and limit surge currents and to enhance the operation of DFIG during voltage sags. The converter topology uses a battery energy storage system with capacitor storage system to further enhance operation of DFIG during faults. The battery and capacitor system in coordination provide additional real and reactive power support during faults and nearly constant voltage profile at stator and rotor terminals and limit overcurrents. For EFOC technique, rotor flux reference changes its value from synchronous speed to zero during fault for injecting current at the rotor slip frequency. In this process DC-Offset component of flux is controlled, decomposition during overvoltage faults. The offset decomposition of flux will be oscillatory in a conventional FOC, whereas in EFOC it will damp quickly. A comparison is made with proposed methodology with battery energy storage system and a conventional system. Later the system performance with under voltage of 50% the rated voltage with fault at PCC during 0.8 to 1.2 seconds is analysed using simulation studies.

scholarly journals An Adaptable Engineering Support Framework for Multi-Functional Energy Storage System Applications

2018 ◽  
Vol 10 (11) ◽  
pp. 4164 ◽  
Author(s):  
Claudia Zanabria ◽  
Filip Andrén ◽  
Thomas Strasser
Keyword(s):  
Energy Storage ◽  
Development Process ◽  
Storage Systems ◽  
Storage System ◽  
Energy Storage System ◽  
Battery Energy Storage System ◽  
Battery Energy Storage ◽  
Engineering Approach ◽  
Expert User ◽  
Battery Energy

A significant integration of energy storage systems is taking place to offer flexibility to electrical networks and to mitigate side effects of a high penetration of distributed energy resources. To accommodate this, new processes are needed for the design, implementation, and proof-of-concept of emerging storage systems services, such as voltage and frequency regulation, and reduction of energy costs, among others. Nowadays, modern approaches are getting popular to support engineers during the design and development process of such multi-functional energy storage systems. Nevertheless, these approaches still lack flexibility needed to accommodate changing practices and requirements from control engineers and along the development process. With that in mind, this paper shows how a modern development approach for rapid prototyping of multi-functional battery energy storage system applications can be extended to provide this needed flexibility. For this, an expert user is introduced, which has the sole purpose of adapting the existing engineering approach to fulfill any new requirements from the control engineers. To achieve this, the expert user combines concepts from model-driven engineering and ontologies to reach an adaptable engineering support framework. As a result, new engineering requirements, such as new information sources and target platforms, can be automatically included into the engineering approach by the expert user, providing the control engineer with further support during the development process. The usefulness of the proposed solution is shown with a selected use case related to the implementation of an application for a battery energy storage system. It demonstrates how the expert user can fully adapt an existing engineering approach to the control engineer’s needs and thus increase the effectiveness of the whole engineering process.

Sign in / Sign up

Export Citation Format

Share Document