scholarly journals A Remote Monitoring System of Logistics Carrier Based on Wireless Sensor Network

2018 ◽  
Vol 14 (01) ◽  
pp. 4
Author(s):  
Wang Weidong

To improve the efficiency of the remote monitoring system for logistics transportation, we proposed a remote monitoring system based on wireless sensor network and GPRS communication. The system can collect information from the wireless sensor network and transmit the information to the ZigBee interpreter. The monitoring system mainly includes the following parts: Car terminal, GPRS transmission network and monitoring center. Car terminal mainly consists by the Zigbee microcontroller and peripherals, wireless sensor nodes, RFID reader, GPRS wireless communication module composed of a micro-wireless monitoring network. The information collected by the sensor communicates through the GPRS and the monitoring center on the network coordinator, sends the collected information to the monitoring center, and the monitoring center realizes the information of the logistics vehicle in real time. The system has high applicability, meets the design requirements in the real-time acquisition and information transmission of the information of the logistics transport vehicles and goods, and realizes the function of remote monitoring.

Due to the recent advancements in the fields of Micro Electromechanical Sensors (MEMS), communication, and operating systems, wireless remote monitoring methods became easy to build and low cost option compared to the conventional methods such as wired cameras and vehicle patrols. Pipeline Monitoring Systems (PMS) benefit the most of such wireless remote monitoring since each pipeline would span for long distances up to hundreds of kilometers. However, precise monitoring requires moving large amounts of data between sensor nodes and base station for processing which require high bandwidth communication protocol. To overcome this problem, In-Situ processing can be practiced by processing the collected data locally at each node instead of the base station. This Paper presents the design and implementation of In-situ pipeline monitoring system for locating damaging activities based on wireless sensor network. The system built upon a WSN of several nodes. Each node contains high computational 1.2GHz Quad-Core ARM Cortex-A53 (64Bit) processor for In-Situ data processing and equipped in 3-axis accelerometer. The proposed system was tested on pipelines in Al-Mussaib gas turbine power plant. During test knocking events are applied at several distances relative to the nodes locations. Data collected at each node are filtered and processed locally in real time in each two adjacent nodes. The results of the estimation is then sent to the supervisor at base-station for display. The results show the proposed system ability to estimate the location of knocking event.


2012 ◽  
Vol 198-199 ◽  
pp. 1302-1305
Author(s):  
Bing Shi ◽  
Zheng Hua Ma ◽  
Jian Ming Jiang

For improving monitoring the sewage in pipeline, and improving the accuracy of the transmission in network, the remote monitoring system based on wireless sensor network and GPRS is designed. The test show that communications among the system are realized reliably and the requirements are met respectively. The application of the system can well meet the demands of remote monitoring system for sewage in pipeline.


2017 ◽  
Vol 13 (05) ◽  
pp. 146
Author(s):  
Chunmei Li ◽  
Bin Li ◽  
Guohong Shi

<p class="0abstract">A wireless remote sensing system based on wireless sensor network solution is proposed, to achieve the remote control of home appliances. The remote control system uses STM32F103 chip as the main controller of the smart home system, and applies the CC1110 radio frequency module as the communication node of the home wireless sensor network. Through the Simplici TI network protocol, these nodes together are put forward to form a small home LAN. Then, combining with GPRS wireless communication technology and Web Internet technology, these nodes to the remote server are collected. The results showed that through the user's mobile terminal access, it can form a wireless remote monitoring system. The conclusion is drawn that an intelligent home remote monitoring system based on wireless sensor network is feasible and it has good performances.</p>


Sign in / Sign up

Export Citation Format

Share Document