Hydraulic Fracture Optimization Model to Maximize Tight Gas Recovery

The increasing global demand for energy along with the reduction in conventional gas reserves has lead to the increasing demand and exploration of unconventional gas sources. Hydraulically-fractured tight gas reservoirs are one of the most common unconventional sources being produced today and look to be a regular source of gas in the future. Hydraulic fracture orientation and spacing are important factors in effective field drainage and gas recovery. This paper presents a 3D single well hydraulically fractured tight gas model created using commercial simulation software, which will be used to simulate gas production and synthetically generate welltest data. The hydraulic fractures will be simulated with varying sizes and different numbers of fractures intersecting the wellbore. The focus of the simulation runs will be on the effect of hydraulic fracture size and spacing on well productivity performance. The results obtained from the welltest simulations will be plotted and used to understand the impact on reservoir response under the different hydraulic fracturing scenarios. The outputs of the models can also be used to relate welltest response to the efficiency of hydraulic fractures and, therefore, productivity performance.

Download Full-text

Impact of the Cluster Spacing on Hydraulic Fracture Conductivity and Productivity of a Marcellus Shale Horizontal Well

10.2118/201794-ms ◽

2021 ◽

Author(s):

Mohamed El Sgher ◽

Kashy Aminian ◽

Ameri Samuel

Keyword(s):

Hydraulic Fracture ◽

Marcellus Shale ◽

Technical Information ◽

Gas Production ◽

Production Performance ◽

Valuable Insight ◽

Fracture Conductivity ◽

Fracture Properties ◽

Gas Recovery ◽

The Impact

Abstract The objective of this study was to investigate the impact of the hydraulic fracturing treatment design, including cluster spacing and fracturing fluid volume on the hydraulic fracture properties and consequently, the productivity of a horizontal Marcellus Shale well with multi-stage fractures. The availability of a significant amount of advanced technical information from the Marcellus Shale Energy and Environment Laboratory (MSEEL) provided an opportunity to perform an integrated analysis to gain valuable insight into optimizing fracturing treatment and the gas recovery from Marcellus shale. The available technical information from a horizontal well at MSEEL includes well logs, image logs (both vertical and lateral), diagnostic fracture injection test (DFIT), fracturing treatment data, microseismic recording during the fracturing treatment, production logging data, and production data. The analysis of core data, image logs, and DFIT provided the necessary data for accurate prediction of the hydraulic fracture properties and confirmed the presence and distribution of natural fractures (fissures) in the formation. Furthermore, the results of the microseismic interpretation were utilized to adjust the stress conditions in the adjacent layers. The predicted hydraulic fracture properties were then imported into a reservoir simulation model, developed based on the Marcellus Shale properties, to predict the production performance of the well. Marcellus Shale properties, including porosity, permeability, adsorption characteristics, were obtained from the measurements on the core plugs and the well log data. The Quanta Geo borehole image log from the lateral section of the well was utilized to estimate the fissure distribution s in the shale. The measured and published data were utilized to develop the geomechnical factors to account for the hydraulic fracture conductivity and the formation (matrix and fissure) permeability impairments caused by the reservoir pressure depletion during the production. Stress shadowing and the geomechanical factors were found to play major roles in production performance. Their inclusion in the reservoir model provided a close agreement with the actual production performance of the well. The impact of stress shadowing is significant for Marcellus shale because of the low in-situ stress contrast between the pay zone and the adjacent zones. Stress shadowing appears to have a significant impact on hydraulic fracture properties and as result on the production during the early stages. The geomechanical factors, caused by the net stress changes have a more significant impact on the production during later stages. The cumulative gas production was found to increase as the cluster spacing was decreased (larger number of clusters). At the same time, the stress shadowing caused by the closer cluster spacing resulted in a lower fracture conductivity which in turn diminished the increase in gas production. However, the total fracture volume has more of an impact than the fracture conductivity on gas recovery. The analysis provided valuable insight for optimizing the cluster spacing and the gas recovery from Marcellus shale.

Download Full-text

No Need for Radio Active Tracer When Mother Nature Helps Detecting the Effective Hydraulic Fracture Height

10.2118/205296-ms ◽

2022 ◽

Author(s):

Rinat Lukmanov ◽

Said Jabri ◽

Ehab Ibrahim

Keyword(s):

Hydraulic Fracture ◽

Natural Radioactivity ◽

Gamma Ray ◽

Fracture Propagation ◽

Radioactive Isotopes ◽

Main Element ◽

Tight Gas ◽

Well Test ◽

Gas Reservoirs ◽

Fracture Height

Abstract The tight gas reservoirs of Haima Supergroup provide the majority of gas production in the Sultanate of Oman. The paper discusses a possibility of using the anomalies from natural radioactivity to evaluate the fracture height for complex tight gas in mature fields of Oman. The standard industry practice is adding radioactive isotopes to the proppant. Spectral Gamma Ray log is used to determine near wellbore traced proppant placement. Spectral Noise log in combination with Production logs helps to identify the active fractures contributing to production. These methods complement each other, but they are obviously associated with costs. Hence, majority of wells are fracced without tracers or any other fracture height diagnostics. However, in several brown fields, an alternative approach to identify fracture height has been developed which provides fit-for-purpose results. It is based on the analysis of naturally occurring radioactive minerals (NORM) precipitation. The anomalies were observed in the many gas reservoirs even in cases when tracers were not used. At certain conditions, these anomalies can be used to characterize fracture propagation and optimize future wells hydraulic Fracture design. A high number of PLTs and well test information were analyzed. Since tight formations normally don't produce without fracturing, radioactive anomalies flag the contributing intervals and hence fracture propagation. The main element of analysis procedure is related to that fact that if no tracers applied, the discrepancy between normalized Open Hole Gamma Ray and Gamma Ray taken during PLT after 6-12 months of production can be used instead to establish fracture height. This method cannot be applied for immediate interpretation of fracture propagation because time is required to precipitate NORM and using the anomalies concept. The advantage of this method is that it can be used in some fields to estimate the frac effectiveness of wells without artificial tracers. It is normally assumed that the Natural radioactivity anomalies appear mainly due to co-production of the formation water. However, in the fields of interest the anomalies appear in wells producing only gas and condensate. This observation provides an opportunity for active fracture height determination at minimum cost.

Download Full-text

A New Approach for Reliable Estimation of Hydraulic Fracture Properties Using Elliptical Flow Data in Tight Gas Wells

SPE Reservoir Evaluation & Engineering ◽

10.2118/105767-pa ◽

2009 ◽

Vol 12 (02) ◽

pp. 254-262 ◽

Cited By ~ 19

Author(s):

Yueming Cheng ◽

W. John Lee ◽

Duane A. McVay

Keyword(s):

Hydraulic Fracture ◽

Finite Conductivity ◽

Tight Gas ◽

Well Test ◽

Pressure Data ◽

Gas Wells ◽

New Approach ◽

Fracture Properties ◽

Elliptical Flow ◽

Half Length

Summary Gas wells in low-permeability formations usually require hydraulic fracturing to be commercially viable. Pressure transient analysis in hydraulically fractured tight gas wells is commonly based on analysis of three flow regimes: bilinear, linear, and pseudoradial. Without the presence of pseudoradial flow, neither reservoir permeability nor fracture half-length can be independently estimated. In practice, as pseudoradial flow is often absent, the resulting estimation is uncertain and unreliable. On the other hand, elliptical flow, which exists between linear flow and pseudoradial flow, is of long duration (typically months to years). We can acquire much rate and pressure data during this flow regime, but no practical well test analysis technique is currently available to interpret these data. This paper presents a new approach to reliably estimate reservoir and hydraulic fracture properties from analysis of pressure data obtained during the elliptical flow period. The method is applicable to estimate fracture half-length, formation permeability, and skin factor independently for both infinite- and finite-conductivity fractures. It is iterative and features rapid convergence. The method can estimate formation permeability when pseudoradial flow does not exist. Coupled with stable deconvolution technology, which converts variable production-rate and pressure measurements into an equivalent constant-rate pressure drawdown test, this method can provide fracture-property estimates from readily available, noisy production data. We present synthetic and field examples to illustrate the procedures and demonstrate the validity and applicability of the proposed approach.

Download Full-text