The Analysis of a Simplified 2R Pseudo-Rigid-Body Model with Moment Load

2012 ◽  
Vol 224 ◽  
pp. 18-23
Author(s):  
Yun Jiao Zhang ◽  
Guo Wu Wei ◽  
Jian Sheng Dai
Keyword(s):  
Rigid Body ◽  
Objective Function ◽  
Compliant Mechanisms ◽  
Three Dimensional ◽  
Body Model ◽  
Design Variables ◽  
Characteristic Radius ◽  
Rigid Body Model ◽  
Analysis And Synthesis ◽  
Moment Load

Pseudo-rigid-body model (PRBM) method, which simplifies the geometrical nonlinear analysis, has become an important tool for the analysis and synthesis of compliant mechanisms. In this paper, a simplified 2R PRBM with two rigid links and two torsion springs is proposed. The characteristic radius factor and stiffness coefficients are selected as the design variables; in order to be better to simulate the tip point and tip slope, a three-dimensional objective function is formulated to optimize the new pseudo-rigid-body model. It is revealed in this paper that the precision of the tip point simulation can be improved when the coefficient of the tip slope error in the objective function is reduced.

A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments

1998 ◽  
Vol 120 (3) ◽  
pp. 392-400 ◽  
Author(s):  
A. Saxena ◽  
S. N. Kramer
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Elliptic Integral ◽  
Beam Equation ◽  
Large Deflections ◽  
Euler Beam ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads. Because of this fact, traditional methods of deflection analysis do not apply. Since the nonlinearities introduced by these large deflections make the system comprising such members difficult to solve, parametric deflection approximations are deemed helpful in the analysis and synthesis of compliant mechanisms. This is accomplished by representing the compliant mechanism as a pseudo-rigid-body model. A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms. In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads. A numerical integration technique using quadrature formulae has been employed to solve the large deflection Bernoulli-Euler beam equation for the tip deflection. Implementation of this scheme is simpler than the elliptic integral formulation and provides very accurate results. An example for the synthesis of a compliant mechanism using the proposed model is also presented.

A Simple and Accurate Method for Determining Large Deflections in Complaint Mechanisms Subjected to End Forces and Moments

1998 ◽  
Author(s):  
A. Saxena ◽  
Steven N. Kramer
Keyword(s):  
Rigid Body ◽  
Numerical Integration ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Beam Equation ◽  
Integration Scheme ◽  
Large Deflections ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads for which, traditional methods of deflection analysis do not apply Nonlinearities introduced by these large deflections make the system comprising such members difficult to solve Parametric deflection approximations are then deemed helpful in the analysis and synthesis of compliant mechanisms This is accomplished by seeking the pseudo-rigid-body model representation of the compliant mechanism A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads with positive end moments A numerical integration technique using quadrature formulae has been employed to solve the nonlinear Bernoulli-Euler beam equation for the tip deflection Implementation of this scheme is relatively simpler than the elliptic integral formulation and provides nearly accurate results Results of the numerical integration scheme are compared with the beam finite element analysis An example for the synthesis of a compliant mechanism using the proposed model is also presented.

Multiple-Segment-Pseudo-Rigid-Body Model Concept in Compliant Mechanism Design and Analysis

2000 ◽  
Author(s):  
Gregory A. Mettlach ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Synthesis Methods ◽  
Model Concept ◽  
Displacement Boundary ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis ◽  
Beam Type

Abstract The concept of a pseudo-rigid-body model for a flexible member proven very instrumental in the design and analysis of compliant mechanisms. It provides a means by which a compliant mechanism may be modeled as an equivalent pseudo-rigid-body mechanism. This makes it possible for compliant mechanisms to be analyzed and designed using a wealth of existing methods for rigid-body mechanisms. Oftentimes, however, it is not possible to model a compliant member with a typical pseudo-rigid-body model. This may be due to a force or displacement boundary condition applied to a compliant member at a point other than the beam end. For situations such as these, a planar, multiple-segment pseudo-rigid-body model concept is introduced which allows arbitrary beam type compliant members, regardless of geometry, loading, or boundary conditions, to be modeled as an assemblage of rigid members with torsional springs at characteristic pivots. This methodology enables existing analysis and synthesis methods to be applied in the design of complex compliant mechanisms.

A Generalized Loop-Closure Theory for the Analysis and Synthesis of Compliant Mechanisms

1994 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Energy Storage ◽  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Mechanism Analysis ◽  
Model Concept ◽  
Loop Closure ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant mechanisms gain at least some of their motion from flexible members. The combination of large-deflection beam analysis, kinematic motion analysis, and energy storage makes the analysis of compliant mechanisms difficult. The design of mechanisms often requires iteration between synthesis and analysis procedures. In general, the difficulty in analysis has limited the use of compliant mechanisms to applications where only simple functions and motions are required. The pseudo-rigid-body model concept promises to be the key to unifying the compliant and rigid-body mechanism theories. It simplifies compliant mechanism analysis by determining an equivalent rigid-body mechanism that accurately models the kinematic characteristics of a compliant mechanism. Once this model is obtained, many well known concepts from rigid-body mechanism theory become amenable for use to analyze and design compliant mechanisms. The pseudo-rigid-body-model concept is used to develop a generalized loop-closure method for the analysis and synthesis of compliant mechanisms. Synthesis is divided into two major categories: (i) rigid-body replacement synthesis, wherein only kinematic constraints are considered, and (ii) synthesis for compliance, wherein considerations of the energy storage and input/output force/torque characteristics of compliant mechanisms are utilized. The method allows compliant mechanisms to be designed for tasks that would have earlier been assumed to be unlikely, if not impossible, applications of compliant mechanisms. Examples of function, motion, and path generation of compliant mechanisms are presented for the first time.

scholarly journals Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms

2001 ◽  
Author(s):  
Christopher A. Mattson ◽  
Larry L. Howell ◽  
Spencer P. Magleby
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Research Community ◽  
Parallel Mechanisms ◽  
Model Case ◽  
Body Model ◽  
Parallel Motion ◽  
Rigid Body Model ◽  
Analysis And Synthesis ◽  
The Subject

Abstract Analysis and synthesis of compliant mechanisms has recently been the subject of significant study in the research community. This focus has led to a number of design approaches for developing compliant mechanisms. This paper describes the value of using the Pseudo-Rigid-Body Model (PRBM) to design compliant mechanisms for commercial products. Application of the PRBM is illustrated through the development of two parallel mechanisms: a bicycle derailleur and parallel-motion bicycle brakes. The PRBM allows compliant mechanisms to be modeled and analyzed as rigid-body mechanisms and significantly reduces the complexity of analysis. Mechanisms with straightforward properties are used to demonstrate the use of the PRBM to design commercially viable compliant mechanisms for required motion and force-deflection characteristics.

Pseudo-Rigid-Body Model for the Flexural Beam With an Inflection Point in Compliant Mechanisms

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Shun-Kun Zhu ◽  
Yue-Qing Yu
Keyword(s):  
Rigid Body ◽  
Inflection Point ◽  
Compliant Mechanisms ◽  
Angular Displacement ◽  
Flexible Beam ◽  
Body Model ◽  
Numerical Result ◽  
Characteristic Radius ◽  
Rigid Body Model ◽  
Flexural Beam

The pseudo-rigid-body model (PRBM) used to simulate compliant beams without inflection point had been well developed. In this paper, two types of PRBMs are proposed to simulate the large deflection of flexible beam with an inflection point in different configurations. These models are composed of five rigid links connected by three joints added with torsional springs and one hinge without spring representing the inflection point in the flexural beam. The characteristic radius factors of the PRBMs are determined by solving the objective function established according to the relative angular displacement of the two rigid links jointed by the hinge via genetic algorithm. The spring stiffness coefficients are obtained using a linear regression technique. The effective ranges of these two models are determined by the load index. The numerical result shows that both the tip locus and inflection point of the flexural beam with single inflection can be precisely simulated using the model proposed in this paper.

Using Burmester Theory in the Design of Compliant Mechanisms

1996 ◽  
Author(s):  
Gregory A. Mettlach ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Graphical Representation ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Iterative Solution ◽  
Design Problems ◽  
Linear Set ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant mechanisms have been defined as mechanical systems that derive some or all of their mobility from the flexibility of one or more of their members. In general, due to the large-deflection nature of the compliant members, analysis and synthesis of compliant mechanisms have typically required a numerical iterative solution method. Recently, analytical loop-closure synthesis techniques have been extended to the design of compliant mechanisms, by utilizing the concept of an equivalent pseudo-rigid-body model for a compliant mechanism. These developments have greatly simplified the synthesis of compliant mechanisms. These mechanisms have been synthesized for three precision points using analytical and graphical methods. In rigid-link mechanism design, additional precision points may be incorporated by using Burmester theory. With this enhancement as the motivation, this paper presents the first use of Burmester theory to design compliant mechanisms for four and five precision points. This is facilitated by use of the concept of an equivalent pseudo-rigid-body model. Burmester theory yields a linear set of kinematic equations, allowing for their easy utilization herein. Also for some design problems, this theory can provide a graphical representation of all possible solutions for compliant mechanisms. In addition to the specification of precision points for compliant mechanisms, input torque and/or potential energy values may also be prescribed.

A Loop-Closure Theory for the Analysis and Synthesis of Compliant Mechanisms

1996 ◽  
Vol 118 (1) ◽  
pp. 121-125 ◽  
Author(s):  
L. L. Howell ◽  
A. Midha
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Mechanism Analysis ◽  
Model Concept ◽  
Loop Closure ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis ◽  
Kinematic Motion Analysis

Compliant mechanisms gain at least some of their motion from flexible members. The combination of large-deflection beam analysis, kinematic motion analysis, and energy storage makes the analysis of compliant mechanisms difficult. The design of mechanisms often requires iteration between synthesis and analysis procedures. In general, the difficulty in analysis has limited the use of compliant mechanisms to applications where only simple functions and motions are required. The pseudo-rigid-body model concept promises to be the key to unifying the compliant and rigid-body mechanism theories. It simplifies compliant mechanism analysis by determining an equivalent rigid-body mechanism that accurately models the kinematic characteristics of a compliant mechanism. Once this model is obtained, many well known concepts from rigid-body mechanism theory become amenable for use to analyze and design compliant mechanisms. The pseudo-rigid-body-model concept is used to develop a loop-closure method for the analysis and synthesis of compliant mechanisms. The method allows compliant mechanisms to be designed for tasks that would have earlier been assumed to be unlikely, if not impossible, applications of compliant mechanisms.

A Pseudo-Rigid-Body Model Approach for the Design of Compliant Mechanism Springs for Prescribed Force-Deflections

2011 ◽  
Author(s):  
Levi C. Leishman ◽  
Mark B. Colton
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Deflection Curve ◽  
Unique Challenge ◽  
Body Model ◽  
Design Variables ◽  
Rigid Body Model ◽  
Nonlinear Force ◽  
Target Force

Compliant mechanism springs offer a variety of benefits for applications where nonlinear force responses are desired. Designing a compliant mechanism spring with a prescribed force response is a unique challenge with many design variables. This paper introduces a method, based on the Pseudo-Rigid-Body Model (PRBM) for large beam deflections, to synthesize three- and four-link compliant mechanisms that exhibit prescribed force-deflection responses. The designer prescribes the target force-deflection curve, the number of links the spring is to have, and bounds for the spring’s link lengths and torsional spring constants. The method uses a genetic algorithm routine to search for promising designs and a direct search method to further refine the configuration to achieve the desired force-deflection curve. Experimental results illustrate the methods ability to generate springs whose force-deflection curves approximate the target curves. The results also suggest that inclusion of more complex configurations may lead to more accurate designs. It is shown how the method can be used to design springs that closely mimic the behavior of zero-free-length springs, and a discussion of how the method can be extended to design springs that behave similarly to pre-tensioned springs is presented.

Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-Rigid-Body Model of Large-Deflection Compliant Mechanisms

1994 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Spring Stiffness ◽  
Model Concept ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Body Joints

Abstract Compliant mechanisms gain some or all of their mobility from the flexibility of their members rather than from rigid-body joints only. More efficient and usable analysis and design techniques are needed before the advantages of compliant mechanisms can be fully utilized. In an earlier work, a pseudo-rigid-body model concept, corresponding to an end-loaded geometrically nonlinear, large-deflection beam, was developed to help fulfill this need. In this paper, the pseudo-rigid-body equivalent spring stiffness is investigated and new modeling equations are proposed. The result is a simplified method of modeling the force/deflection relationships of large-deflection members in compliant mechanisms. Flexible segments which maintain a constant end angle are discussed, and an example mechanism is analyzed. The resulting models are valuable in the visualization of the motion of large-deflection systems, as well as the quick and efficient evaluation and optimization of compliant mechanism designs.

Sign in / Sign up

Export Citation Format

Share Document