A Research of Intra Prediction Coding with Variance of Prediction Mode Number

2015 ◽  
Vol 719-720 ◽  
pp. 1177-1183
Author(s):  
Wei Zheng ◽  
Long Ye ◽  
Jing Ling Wang ◽  
Qin Zhang

Intra prediction is a key step in H.264/AVC to improve the coding performance with the idea that removing the directional redundancy among neighboring blocks. In order to cover more directional information existed in the image frames, there are usually many prediction modes can be selected in the state-of-the-art coding frameworks, but more bits are also needed to encode the prediction mode index information, then how to achieve the maximum overall bit-rate reduction became a problem. In this paper, 16 kinds of prediction modes are adopted by considering the direction information for 8x8 image blocks. Through calculating the bit-rate both for the mode index and residual image under different number of prediction modes, we obtain the most suitable prediction mode number relatively from the graphs. Experimental results show that, with the increase of prediction mode number, the residual information decreases obviously, and the sum of residual information and prediction mode index information also decreases but levels off after reaching a certain mode number, even has an obviously rising trend.

2021 ◽  
Vol 13 (6) ◽  
pp. 0-0

Aiming at the problem that the data hiding algorithm of high efficiency video coding (HEVC) has great influence on the video bit rate and visual quality, an information hiding algorithm based on intra prediction mode and matrix coding is proposed. Firstly, 8 prediction modes are selected from 4×4 luminance blocks in I frame to embed the hidden information. Then, the Least Significant Bit (LSB) algorithm is used to modulate the LSB of the last prediction mode. Finally, the modulated luminance block is re-encoded to embed 4 bits secret information. Experimental results show that the algorithm improves the embedding capacity, guarantees the subjective and objective quality of the video, and the bit rate increases by 1.14% on average.


2021 ◽  
Vol 13 (6) ◽  
pp. 1-15
Author(s):  
Yong Liu ◽  
Dawen Xu

Aiming at the problem that the data hiding algorithm of high efficiency video coding (HEVC) has great influence on the video bit rate and visual quality, an information hiding algorithm based on intra prediction mode and matrix coding is proposed. Firstly, 8 prediction modes are selected from 4×4 luminance blocks in I frame to embed the hidden information. Then, the Least Significant Bit (LSB) algorithm is used to modulate the LSB of the last prediction mode. Finally, the modulated luminance block is re-encoded to embed 4 bits secret information. Experimental results show that the algorithm improves the embedding capacity, guarantees the subjective and objective quality of the video, and the bit rate increases by 1.14% on average.


2014 ◽  
Vol E97.B (9) ◽  
pp. 1990-1999
Author(s):  
Kibaek KIM ◽  
Gwanggil JEON ◽  
Jechang JEONG

2019 ◽  
Vol 31 (1) ◽  
pp. 158
Author(s):  
Xiuzhi Yang ◽  
Min Zhao ◽  
Longzhao Shi ◽  
Zhifeng Chen ◽  
Mingkui Zheng

2018 ◽  
Vol 17 (1) ◽  
pp. 39
Author(s):  
Milan Dinčić ◽  
Dragan Denić ◽  
Zoran Perić

The aim of this paper is to design, analyze and compare four different systems for ADC (analog-to-digital conversion) of vibration signals. Measurement of vibration signals is of particular importance in many areas, such as predictive maintenance or structural health monitoring. Wireless systems for vibration measurements becomes very topical, due to much easier and cheaper installation compared to wired systems. Due to the lack of transmission bandwidth and energy in wireless measurement systems, the amount of digital data being sent has to be reduced; hence, we have to apply ADC systems that can achieve the required digital signal quality, reducing the bit-rate. Four ADC systems are analyzed, for possible application in wireless measurement systems: PCM (pulse code modulation) based on uniform quantization; DPCM (differential PCM) to exploit high correlation of vibration signals; two adaptive ADC systems to cope with significant variations of characteristics of vibration signals in time - APCM (adaptive PCM) with adaptation on variance and ADPCM (adaptive DPCM), with double adaptation (both on variance and correlation). These ADC models are designed and optimized specifically for vibration signals, based on the analysis of 20 vibration signals from a referent database. An experiment is done, applying designed ADC systems for digitalization of vibration signals. APCM, DPCM and ADPCM systems allow significant bit-rate reduction compared to the PCM system, but with the increasing of complexity, hence the compromise between the bit-rate reduction and complexity is needed.


Sign in / Sign up

Export Citation Format

Share Document