Study on Fault Diagnosis of Power Transformer with Reduction Method of Attribute Significance

2014 ◽  
Vol 1049-1050 ◽  
pp. 665-668
Author(s):  
Hong Li Lv
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Rough Sets ◽  
Power Transformer ◽  
Reduction Algorithm ◽  
Rough Sets Theory ◽  
Fault Diagnosis System ◽  
Transformer Fault ◽  
Sets Theory ◽  
Quality Diagnosis

This paper studies the power transformer fault quality diagnosis using rough sets theory and neural network. It is rough sets reduction as the pre-unit of neural network based on reduction algorithm with the attribute significance. The paper describes the reduction algorithm and implementation method detailed. Through the training and testing results with practical data, it is proved that the reduction algorithm with the attribute significance can make the number of input samples shorter, the training speed faster and the diagnostic accuracy higher. The algorithm is feasible and effective for applying to the fault diagnosis system of power transformer.

Research on Extracting Vehicle Fault Symptoms Based on Rough Sets Theory in Mechanical Engineering

2013 ◽  
Vol 644 ◽  
pp. 110-114
Author(s):  
Chang Shun Wang
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Diesel Engine ◽  
Network Theory ◽  
Rough Sets ◽  
Fuzzy Theory ◽  
Rough Sets Theory ◽  
Combined Application ◽  
Neural Network Theory ◽  
Sets Theory

This paper gives a brief introduction of rough sets theory. Taking the fault diagnosis of the diesel engine valve clearance for example, it discusses about the basic algorithms and methods to extract fault symptoms based on rough sets theory. The conclusion shows the possibility to develop intelligent fault diagnosis with the combined application of fuzzy theory and neural network theory.

Improved PSO-BP neural network for power transformer fault diagnosis

2010 ◽  
Vol 30 (3) ◽  
pp. 783-785 ◽  
Author(s):  
Zhong-yang XIONG ◽  
Qing-bo YANG ◽  
Yu-fang ZHANG
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Bp Neural Network ◽  
Power Transformer ◽  
Transformer Fault ◽  
Improved Pso

scholarly journals Power transformer fault diagnosis system based on Internet of Things

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Guoshi Wang ◽  
Ying Liu ◽  
Xiaowen Chen ◽  
Qing Yan ◽  
Haibin Sui ◽  
...  
Keyword(s):  
Fault Diagnosis ◽  
Internet Of Things ◽  
Power Transformer ◽  
Fault System ◽  
Ratio Method ◽  
Diagnosis System ◽  
Network Training ◽  
Fault Diagnosis System ◽  
Training Error ◽  
Transformer Fault

Abstract Transformer is the most important equipment in the power system. The research and development of fault diagnosis technology for Internet of Things equipment can effectively detect the operation status of equipment and eliminate hidden faults in time, which is conducive to reducing the incidence of accidents and improving people's life safety index. Objective To explore the utility of Internet of Things in power transformer fault diagnosis system. Methods A total of 30 groups of transformer fault samples were selected, and 10 groups were randomly selected for network training, and the rest samples were used for testing. The matter-element extension mathematical model of power transformer fault diagnosis was established, and the correlation function was improved according to the characteristics of three ratio method. Each group of power transformer was diagnosed for four months continuously, and the monitoring data and diagnosis were recorded and analyzed result. GPRS communication network is used to complete the communication between data acquisition terminal and monitoring terminal. According to the parameters of the database, the working state of the equipment is set, and various sensors are controlled by the instrument driver module to complete the diagnosis of transformer fault system. Results The detection success rate of the power transformer fault diagnosis system model established in this paper is as high as 95.6%, the training error is less than 0.0001, and it can correctly identify the fault types of the non training samples. It can be seen that the technical support of the Internet of Things is helpful to the upgrading and maintenance of the power transformer fault diagnosis system.

Compound-Fault Diagnosis of Bearing Based on Order Tracking Wavelet Packet and Rough Sets

2011 ◽  
Vol 130-134 ◽  
pp. 1681-1685 ◽  
Author(s):  
Guang Tian ◽  
Hao Tian ◽  
Guang Sheng Liu ◽  
Jin Hui Zhao ◽  
Li Ping Luo
Keyword(s):  
Fault Diagnosis ◽  
Rough Sets ◽  
Wavelet Packet ◽  
Decision Rules ◽  
Vibration Signals ◽  
Rough Sets Theory ◽  
Equal Angle ◽  
Order Tracking ◽  
Start Up ◽  
Sets Theory

The diagnosis of compound-fault is always a difficult point, and there is not an effective method in equipment diagnosis field, then a new method of compound-fault diagnosis was presented. The vibration signals at start-up in the gearbox are non-stationary signals, and traditional ways of diagnosis have low precision. Order tracking and wavelet packet and rough sets theory are introduced in the compound-fault diagnosis of bearing. First, the vibration signals at start-up were resampled using computer order tracking arithmetic and equal angle distributed vibration signals were obtained, and wavelet packet has been used for equal angle distributed vibration signals decomposition and reconstruction. Then, energy distribution of every frequency band can be calculated according to normalization process. A new feature vector can be obtained, then clear and concise decision rules can be obtained by rough sets theory. Finally, the result of compound-fault example proves that the proposed method has high validity and more amplitude appliance foreground.

Fault diagnosis using Rough Sets Theory

2000 ◽  
Vol 43 (1) ◽  
pp. 61-72 ◽  
Author(s):  
Lixiang Shen ◽  
Francis E.H. Tay ◽  
Liangsheng Qu ◽  
Yudi Shen
Keyword(s):  
Fault Diagnosis ◽  
Rough Sets ◽  
Rough Sets Theory ◽  
Sets Theory
Sign in / Sign up

Export Citation Format

Share Document