Influence of Titanium Compounds on Melting and Crystalline Temperature of Mold Powder

2011 ◽  
Vol 284-286 ◽  
pp. 1111-1114
Author(s):  
Cai Jun Zhang ◽  
Dong Mei Tu ◽  
Min Hu
Keyword(s):  
Stainless Steel ◽  
Melting Temperature ◽  
Ferritic Stainless Steel ◽  
Crystallization Temperature ◽  
Mold Powder ◽  
Power Change ◽  
Tin Content ◽  
Titanium Compounds ◽  
Melting And Crystallization

Influence of TiN(0.5%~2.5%) and TiO2(1%~5%) on melting and crystalline temperature have been studied and analyzed in ferritic stainless steel containing titanium mold powder. The results show that with the increasing TiN content from 0.5% to 2.5%, the melting and crystallization temperature of mold power change between 1053~1082°C and 951~981°C respectively. With TiO2 content from 1% to 2%, the melting temperature is lower from 1066°C to 1047°C. As the content of TiO2 increasing to 5%, melting temperature increases obviously to 1077°C. TiO2 has less effect on the crystallization temperature of mold power.

Crystallization Behavior of Polypropylene/Syndiotactic1,2-Polybutadiene Blends

2012 ◽  
Vol 531-532 ◽  
pp. 182-185
Author(s):  
Xiao Feng He ◽  
Shuai Wang ◽  
Tie Jun Ge ◽  
Xue Quan Zhang ◽  
Chun Yu Zhang
Keyword(s):  
High Temperature ◽  
Melting Temperature ◽  
Crystallization Temperature ◽  
Crystallization Behavior ◽  
Strong Impact ◽  
Crystallization Behaviors ◽  
Supercooling Temperature ◽  
Melting And Crystallization

The melting and crystallization behaviors of Polypropylene/Syndiotactic1,2-polybutadiene (PP/s-PB) blends and neat PP were studied by using DSC, the results showed that the presence of s-PB in PP would have a strong impact on the crystallization capacity of PP. The presence of s-PB in PP could increase the crystallization temperature(Tc) of PP, and the s-PB could obviously lower supercooling temperature(Tm-Tc) of PP, but the s-PB in PP have a Slightly influence on the melting temperature(Tm) of PP. The proposed reason for those are that the crosslinking s-PB in high temperature is a nucleator for PP’s crystallization and increases PP’s crystalline rate. However, the s-PB lowers PP’s crystallinity. At the same time, the presence of PP in blends lowers s-PB’s crystallinity, but the PP in blends have a Slightly influence on the melting temperature(Tm) and crystallization temperature(Tc) of s-PB.

Microstructures and Hardness of CO2 Laser Welds in 409L Ferritic Stainless Steel

2010 ◽  
Vol 48 (04) ◽  
pp. 297-304 ◽  
Author(s):  
Jong Pan Kong ◽  
Tae Jun Park ◽  
Hye Sung Na ◽  
Jeong Kil Kim ◽  
Sang Ho Uhm ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Ferritic Stainless Steel ◽  
Co2 Laser ◽  
Laser Welds

Effect of the Heat Input on the Tensile Properties in Arc Brazing of Ferritic Stainless Steel using Cu-Si Insert Alloy

2010 ◽  
Vol 48 (04) ◽  
pp. 289-296 ◽  
Author(s):  
Myung-Bok Kim ◽  
Sang-Ju Kim ◽  
Bong-Keun Lee ◽  
Xinjian Yuan ◽  
Byoung-Hyun Yoon ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Heat Input

ATI 409HP

Alloy Digest ◽  
2013 ◽  
Vol 62 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Temperature Performance ◽  
End Use ◽  
Oxidation And Corrosion

Abstract ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI Allegheny Ludlum to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-1", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened the utility of ATI 409HP stainless steel. ATI 409HP consists of four grades: UNS S40900, S40910, S40920, and S40930. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-1135. Producer or source: Allegheny Technologies Inc..

SEA CURE

Alloy Digest ◽  
1979 ◽  
Vol 28 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
High Resistance ◽  
Brackish Water ◽  
Crevice Corrosion ◽  
Heat Treating

Abstract SEA-CURE is a ferritic stainless steel designed to provide high resistance to pitting and crevice corrosion in condensers cooled by saline or brackish water. It is used for condenser tubes and has great potential for many other uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-364. Producer or source: Trent Tube.

AK STEEL 441

Alloy Digest ◽  
2006 ◽  
Vol 55 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Ferritic Stainless Steel ◽  
High Temperature Oxidation ◽  
High Temperature Strength ◽  
Temperature Oxidation ◽  
Temperature Performance

Abstract AK Steel 441 has good high-temperature strength, an equiaxed microstructure, and good high-temperature oxidation resistance. The alloy is a niobium-bearing ferritic stainless steel. This datasheet provides information on composition, hardness, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-965. Producer or source: AK Steel.

AK STEEL 410S

Alloy Digest ◽  
2006 ◽  
Vol 55 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
High Temperatures ◽  
Heat Treating ◽  
Austenite Formation ◽  
Oxidation Resistant

Abstract AK Steel 410S is a fully ferritic stainless steel with elements added to retard austenite formation at high temperatures. The resulting low hardening allows for use as oxidation-resistant parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-964. Producer or source: AK Steel.

OUTOKUMPU MODA 410L/4003

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Low Cost ◽  
Heat Treating ◽  
Low Carbon ◽  
Alloy Steels ◽  
Corrosive Environments

Abstract Outokumpu Moda 410L/4003 is a weldable, extra low carbon, Cr-Ni, ferritic stainless steel that is best suited for mildly corrosive environments such as indoors, where the material is either not exposed to contact with water or gets regularly wiped dry, or outdoors, where some discoloration and superficial rusting are acceptable. It is a low-cost alternative to low-carbon non-alloy steels in certain applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1330. Producer or source: Outokumpu Oyj.

Sign in / Sign up

Export Citation Format

Share Document