scholarly journals Effect of different surface treatments and bonding modalities on the shear bond strength between metallic orthodontic brackets and glazed monolithic zirconia crowns

2018 ◽  
Vol 7 (1) ◽  
pp. 23 ◽  
Author(s):  
JamalY Amer ◽  
MohammadM Rayyan
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Orthodontic Brackets ◽  
Zirconia Crowns ◽  
Monolithic Zirconia

scholarly journals Effect of surface treatment of prefabricated teeth on shear bond strength of orthodontic brackets

2017 ◽  
Vol 22 (4) ◽  
pp. 47-52 ◽  
Author(s):  
Marina Cumerlato ◽  
Eduardo Martinelli de Lima ◽  
Leandro Berni Osorio ◽  
Eduardo Gonçalves Mota ◽  
Luciane Macedo de Menezes ◽  
...  
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Surface Treatments ◽  
Orthodontic Brackets ◽  
Positive Correlation ◽  
Diamond Bur ◽  
Group 2 ◽  
Group 1

ABSTRACT Objective: The aim of this in vitro study was to evaluate and compare the effects of grinding, drilling, sandblasting, and ageing prefabricated teeth (PfT) on the shear bond strength (SBS) of orthodontic brackets, as well as the effects of surface treatments on the adhesive remnant index (ARI). Methods: One-hundred-ninety-two PfT were divided into four groups (n = 48): Group 1, no surface treatment was done; Group 2, grinding was performed with a cylindrical diamond bur; Group 3, two drillings were done with a spherical diamond bur; Group 4, sandblasting was performed with 50-µm aluminum oxide. Before the experiment, half of the samples stayed immersed in distilled water at 37oC for 90 days. Brackets were bonded with Transbond XT and shear strength tests were carried out using a universal testing machine. SBS were compared by surface treatment and by ageing with two-way ANOVA, followed by Tukey’s test. ARI scores were compared between surface treatments with Kruskal-Wallis test followed by Dunn’s test. Results: Surface treatments on PfT enhanced SBS of brackets (p< 0.01), result not observed with ageing (p= 0.45). Groups II, III, and IV showed higher SBS and greater ARI than the Group 1 (p< 0.05). SBS was greater in the groups 3 and 4 (drilling, sandblasting) than in the Group 2 (grinding) (p< 0.05). SBS and ARI showed a positive correlation (Spearman’s R2= 0.57; p< 0.05). Conclusion: Surface treatment on PfT enhanced SBS of brackets, however ageing did not show any relevance. Sandblasting and drilling showed greater SBS than grinding. There was a positive correlation between SBS and ARI.

Influence of surface treatments on the shear bond strength of orthodontic brackets to porcelain

2008 ◽  
Vol 255 (2) ◽  
pp. 416-418 ◽  
Author(s):  
Cong Wang ◽  
Jishan Zeng ◽  
Shaoan Wang ◽  
Zheng Yang ◽  
Qian Huang ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Orthodontic Brackets

Efficacy of 4 surface treatments in increasing the shear bond strength of orthodontic brackets bonded to saliva-contaminated direct composites

2011 ◽  
Vol 70 (2) ◽  
pp. 65-70 ◽  
Author(s):  
Behnam Khosravanifard ◽  
Saeed Nemati-Anaraki ◽  
Soodeh Faraghat ◽  
Seyed Hadi Sajjadi ◽  
Hamid Rakhshan ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Orthodontic Brackets

Shear bond strength of metal/ceramic Interface after different surface treatments: an in vitro study. Resistência ao cisalhamento da interface metal/cerâmica após diferentes tratamentos de superfície: estudo in vitro

2013 ◽  
Author(s):  
Sílvia Fontes Do Amaral Pereira
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Surface Treatments ◽  
Vitro Study ◽  
Metal Ceramic

O objetivo do presente estudo in vitro foi verificar, através de teste de cisalhamento, a resistência de união da liga Wironia®light, à base de níquel-cromo sem berílio, sujeita a diferentes tratamentos de superfície, às cerâmicas Vita VM13 e Noritake. Foram confeccionados oitenta espécimes cilíndricos metálicos, com o auxílio de uma matriz de aço, nas dimensões de 4 mm de diâmetro por 4 mm de altura. Os espécimes foram divididos em oito grupos (n=10), de acordo com o tipo de tratamento superficial aplicado à liga metálica e com o tipo de cerâmica testada. Estes foram avaliados de acordo com os critérios de resistência ao cisalhamento e, com o auxílio de microscopia óptica, foi avaliada a área de cerâmica remanescente aderida ao metal após a fratura. Os corpos-de-prova do G6 (fabricados em Cerâmica Noritake com jateamento-26,401 ± 11,637 MPa) apresentaram maior resistência ao cisalhamento (p> 0,05) enquanto que os menores valores foram registrados no G4 (Cerâmica Vita com utilização de broca-13,440 ± 7,766 MPa). G6 (19425,4 μm2) apresentou a maior área de cerâmica aderida ao metal (p> 0,05) enquanto que o G4 (2310,2 μm2) apresentou a menor área. Concluiu-se que G6 obteve os valores mais altos de resistência ao cisalhamento e de remanescente cerâmico aderido à superfície metálica enquanto que o G4 obteve os valores mais baixos. Descritores: Restaurações metalo-cerâmicas; ligas de níquel-cromo;porcelana dentária.

scholarly journals Comparison of Shear Bond Strength Orthodontic Brackets Bonded to Zirconia and Lithium Disilicate Crowns

2019 ◽  
Vol 53 (1) ◽  
pp. 17-27 ◽  
Author(s):  
Blerim Mehmeti ◽  
Jeta Kelmendi ◽  
Donika Iiljazi-Shahiqi ◽  
Bleron Azizi ◽  
Suzana Jakovljevic ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Lithium Disilicate ◽  
Orthodontic Brackets
Sign in / Sign up

Export Citation Format

Share Document