scholarly journals Slide Mode and Fuzzy Logic Based Powertrain Controller for the Energy Management and Battery Lifetime Extension of Series Hybrid Electric Vehicles

2010 ◽  
Vol 8 (2) ◽  
pp. 1425-1432 ◽  
Author(s):  
Zheng Chen ◽  
Xi Zhang ◽  
Chris Chunting Mi
2021 ◽  
Vol 11 (7) ◽  
pp. 3192
Author(s):  
Muhammad Rafaqat Ishaque ◽  
Muhammad Adil Khan ◽  
Muhammad Moin Afzal ◽  
Abdul Wadood ◽  
Seung-Ryle Oh ◽  
...  

Due to increasing fuel prices, the world is moving towards the use of hybrid electric vehicles (HEVs) because they are environmentally friendly, require less maintenance, and are a green technology. The energy management system (EMS) plays an important role in HEVs for the efficient storage of energy and control of the power flow mechanism. This paper deals with the design, modeling, and result-oriented approach for the development of EMS for HEVs using a fuzzy logic controller (FLC). Batteries and supercapacitors (SCs) are used as primary and secondary energy storage systems (ESSs), respectively. EMS consists of the ultra-power transfer algorithm (UPTA) and FLC techniques, which are used to control the power flow. The UPTA technique is used to charge the battery with the help of a single-ended primary inductor converter (SEPIC) during regenerative braking mode. The proposed research examines and compares the performance of FLC with a proportional integral (PI) controller by using MATLAB (Simulink) software. Three scenarios are built to confirm the efficiency of the proposed design. The simulation results show that the proposed design with FLC has a better response as its rise time (2.6 m) and settling time (1.47 µs) are superior to the PI controller.


Author(s):  
Hadi Rahmeh ◽  
Angelo Bonfitto ◽  
Sanjarbek Ruzimov

Abstract This paper presents a comparison between a Fuzzy Logic and an Equivalent Consumption Minimization Strategy for the energy management of a Hybrid Electric Vehicle in P2 configuration, i.e. with the secondary energy converter located downstream the clutch. The design of the two methods is conducted aiming to minimize the fuel consumption. Although the adopted strategies are not charge sustaining, an additional goal of the techniques is to obtain a net energy extracted from the battery over a driving cycle that is not far from zero. The presented simulation results are obtained in the case of two homologation driving cycles, namely NEDC and WLTP. The objective of the study is to demonstrate that a non-optimal rule-based method can achieve a performance that is equivalent to a model-based optimal analytical approach.


Sign in / Sign up

Export Citation Format

Share Document