scholarly journals PLACEMENT OPTIMIZATION OF POSITIONING NODES: MAXIMIZING THE DISTINCTION OF INDOOR ZONES

2019 ◽  
Vol XLII-2/W13 ◽  
pp. 909-914
Author(s):  
D. Xenakis ◽  
M. Meijers ◽  
E. Verbree
Keyword(s):  
Indoor Positioning ◽  
Propagation Model ◽  
Radio Propagation ◽  
Optimization Process ◽  
Positioning System ◽  
Factors Affecting ◽  
Optimization Function ◽  
Radio Propagation Model ◽  
Definition Of ◽  
Indoor Positioning System

<p><strong>Abstract.</strong> The performance of an indoor positioning system is highly related to the placement of the transmitting nodes that are used as references for the positioning estimations. In this paper, we propose a methodology that can be used to optimize such a deployment and thus, increase the performance of an indoor positioning system that a) is based on Received Signal Strength (RSS) fingerprinting and b) is orientated towards providing location or zone estimations instead of exact positioning. The optimization process involves 4 fundamental components. Firstly, the modelling of the obstructions in the indoor environment and also the zone modelling. Then, the definition of the performance metric that can be used to evaluate each different deployment scenario, in which case, our proposed metric considers the separation area and distances between the zones in the RSS vector space. The third component is the radio propagation model, required for simulating the RSSs from each node, where a model based on the ray tracing technique is selected. Finally, the last component is the selection of the optimization function that will control and drive the whole optimization process by selecting which deployment schemes to evaluate. For that, the utilization of a Genetic Algorithm is proposed. Although the evaluation of this methodology is outside the paper’s scope, the key factors affecting the optimization performance the most, are expected to be a) the accuracy of the used indoor model and radio propagation model and b) the exact implementation of the optimization function.</p>

scholarly journals Light positioning: A high-accuracy visible light indoor positioning system based on attitude identification and propagation model

2018 ◽  
Vol 14 (2) ◽  
pp. 155014771875826 ◽  
Author(s):  
Qu Wang ◽  
Haiyong Luo ◽  
Aidong Men ◽  
Fang Zhao ◽  
Xile Gao ◽  
...  
Keyword(s):  
Visible Light ◽  
Light Propagation ◽  
Light Emitting Diode ◽  
Indoor Positioning ◽  
Propagation Model ◽  
Small Scale ◽  
Positioning System ◽  
Light Emitting ◽  
Algorithm Construct ◽  
Indoor Positioning System

With the booming development of green lighting technology, visible light-based indoor localization has attracted a lot of attention. Visible light-based indoor positioning technology leverages a light propagation model to pinpoint target location. Compared with the radio localization technology, visible light-based indoor positioning not only can achieve higher location accuracy, but also no electromagnetic interference. In this article, we propose LIPOS, a three-dimensional indoor positioning system based on attitude identification and visible light propagation model. The LIPOS system takes advantage of the existing lighting infrastructures to localize mobile devices that have light-sensing capabilities (e.g. a smartphone) using light emitting diode lamps as anchors. The system can accurately identify the attitude of a smartphone using its integrated sensors, distinguish different light emitting diode beacons using the fast Fourier transform algorithm, construct a position cost-function based on a visible light radiative decay model, and apply a nonlinear optimizing method to acquire the optimal estimation of final location. We have implemented the LIPOS system and evaluated it with a small-scale hardware testbed, as well as moderate-sized simulations. Extensive experiments are performed in three representative indoor environments—open-plan office, cubicle, and corridor, which not only demonstrate that the LIPOS can effectively avoid the negative effects of dynamic change of a smartphone’s attitude angle, but also show better locating accuracy and robustness, and obtain sub-meter level positioning accuracy.

scholarly journals High-Precision RTT-Based Indoor Positioning System Using RCDN and RPN

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3701
Author(s):  
Ju-Hyeon Seong ◽  
Soo-Hwan Lee ◽  
Won-Yeol Kim ◽  
Dong-Hoan Seo
Keyword(s):  
High Precision ◽  
Distance Estimation ◽  
Sampling Period ◽  
Multipath Fading ◽  
Indoor Positioning ◽  
Positioning System ◽  
Positioning Systems ◽  
Positioning Errors ◽  
Location Determination ◽  
Indoor Positioning System

Wi-Fi round-trip timing (RTT) was applied to indoor positioning systems based on distance estimation. RTT has a higher reception instability than the received signal strength indicator (RSSI)-based fingerprint in non-line-of-sight (NLOS) environments with many obstacles, resulting in large positioning errors due to multipath fading. To solve these problems, in this paper, we propose high-precision RTT-based indoor positioning system using an RTT compensation distance network (RCDN) and a region proposal network (RPN). The proposed method consists of a CNN-based RCDN for improving the prediction accuracy and learning rate of the received distances and a recurrent neural network-based RPN for real-time positioning, implemented in an end-to-end manner. The proposed RCDN collects and corrects a stable and reliable distance prediction value from each RTT transmitter by applying a scanning step to increase the reception rate of the TOF-based RTT with unstable reception. In addition, the user location is derived using the fingerprint-based location determination method through the RPN in which division processing is applied to the distances of the RTT corrected in the RCDN using the characteristics of the fast-sampling period.

Sign in / Sign up

Export Citation Format

Share Document