scholarly journals TERRAIN EXTRACTION BY INTEGRATING TERRESTRIAL LASER SCANNER DATA AND SPECTRAL INFORMATION

2015 ◽  
Vol XL-2/W4 ◽  
pp. 45-51 ◽  
Author(s):  
C. L. Lau ◽  
S. Halim ◽  
M. Zulkepli ◽  
A. M. Azwan ◽  
W. L. Tang ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanner ◽  
Digital Camera ◽  
Digital Terrain Model ◽  
Point Clouds ◽  
Spectral Information ◽  
Terrestrial Laser Scanner ◽  
Cloud Data ◽  
Terrain Model ◽  
Colour Image

The extraction of true terrain points from unstructured laser point cloud data is an important process in order to produce an accurate digital terrain model (DTM). However, most of these spatial filtering methods just utilizing the geometrical data to discriminate the terrain points from nonterrain points. The point cloud filtering method also can be improved by using the spectral information available with some scanners. Therefore, the objective of this study is to investigate the effectiveness of using the three-channel (red, green and blue) of the colour image captured from built-in digital camera which is available in some Terrestrial Laser Scanner (TLS) for terrain extraction. In this study, the data acquisition was conducted at a mini replica landscape in Universiti Teknologi Malaysia (UTM), Skudai campus using Leica ScanStation C10. The spectral information of the coloured point clouds from selected sample classes are extracted for spectral analysis. The coloured point clouds which within the corresponding preset spectral threshold are identified as that specific feature point from the dataset. This process of terrain extraction is done through using developed Matlab coding. Result demonstrates that a higher spectral resolution passive image is required in order to improve the output. This is because low quality of the colour images captured by the sensor contributes to the low separability in spectral reflectance. In conclusion, this study shows that, spectral information is capable to be used as a parameter for terrain extraction.

scholarly journals Comparison of Depth Camera and Terrestrial Laser Scanner in Monitoring Structural Deflections

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 201
Author(s):  
Michael Bekele Maru ◽  
Donghwan Lee ◽  
Kassahun Demissie Tola ◽  
Seunghee Park
Keyword(s):  
Optical Sensors ◽  
Point Cloud ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Point Clouds ◽  
Depth Camera ◽  
Terrestrial Laser Scanner ◽  
Cloud Data ◽  
3D Point Clouds ◽  
3D Information

Modeling a structure in the virtual world using three-dimensional (3D) information enhances our understanding, while also aiding in the visualization, of how a structure reacts to any disturbance. Generally, 3D point clouds are used for determining structural behavioral changes. Light detection and ranging (LiDAR) is one of the crucial ways by which a 3D point cloud dataset can be generated. Additionally, 3D cameras are commonly used to develop a point cloud containing many points on the external surface of an object around it. The main objective of this study was to compare the performance of optical sensors, namely a depth camera (DC) and terrestrial laser scanner (TLS) in estimating structural deflection. We also utilized bilateral filtering techniques, which are commonly used in image processing, on the point cloud data for enhancing their accuracy and increasing the application prospects of these sensors in structure health monitoring. The results from these sensors were validated by comparing them with the outputs from a linear variable differential transformer sensor, which was mounted on the beam during an indoor experiment. The results showed that the datasets obtained from both the sensors were acceptable for nominal deflections of 3 mm and above because the error range was less than ±10%. However, the result obtained from the TLS were better than those obtained from the DC.

scholarly journals POSSIBILITIES FOR USING LIDAR AND PHOTOGRAMMETRIC DATA OBTAINED WITH AN UNMANNED AERIAL VEHICLE FOR LEVEE MONITORING

2016 ◽  
Vol XLI-B1 ◽  
pp. 773-780 ◽  
Author(s):  
K. Bakuła ◽  
W. Ostrowski ◽  
M. Szender ◽  
W. Plutecki ◽  
A. Salach ◽  
...  
Keyword(s):  
Laser Scanner ◽  
Digital Camera ◽  
Digital Terrain Model ◽  
Point Clouds ◽  
Lidar Data ◽  
Unmanned Aerial System ◽  
Navigation Systems ◽  
Control Points ◽  
Terrain Model ◽  
Increase In Accuracy

This paper presents the possibilities for using an unmanned aerial system for evaluation of the condition of levees. The unmanned aerial system is equipped with two types of sensor. One is an ultra-light laser scanner, integrated with a GNSS receiver and an INS system; the other sensor is a digital camera that acquires data with stereoscopic coverage. Sensors have been mounted on the multirotor, unmanned platform the Hawk Moth, constructed by MSP company. LiDAR data and images of levees the length of several hundred metres were acquired during testing of the platform. Flights were performed in several variants. Control points measured with the use of the GNSS technique were considered as reference data. The obtained results are presented in this paper; the methodology of processing the acquired LiDAR data, which increase in accuracy when low accuracy of the navigation systems occurs as a result of systematic errors, is also discussed. The Iterative Closest Point (ICP) algorithm, as well as measurements of control points, were used to georeference the LiDAR data. Final accuracy in the order of centimetres was obtained for generation of the digital terrain model. The final products of the proposed UAV data processing are digital elevation models, an orthophotomap and colour point clouds. The authors conclude that such a platform offers wide possibilities for low-budget flights to deliver the data, which may compete with typical direct surveying measurements performed during monitoring of such objects. However, the biggest advantage is the density and continuity of data, which allows for detection of changes in objects being monitored.

scholarly journals PERSPECTIVE INTENSITY IMAGES FOR CO-REGISTRATION OF TERRESTRIAL LASER SCANNER AND DIGITAL CAMERA

2016 ◽  
Vol XLI-B3 ◽  
pp. 295-300
Author(s):  
Yubin Liang ◽  
Yan Qiu ◽  
Tiejun Cui
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Least Squares Method ◽  
Laser Scanner ◽  
Digital Camera ◽  
Point Clouds ◽  
Terrestrial Laser Scanner ◽  
Automatic Registration ◽  
Intensity Images ◽  
Intensity Image

Co-registration of terrestrial laser scanner and digital camera has been an important topic of research, since reconstruction of visually appealing and measurable models of the scanned objects can be achieved by using both point clouds and digital images. This paper presents an approach for co-registration of terrestrial laser scanner and digital camera. A perspective intensity image of the point cloud is firstly generated by using the collinearity equation. Then corner points are extracted from the generated perspective intensity image and the camera image. The fundamental matrix F is then estimated using several interactively selected tie points and used to obtain more matches with RANSAC. The 3D coordinates of all the matched tie points are directly obtained or estimated using the least squares method. The robustness and effectiveness of the presented methodology is demonstrated by the experimental results. Methods presented in this work may also be used for automatic registration of terrestrial laser scanning point clouds.

scholarly journals STUDI PEMANFAATAN TEKNOLOGI TERRESTRIAL LASER SCANNER UNTUK MENGHITUNG VOLUME PENGUPASAN OVERBURDEN DI PIT 2 ELEKTRIFIKASI BANKO BARAT PT. BUKIT ASAM, TBK. TANJUNG ENIM, SUMATERA SELATAN

2019 ◽  
Vol 1 (1) ◽  
pp. 47-60
Author(s):  
Ezil Defri Maharfi ◽  
Taufik Arief ◽  
Diana Purbasari
Keyword(s):  
Point Cloud ◽  
Laser Scanner ◽  
Point Clouds ◽  
Terrestrial Laser Scanner ◽  
Total Station ◽  
Cloud Data ◽  
Data Point ◽  
Cut And Fill

PT. Bukit Asam, Tbk. merupakan perusahaan pertambangan batubara yang terletak di Tanjung Enim, Kabupaten Muara Enim, Provinsi Sumatera Selatan. Selama ini pengukuran volume pengupasan overburden dilakukan menggunakan alat Total Station. Pengukuran area overburden yang luas dan bentuk permukaan yang beragam menggunakan Total Station dinilai kurang efektif karena lamanya waktu yang dibutuhkan dan rendahnya tingkat ketelitian. Oleh kerena itu, diperlukan alat yang dapat mengukur volume dengan cepat serta menghasilkan data ukuran volume yang detail dan dengan kerapatan tinggi. Salah satunya yaitu penggunaan Terrestrial Laser Scanner. Metode yang digunakan dalam melakukan pengukuran yaitu metode occupation and backsight. Pengukuran menggunakan metode occupation and backsight diperlukan dua titik yang telah diketahui koordinatnya yang digunakan sebagai titik berdiri alat dan untuk titik acuan (backsight). Metode registrasi yang digunakan yaitu metode occupation and backsight dan metode cloud to cloud. Data point clouds yang telah diregistrasi perlu dilakukan filtering untuk menghilangkan noise dan objek asing yang bukan lapisan overburden. Perhitungan volume dilakukan dengan metode cut and fill terhadap model tiga dimensi dari point cloud yang terbentuk. Data hasil perhitungan didapatkan volume pengupasan overburden selama Desember 2017 sampai dengan Mei 2018 adalah sebesar 847.937 m3, dengan rincian 255.700 m3 di bulan Desember 2017, 299.120 m3 di bulan Januari 2018, 227.543 m3 di Bulan Februari 2018 dan 65.572 m3 di bulan Maret 2018.

scholarly journals PERSPECTIVE INTENSITY IMAGES FOR CO-REGISTRATION OF TERRESTRIAL LASER SCANNER AND DIGITAL CAMERA

2016 ◽  
Vol XLI-B3 ◽  
pp. 295-300
Author(s):  
Yubin Liang ◽  
Yan Qiu ◽  
Tiejun Cui
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Least Squares Method ◽  
Laser Scanner ◽  
Digital Camera ◽  
Point Clouds ◽  
Terrestrial Laser Scanner ◽  
Automatic Registration ◽  
Intensity Images ◽  
Intensity Image

Co-registration of terrestrial laser scanner and digital camera has been an important topic of research, since reconstruction of visually appealing and measurable models of the scanned objects can be achieved by using both point clouds and digital images. This paper presents an approach for co-registration of terrestrial laser scanner and digital camera. A perspective intensity image of the point cloud is firstly generated by using the collinearity equation. Then corner points are extracted from the generated perspective intensity image and the camera image. The fundamental matrix F is then estimated using several interactively selected tie points and used to obtain more matches with RANSAC. The 3D coordinates of all the matched tie points are directly obtained or estimated using the least squares method. The robustness and effectiveness of the presented methodology is demonstrated by the experimental results. Methods presented in this work may also be used for automatic registration of terrestrial laser scanning point clouds.

scholarly journals POSSIBILITIES FOR USING LIDAR AND PHOTOGRAMMETRIC DATA OBTAINED WITH AN UNMANNED AERIAL VEHICLE FOR LEVEE MONITORING

2016 ◽  
Vol XLI-B1 ◽  
pp. 773-780 ◽  
Author(s):  
K. Bakuła ◽  
W. Ostrowski ◽  
M. Szender ◽  
W. Plutecki ◽  
A. Salach ◽  
...  
Keyword(s):  
Laser Scanner ◽  
Digital Camera ◽  
Digital Terrain Model ◽  
Point Clouds ◽  
Lidar Data ◽  
Unmanned Aerial System ◽  
Navigation Systems ◽  
Control Points ◽  
Terrain Model ◽  
Increase In Accuracy

This paper presents the possibilities for using an unmanned aerial system for evaluation of the condition of levees. The unmanned aerial system is equipped with two types of sensor. One is an ultra-light laser scanner, integrated with a GNSS receiver and an INS system; the other sensor is a digital camera that acquires data with stereoscopic coverage. Sensors have been mounted on the multirotor, unmanned platform the Hawk Moth, constructed by MSP company. LiDAR data and images of levees the length of several hundred metres were acquired during testing of the platform. Flights were performed in several variants. Control points measured with the use of the GNSS technique were considered as reference data. The obtained results are presented in this paper; the methodology of processing the acquired LiDAR data, which increase in accuracy when low accuracy of the navigation systems occurs as a result of systematic errors, is also discussed. The Iterative Closest Point (ICP) algorithm, as well as measurements of control points, were used to georeference the LiDAR data. Final accuracy in the order of centimetres was obtained for generation of the digital terrain model. The final products of the proposed UAV data processing are digital elevation models, an orthophotomap and colour point clouds. The authors conclude that such a platform offers wide possibilities for low-budget flights to deliver the data, which may compete with typical direct surveying measurements performed during monitoring of such objects. However, the biggest advantage is the density and continuity of data, which allows for detection of changes in objects being monitored.

scholarly journals Precision Evaluation and Fusion of Topographic Data Based on UAVs and TLS Surveys of a Loess Landslide

2021 ◽  
Vol 9 ◽  
Author(s):  
Zhonglei Mao ◽  
Sheng Hu ◽  
Ninglian Wang ◽  
Yongqing Long
Keyword(s):  
Point Cloud ◽  
Laser Scanner ◽  
Point Clouds ◽  
Terrestrial Laser Scanner ◽  
Point Cloud Data ◽  
Loess Landslide ◽  
Cloud Data ◽  
Topographic Data ◽  
Blind Area ◽  
Precision Evaluation

In recent years, low-cost unmanned aerial vehicles (UAVs) photogrammetry and terrestrial laser scanner (TLS) techniques have become very important non-contact measurement methods for obtaining topographic data about landslides. However, owing to the differences in the types of UAVs and whether the ground control points (GCPs) are set in the measurement, the obtained topographic data for landslides often have large precision differences. In this study, two types of UAVs (DJI Mavic Pro and DJI Phantom 4 RTK) with and without GCPs were used to survey a loess landslide. UAVs point clouds and digital surface model (DSM) data for the landslide were obtained. Based on this, we used the Geomorphic Change Detection software (GCD 7.0) and the Multiscale Model-To-Model Cloud Comparison (M3C2) algorithm in the Cloud Compare software for comparative analysis and accuracy evaluation of the different point clouds and DSM data obtained using the same and different UAVs. The experimental results show that the DJI Phantom 4 RTK obtained the highest accuracy landslide terrain data when the GCPs were set. In addition, we also used the Maptek I-Site 8,820 terrestrial laser scanner to obtain higher precision topographic point cloud data for the Beiguo landslide. However, owing to the terrain limitations, some of the point cloud data were missing in the blind area of the TLS measurement. To make up for the scanning defect of the TLS, we used the iterative closest point (ICP) algorithm in the Cloud Compare software to conduct data fusion between the point clouds obtained using the DJI Phantom 4 RTK with GCPs and the point clouds obtained using TLS. The results demonstrate that after the data fusion, the point clouds not only retained the high-precision characteristics of the original point clouds of the TLS, but also filled in the blind area of the TLS data. This study introduces a novel perspective and technical scheme for the precision evaluation of UAVs surveys and the fusion of point clouds data based on different sensors in geological hazard surveys.

scholarly journals Fitting Terrestrial Laser Scanner Point Clouds with T-Splines: Local Refinement Strategy for Rigid Body Motion

2021 ◽  
Vol 13 (13) ◽  
pp. 2494
Author(s):  
Gaël Kermarrec ◽  
Niklas Schild ◽  
Jan Hartmann
Keyword(s):  
Point Cloud ◽  
Goodness Of Fit ◽  
Laser Scanner ◽  
Point Clouds ◽  
Statistical Testing ◽  
Computational Time ◽  
Terrestrial Laser Scanner ◽  
Reference Surface ◽  
Local Refinement ◽  
Surface Approximation

T-splines have recently been introduced to represent objects of arbitrary shapes using a smaller number of control points than the conventional non-uniform rational B-splines (NURBS) or B-spline representatizons in computer-aided design, computer graphics and reverse engineering. They are flexible in representing complex surface shapes and economic in terms of parameters as they enable local refinement. This property is a great advantage when dense, scattered and noisy point clouds are approximated using least squares fitting, such as those from a terrestrial laser scanner (TLS). Unfortunately, when it comes to assessing the goodness of fit of the surface approximation with a real dataset, only a noisy point cloud can be approximated: (i) a low root mean squared error (RMSE) can be linked with an overfitting, i.e., a fitting of the noise, and should be correspondingly avoided, and (ii) a high RMSE is synonymous with a lack of details. To address the challenge of judging the approximation, the reference surface should be entirely known: this can be solved by printing a mathematically defined T-splines reference surface in three dimensions (3D) and modeling the artefacts induced by the 3D printing. Once scanned under different configurations, it is possible to assess the goodness of fit of the approximation for a noisy and potentially gappy point cloud and compare it with the traditional but less flexible NURBS. The advantages of T-splines local refinement open the door for further applications within a geodetic context such as rigorous statistical testing of deformation. Two different scans from a slightly deformed object were approximated; we found that more than 40% of the computational time could be saved without affecting the goodness of fit of the surface approximation by using the same mesh for the two epochs.

Design of Light-Small Mobile 3D Laser Measurement System

2013 ◽  
Vol 405-408 ◽  
pp. 3032-3036
Author(s):  
Yi Bo Sun ◽  
Xin Qi Zheng ◽  
Zong Ren Jia ◽  
Gang Ai
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Digital Camera ◽  
Scanning System ◽  
Point Cloud Data ◽  
3D Laser Scanning ◽  
Large Area ◽  
Cloud Data ◽  
Laser Scanning System

At present, most of the commercial 3D laser scanning measurement systems do work for a large area and a big scene, but few shows their advantage in the small area or small scene. In order to solve this shortage, we design a light-small mobile 3D laser scanning system, which integrates GPS, INS, laser scanner and digital camera and other sensors, to generate the Point Cloud data of the target through data filtering and fusion. This system can be mounted on airborne or terrestrial small mobile platform and enables to achieve the goal of getting Point Cloud data rapidly and reconstructing the real 3D model. Compared to the existing mobile 3D laser scanning system, the system we designed has high precision but lower cost, smaller hardware and more flexible.

Sign in / Sign up

Export Citation Format

Share Document