Composition Distribution of Acrylonitrile-Butadiene Copolymers as Analyzed by High-Performance Liquid Chromatography

1990 ◽  
Vol 63 (2) ◽  
pp. 181-190 ◽  
Author(s):  
N. Asada ◽  
H. Hosozawa ◽  
A. Toyoda ◽  
H. Sato
Keyword(s):  
Molecular Weight ◽  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Chemical Composition ◽  
Stationary Phase ◽  
High Performance ◽  
Adsorption Mechanism ◽  
Gradient Elution ◽  
Composition Distribution

Abstract The separation of acrylonitrile-butadiene copolymer (NBR) was investigated by high-performance liquid chromatography (HPLC). The copolymer was most successfully separated on the basis of chemical composition by using crosslinked 2-chloroacrylonitrile gel as the stationary phase and with a gradient elution of chloroform/n-hexane. The separation was found to be carried out by an adsorption mechanism and essentially independent of the molecular weight of the sample. The observed chemical composition distributions (CCD) agreed with those calculated from the copolymerization theory.

Analysis of organic impurities of besifloxacin hydrochloride by high performance liquid chromatography with isocratic and gradient elution.

2019 ◽  
Vol 16 ◽  
Author(s):  
Joanna Wittckind Manoel ◽  
Camila Ferrazza Alves Giordani ◽  
Livia Maronesi Bueno ◽  
Sarah Chagas Campanharo ◽  
Elfrides Eva Sherman Schapoval ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Mobile Phase ◽  
High Performance ◽  
Gradient Elution ◽  
Pharmaceutical Product ◽  
Raw Material ◽  
Isocratic Elution ◽  
Organic Impurities ◽  
Elution Method

Introduction: Impurity analysis is an important step in the quality control of pharmaceutical ingredients and final product. Impurities can arise from drug synthesis or excipients and even at small concentrations may affect product efficacy and safety. In this work two methods using high performance liquid chromatography (HPLC) were developed and validated for the evaluation of besifloxacin and its impurity synthesis, with isocratic elution and another with gradient elution. Method: The analysis by HPLC in isocratic elution mode was performed using a cyano column maintained at 25 °C. The mobile phase was composed by 0.5% triethylamine (pH 3.0): acetonitrile (88:12 v/v) eluted at a flow rate of 1.0 ml/min with detection at 330 nm. The gradient elution method was carried out with the same column and mobile phase components only modifying the rate between organic and aqueous phase during analysis. The procedures have been validated according to internationally accepted guidelines, observing results within acceptable limits. Results: The methods presented were found to be linear in the 140 to 260 µg/ml range for besifloxacin and 0.3 to 2.3 µg/ml for an impurity named A. The limits of detection and quantification were respectively 0.07 and 0.3 µg/ml for impurity A, with a 20 µL injection volume. The precision achieved for all analyses performed provided RSD inter-day equal to 6.47 and 6.36% for impurity A with isocratic elution and gradient, respectively. The accuracy was higher than 99% and robustness exhibited satisfactory results. In the isocratic method an analysis time of 25 min and 15 min was obtained for gradient. For impurity A, the number of theoretical plates in the isocratic mode was about 5000 while in the gradient mode it was about 45000, hence, it made the column more efficient by changing the mobile phase composition during elution. In besifloxacin raw material and in pharmaceutical product used in this study, other related impurities were present but but impurity A was searched for and not detected Conclusion: The proposed methods can be applied for quantitative determination of impurities in the analysis of the besifloxacin raw material, as well as in ophthalmic suspension of the drug, considering the quantitation limit.

Simultaneous Determination of Six Components in Jingzhiguanxin Tablet by High-Performance Liquid Chromatography

2019 ◽  
Vol 15 (2) ◽  
pp. 130-137
Author(s):  
Hui Jiang ◽  
Lianhao Fu ◽  
Yu Wang ◽  
Shaozhi Wang ◽  
Xiaoxu Zhang ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Gradient Elution ◽  
Tanshinone Iia ◽  
Array Detector ◽  
Control Analysis ◽  
Active Components ◽  
Quality Control Analysis

Background: Jingzhiguanxin (JZGX) tablet, a traditional Chinese prescription, is commonly used for treating coronary heart disease and angina pectoris in the clinic. There are six active components (Danshensu (DSS), Protocatechuic aldehyde (PD), Paeoniflorin (PF), Ferulic acid (FA), Salvianolic acid B (Sal B) and Tanshinone IIA (TA)) in JZGX tablet. </P><P> Objective: In this paper, a simple and reliable method was used for simultaneous determining the six active components by high-performance liquid chromatography coupled with diode array detector (HPLC-DAD). Methods: These six active components were separated on an Agilent Zorbax Eclipse XDB-C18 column (150 mmx4.6 mm, 5 µm) at 30 °C. Acetonitrile (A), methanol (B) and 0.5% H3PO4 aqueous solution (C) were used as mobile phase for gradient elution. The flow rate was 1 mL/min and the detection wavelengths were set at 280 nm for DSS, PD and Sal B, 230 nm for PF, 320 nm for FA and 270 nm for TA, respectively. Results: All of the six components showed good linearity regressions (r2≥0.9997) in the detected concentration range. The recovery rates and coefficient of variation (CV) for all analytes were 98.66%- 100.18% and 0.75%-1.89%, respectively. This method was successfully applied to simultaneously determine the six components in JZGX tablet from different batches and manufacturers. Conclusion: The validated method can be used in routine quality control analysis of JZGX tablet without any interference.

Sign in / Sign up

Export Citation Format

Share Document