THE ANALYSIS OF FACTORS INFLUENCING THE VALUES OF SANDY SOILS SHEAR STRENGTH PARAMETERS OBTAINED BY DIRECT SHEAR TEST

2011 ◽  
Author(s):  
Marian Drusa
Keyword(s):  
Shear Strength ◽  
Direct Shear Test ◽  
Shear Test ◽  
Sandy Soils ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Factors Influencing

scholarly journals Experimental Study on Variation Law and Mechanism of Soil Shear Strength Parameters along the Slope

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Yanhai Wang ◽  
Jianlin Li ◽  
Qiao Jiang ◽  
Yisheng Huang ◽  
Xinzhe Li
Keyword(s):  
Shear Strength ◽  
Direct Shear Test ◽  
Shear Test ◽  
Three Gorges Reservoir Area ◽  
Silty Clay ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Undisturbed Soil ◽  
Soil Shear Strength

Under the action of rainwater seepage, geological origin, and human activities, the soil shear strength parameters will have spatial variability along the slope direction. After collecting samples of silty clay at a slope in the Three Gorges Reservoir area as the research object, not only the large-scale direct shear test was carried out on the site but also the direct shear test, water content test, density test, and particle grading analysis test were carried out in the laboratory with the undisturbed soil. The variation law and mechanism of soil shear strength parameters along slope were studied. The results indicate the following: (1) The coefficient of variation of shear strength parameters along the slope is relatively large. With the decrease of the elevation of the test location, the cohesion value tends to be strengthened, while the friction angle tends to degrade. (2) The mechanism of the variation law of soil shear strength parameters along the slope, which is mainly due to the decrease of the elevation, the decrease of the edges and angles between the particles, and the increase of the clay content is determined. (3) The variation model of shear strength parameters along the slope is proposed, which can provide a reference for relevant projects.

Development of a Modified in situ Direct Shear Test Technique to Determine Shear Strength Parameters of Mine Rock Piles

2008 ◽  
Vol 31 (3) ◽  
pp. 101152 ◽  
Author(s):  
L. D. Suits ◽  
T. C. Sheahan ◽  
A. Fakhimi ◽  
K. Boakye ◽  
D. J. Sperling ◽  
...  
Keyword(s):  
Shear Strength ◽  
Direct Shear Test ◽  
Shear Test ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Test Technique

Effect of Sample Size on TDA Shear Strength Parameters in Direct Shear Tests

2020 ◽  
Vol 2674 (9) ◽  
pp. 1110-1119 ◽  
Author(s):  
Khaled Zahran ◽  
Hany El Naggar
Keyword(s):  
Shear Strength ◽  
Shear Test ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Shear Tests ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Direct Shear Tests ◽  
Shear Box ◽  
Box Dimensions

Tire-derived aggregate (TDA), a relatively new construction material, has been gaining acceptance as a backfill material for embankments, trenches, and earth-retaining structures because of its lightweight and excellent geotechnical properties. Type A TDA has a basic geometric shape, with particles approximately 12 to 100 mm in size. As a result of the simplicity and accuracy of the direct shear test, most laboratories choose this test in preference to more complex tests. However, TDA requires large-scale direct shear apparatus because of the consistently large size of its particles, and few facilities own this type of apparatus. Depending on the shear box dimensions, the aspect ratio of the particle size to the box dimensions may lead to variations in the shear strength results of the sample being evaluated. This research focuses on studying the effect of TDA sample size on the shear strength results of direct shear tests by using five different shear box sizes. The findings show that the angle of internal friction increases slightly as the dimensions of the shear box decrease. It was found that the maximum variation in the angle of internal friction and the cohesion results of the different shear boxes was only 1.9° and 2.4 kPa, respectively. These differences should be taken into consideration when TDA shear test results are used in the geotechnical design. It is recommended that a shear box with an aspect ratio (W/Dmax) greater than or equal to 4 should be used when evaluating the shear strength parameters of TDA.

Using Excel to Evaluate Shear Strength Parameters of Soil

2013 ◽  
Vol 709 ◽  
pp. 579-582
Author(s):  
Meng Hua Fan
Keyword(s):  
Shear Strength ◽  
Shear Test ◽  
Triaxial Tests ◽  
Mathematics Model ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Direct Shear Tests ◽  
Allowable Deviation ◽  
Coulomb Failure

It is difficult to determine the Mohr-Coulomb failure envelope visually, and it is strongly influenced by abnormal test data evaluating the shear strength parameters of soil via trend line and unable to adjust the scope of permissible error. So it is recommended to evaluate shear strength parameters of soil using Solver of Excel for direct shear tests and triaxial tests and you can control the allowable deviation. The mathematics model of nonlinear programming was established to evaluate shear strength parameters of soil from the results of direct shear test and triaxial shear test. The related Excel worksheet was created and the optimum results of the objective function were obtained by setting the Solver parameters dialog box accurately. The method is simple, inexpensive and rapid.

scholarly journals Direct Shear Test of Unsaturated Soil

2017 ◽  
Vol 21 (4) ◽  
pp. 183-188
Author(s):  
Peng He ◽  
Liuying Sun ◽  
Zhen Wang
Keyword(s):  
Shear Strength ◽  
Unsaturated Soil ◽  
Direct Shear Test ◽  
Shear Test ◽  
Test Scheme ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Shear Tests ◽  
Direct Shear Tests ◽  
Good Agreement

The present study focuses on some tentative laboratory tests using a newly-constructed modified direct shear test apparatus. The single-stage and multistage direct shear tests were performed to determine the shear rate and test scheme of unsaturated shear test. Shear strength parameters of unsaturated soil in different conditions are obtained and the tests indicate good agreement with typical theories of unsaturated soil, the nonlinear matric suction failure envelope is determined. Some shear strength equations are also fitted through the experimental results. 

Sign in / Sign up

Export Citation Format

Share Document