scholarly journals THE INFLUENCE OF BREAKER TYPE ON RIPRAP STABILITY

1970 ◽  
Vol 1 (12) ◽  
pp. 95 ◽  
Author(s):  
John P. Ahrens

Test data related to the stability of dumped quarry stone riprap under wave action is presented The tests were conducted in the large 635-foot wave tank at the Coastal Engineering Research Center at near prototype scale The data indicate that the stability of the riprap is strongly influenced by the type of breaker The lowest riprap stability is associated with a breaker type intermediate between plunging and surging, sometimes referred to as a collapsing breaker.

Author(s):  
Khairana Ayu Shabrina ◽  
Rudi Siap Bintoro ◽  
Giman Giman

<p>Teluk Prigi merupakan perairan di pesisir Samudera Hindia yang dikelilingi oleh bentang alam tebing yang tinggi sehingga wilayah pesisir yang memiliki kondisi dinamis dapat mengakibatkan terjadinya perubahan garis pantai apabila tidak dikelola dengan baik. Maka dari itu pada penelitian ini bertujuan untuk mengetahui faktor oseanografi yang menyebabkan terjadinya perubahan garis pantai. Metode yang digunakan terdiri dari pemisahan arus, peramalan gelombang, gelombang pecah, energi gelombang dan refraksi gelombang dengan menggunakan metode menurut <em>Coastal Engineering Research Center </em>(CERC). Selain itu ekstraksi garis pantai dengan metode <em>NDWI (Normal Differential Water Index)</em>, dan analisis jenis sedimen menggunakan modul yang dikeluarkan oleh Pusjatan Balitbang PU. Faktor oseanografi yang dominan menjadi penyebab perubahan garis pantai adalah gelombang bangkitan angin yang pola gelombangnya mengalami perubahan arah yang cenderung tegak lurus pantai, selain itu arus pasang surut menjadi faktor pendukung dengan kecepatan 0,0037 m/s bergerak menuju Utara. Sehingga, kondisi garis pantai pada tahun 2003 dan 2014, 2014 dan 2018 luasan sedimentasi terbesar mencapai 28.949 m<sup>2</sup> dan 52.020 m<sup>2</sup> yang berada di Desa Prigi. Sedangkan Sedangkan lokasi abrasi pada tahun 2003 dan 2014, 2014 dan 2018 luasnya mencapai 4.204 m<sup>2</sup> dan 3.326 m<sup>2</sup>.</p>


1991 ◽  
Vol 18 (6) ◽  
pp. 916-925 ◽  
Author(s):  
K. R. Hall ◽  
Joseph S. Kao

The effect of gradation of armour stones and the amount of rounded stones in the armour on dynamically stable breakwaters was assessed in a two-dimensional wave flume. A total of 52 series of tests were undertaken at the Coastal Engineering Research Laboratory of Queen's University, Kingston, Canada using irregular waves. Profiles of the structure during the various stages of reshaping were measured using a semiautomatic profiler developed for this study. Four gradations of armour stones were used, giving a range in uniformity coefficient of 1.35–5.4. The volume of stones and the initial berm width required for the development of a stable profile, along with the extent to which the toe of the structure progressed seaward, were chosen as representative parameters of the reshaped breakwater. The results indicated that the toe width formed as a result of reshaping and the area of stones required for reshaping were dependent on the gradation of the armour stones. The initial berm width required for reshaping was also found to be dependent on the gradation and the percentage of rounded stones in the armour. Key words: breakwaters, dynamic stability, hydraulic models, stability, armour stones.


Sign in / Sign up

Export Citation Format

Share Document