Synthesis and Characterization of ZnO from Thermal Decomposition of Precipitated Zinc Oxalate Dihydrate as an Anode Material of Li-Ion Batteries

Zinc oxide (ZnO) is one of the most promising materials applied in Li-ion batteries. In this research, ZnO was synthesized by the thermal decomposition of zinc oxalate dihydrate. This precursor was obtained from the precipitation process of zinc sulfate with oxalic acid. In-depth studies were carried out on the effect of various heating temperatures of zinc oxalate dihydrate precursors on ZnO synthesis. The as-prepared materials were characterized by XRD, SEM, and FTIR. Based on the XRD analysis, the presence of the ZnO-wurtzite phase can be confirmed in samples heated at temperatures above 400 °C. Meanwhile, SEM-EDX results showed that the ZnO particles have a micron size. Cells with ZnO samples as anodes have low columbic efficiency. In contrast, cells with ZnO/Graphite composite anodes have a relatively large capacity compared to pure graphite anodes. Overall, based on the consideration of the characterization results and electrochemical performance, the optimal sintering temperature to obtain ZnO is 600 °C with a cell discharge capacity of ZnO anode and in the form of graphite composites is 356 mAh/g and 450 mAh/g, respectively. This suggests that ZnO can be used as an anode material and an additive component to improve commercial graphite anodes’ electrochemical performance.

Formation of zinc oxalate from zinc white in various oil binding media: the influence of atmospheric carbon dioxide by reaction with 13CO2

The formation of metal oxalates in paintings has recently gained a great deal of interest within the field of heritage science as several types of oxalate compounds have been identified in oil paintings. The present work investigates the formation of metal oxalates in linseed oil in the presence of the artists’ pigments zinc white, calcite, lead white, zinc yellow, chrome yellow, cadmium yellow, cobalt violet, and verdigris. The oil paint films were artificially photo-aged by exposure to UVA light at low and high relative humidity, and afterwards analysed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The results showed that, compared to the other pigments investigated, zinc white is especially prone to metal oxalate formation and that high humidity is a crucial factor in this process. Consequently, the reactivity and photo-aging of ZnO in various oil binding media was investigated further under simulated solar radiation and at high relative humidity levels. ATR-FTIR showed that zinc oxalate is formed in all oil binding media while X-ray powder diffraction (PXRD) revealed it was mainly present in an amorphous state. To examine whether atmospheric CO2(g) has any influence on the formation of zinc oxalate, experiments with isotopically enriched 13CO2(g) were performed. Based on ATR-FTIR measurements, neither Zn13C2O4 nor Zn13CO3 were formed which suggests that the carbon source for the oxalate formation is most likely the paint itself (and its oil component) and not the surrounding atmosphere.

ZNO Nanostructures & Microstructures: Synthesis using Different Materials

Thermal decomposition and heat treatment method is used for the preparation of ZnO and the precursor are used for this is zinc oxalate, zinc nitrate and zinc sulfate after preparation of ZnO study on its optical and electrical properties has also been performed then its photoconductivity in air and two minutes rise and fall curve also measured. Which is very useful in study of switching characteristic of materials. XRD clearly shows that prepared material has good quality of ZnO, SEM indicates that synthesized materials of wurzite structure. Two minutes rise and fall curve shows that zinc oxalate has the best switching time among all three materials