In oral rehabilitation, the treatment of partial edentulism (PEd) is performed by removable partial dentures (RPD) or assembled prosthetic works (APW) composed of several components, fixed to the prosthetic field (Pa) and a removable one (Pb), in order to facilitate the daily hygiene but also the damping of the occlusal forces applied in mastication. Cobalt-Chromium alloys are materials used to manufacture modern prosthetic assembles. In order for this study to be relevant, it was necessary to standardize the design of the framework (Pa) in terms of shape and volume so that the experiment could be reproducible for the five Co-Cr alloys: 0-A (Co-Cr-Mo), 5-A and 10-A (Co-Cr-Mo-W), 15-A and 16.4-A (Co-Cr-W-Fe) and for the three fabrication methods of dental assembled prosthetic frameworks: refractory duplicate method (RD) resulting removable framework (Pb), direct construction method (DC) resulting removable framework (Pb-) and casting over metal method (CoM) resulting removable framework (Pb+). The time allocated to the adaptation process (AP), mechanical processing and sandblasting, in order to assemble the two components was between 43–70 min, even though the assembly between the Pa-framework and the complementary framework (Pb+) was not necessary, CoM-method hs been provide the elimination of AP step. By applying the arithmetic simple rule of three, the percentages for each of the three methods used were calculated, the values of the difference were obtained. The CoM method improves the joining precision between the components of the removable assembly of prosthetic frameworks by 91.7% compared to the RD method and by 80.62% compared to the DC method. According to the efficiency of the methods used in the precision of joining between frameworks components, their order is: casting over metal, direct construction and refractory duplicate method.
Optimization of the Manufacturing Process by Molding Cobalt-Chrome Alloys in Assembled Dental Frameworks
