Three-phase induction motors (TIMs) play a key role in industrial production lines. Due to their robustness and versatility, TIMs are commonly used to drive different devices like fans, conveyors, sieves, and compressors. However, these devices are often exposed to mechanical and electrical faults. Among them, failures in stator winding insulation lead to severe damage to the TIMs and can cause operational interruptions. Therefore, several approaches have been developed to monitor electrical faults in induction motors. The acoustic emission (AE) stands out as an efficient non-invasive technique (NIT) for TIM diagnosis. In this work, the AE analysis was applied to detect winding insulation faults and identify which electrical phase was affected. To achieve this proposal, a TIM was subjected to insulation faults in each of the three electrical phases, and the acoustic signals were acquired by four piezoelectric sensors attached to the motor. These signals were processed using a new technique, which calculates the energy of a specific range of the signal spectrum and assigns the energy values of each piezoelectric sensor to a coordinate axis (x, y). By ploting the values for each fault condition, this technique allows the detection of insulation faults and correctly identifies the affected phase by clustering the resulting values. Finally, the proposed methodology presented satisfactory results in winding insulation diagnosis.
Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's vector approach
