Application of robust control techniques to a mobile robot system

1992 ◽  
Vol 9 (7) ◽  
pp. 893-913 ◽  
Author(s):  
Kai Liu ◽  
Frank L. Lewis
2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Fatma Massaoudi ◽  
Dorsaf Elleuch ◽  
Tarak Damak

In this paper, we present robust control techniques applied on a manipulator robot system: modified sliding mode control (MSMC) and backstepping control (BSC). The purpose is to evaluate SMC and BSC performances, taking into account the model uncertainties. Then, the obtained results of MSMC technique are compared with those of the adaptive sliding mode. Both methods have comparable simulation results which show a good quality of robustness. However, simulation results prove that the modified SMC is more robust, mostly under the effect of external variations and uncertainties.


Author(s):  
Ahmed J. Abougarair ◽  
Ali S. Elmolihi

Robots have been used in many applications in the past few decades. Moreover, due to high nonlinearity behavior of these systems, an optimal and robust control design approaches have been considered to stabilize and improve their performance and robustness. The uncertainties of the time delay on the output states of the mobile robot system have a significant influence on the system nominal performance. As a result, the work becomes here to address the influence of these uncertainties on the robot system performance. In order to achieve this objective, the nonlinear controller via sliding mode control (SMC) is designed by selecting a suitable sliding surface dynamics in which the considered robot displacement and tilt angle are sliding on. The lyapunov function is considered here to accomplish  the design of the sliding control signals for robot stabilization. Furthermore, the stability of the considered system is guaranteed due to convergence of  the lyapunov functions into zero when the state trajectories tend to desired set points. In addition, we consider the trajectory tracking and stabilization of TWBMR system using parallel double loop PID controllers whose controllers gains are tuning via linear quadratic regulator (LQR) approach.  Finally, to demonstrate the effectiveness of SMC and PID-LQR design methods,  the comparison is carried out when the nominal and uncertain conditions.


Author(s):  
Zheng Xiao

Background: In order to study the interference of wired transmission mode on robot motion, a mobile robot attitude calculation and debugging system based on radio frequency (RF) technology is proposed. Methods: Microcontroller STM32 has been used as the control core for the attitude information of the robot by using MEMS gyroscope and accelerometer. The optimal attitude Angle of the robot is calculated through nRF24L01 which is the core of the wireless communication module, attitude acquisition module and wireless data communication upper computer application platform. Results: The results shows that the positioning accuracy is better than±5mm. Conclusion: The experimental results show that the proposed attitude solving and debugging system of mobile robot based on RF technology has better reliability and real-time performance. The propped model is convenient for debugging of mobile robot system and has certain engineering application value.


2006 ◽  
Vol 23 (6-7) ◽  
pp. 441-459 ◽  
Author(s):  
Patric Jensfelt ◽  
Gunnar Gullstrand ◽  
Erik Förell
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document