Control of Coherent Structures Shedding and Generation of Sound in Bluff-Body Wake Flow

Author(s):  
S. P. Bardakhanov ◽  
O. V. Belay
Author(s):  
Santosh J. Shanbhogue ◽  
Tim C. Lieuwen

This paper describes an experimental investigation of the flame sheet dynamics of an acoustically forced bluff body flame over a range of perturbation frequencies and amplitudes. When acoustically excited, the flame sheet displays well defined, periodic corrugations, presumably due to flame sheet perturbations created at its attachment point that convect downstream, as well as the rollup of shear layer instabilities into large scale coherent structures. The dynamics of the flame front response, such as its growth and decay in the bluff body wake, disturbance convection velocity, sub-harmonic response, and total flame area is discussed.


2013 ◽  
Vol 720 ◽  
pp. 393-423 ◽  
Author(s):  
F. Thiesset ◽  
L. Danaila ◽  
R. A. Antonia

AbstractWe assess the extent to which local isotropy (LI) holds in a wake flow for different initial conditions, which may be geometrical (the shape of the bluff body which creates the wake) and hydrodynamical (the Reynolds number), as a function of the dynamical effects of the large-scale forcing (the mean strain, $ \overline{S} $, combined with the strain induced by the coherent motion, $\tilde {S} $). LI is appraised through either classical kinematic tests or phenomenological approaches. In this respect, we reanalyse existing LI criteria and formulate a new isotropy criterion based on the ratio between the turbulence strain intensity and the total strain ($ \overline{S} + \tilde {S} $). These criteria involve either time-averaged or phase-averaged quantities, thus providing a deeper insight into the dynamical aspect of these flows. They are tested using hot wire data in the intermediate wake of five types of obstacles (a circular cylinder, a square cylinder, a screen cylinder, a normal plate and a screen strip). We show that in the presence of an organized motion, isotropy is not an adequate assumption for the large scales but may be satisfied over a range of scales extending from the smallest dissipative scale up to a scale which depends on the total strain rate that characterizes the flow. The local value of this scale depends on the particular nature of the wake and the phase of the coherent motion. The square cylinder wake is the closest to isotropy whereas the least locally isotropic flow is the screen strip wake. For locations away from the axis, the study is restricted to the circular cylinder only and reveals that LI holds at scales smaller than those that apply at the wake centreline. Arguments based on self-similarity show that in the far wake, the strength of the coherent motion decays at the same rate as that of the turbulent motion. This implies the persistence of the same degree of anisotropy far downstream, independently of the scale at which anisotropy is tested.


Author(s):  
Stefan Siegel ◽  
Jürgen Seidel ◽  
Kelly Cohen ◽  
Selin Aradag ◽  
Thomas McLaughlin

Author(s):  
Monsif Shinneeb ◽  
Ram Balachandar

PIV measurements were made to investigate the turbulent wake flow generated by a vertical sharp-edged flat plate suspended in a shallow channel flow with a gap near the bed. The purpose of this study is to investigate the behaviour of large vortical structures in the wake flow. The investigation focused on the horizontal velocity field in the mid-distance between the bottom bed and the top free surface. Two different gap heights between the channel bed and the bottom edge of the bluff body was studied. These two cases were compared to the no-gap flow case which is considered as a reference case. The Reynolds number based on the water depth was 45,000. The large vortical structures were exposed by analyzing the PIV velocity fields using the proper orthogonal decomposition (POD) method. Only few modes were used for the POD reconstruction of the velocity fields to recover ∼50% of the turbulent kinetic energy. A vortex identification algorithm was then employed to quantify the number, size, circulation, and direction of rotation of the exposed vortices. A statistical analysis of the distribution of number, size, and strength of the identified vortices was carried out to explore the characteristics of the vortical structures. The results revealed that the number of vortical structures increased as a result of the gap flow with a corresponding decrease in the vortex size and strength. This behaviour is attributed to the production of new vortices and the enhancement of the tearing process.


Author(s):  
Smriti Srivastava ◽  
Sudipto Sarkar

One of the most important researches in bluff body aerodynamics is to control the shear layer evolution leading to vortex formation. This kind of research is closely associated with reduction of aerodynamics forces and acoustic noise. Passive and active control of wake-flow from bluff bodies have received a great deal of attention in the last few decades [1–4]. Keeping this in mind, authors investigate the interaction of a square cylinder (side of the square = a) wake with a flat plate (length L = a, width w = 0.1a) boundary layer positioned at various downstream locations close to the cylinder. The gap-to-side ratios are maintained at G/a = 0, 0.5, 1 and 2 (where G is the gap between square cylinder and plate), and the simulation is performed at a Reynolds number, Re = 100 (Re = U∞a/v, where U∞ is free stream velocity and v is kinematic viscosity). Instantaneous flow visualization, aerodynamic forces and vortex shedding frequencies for all cases are described to gain insight about the changes associated with wake of the cylinder when a short plate is kept in its downstream.


Sign in / Sign up

Export Citation Format

Share Document