An analytical solution of transverse vibration of rectangular plates simply supported at two opposite edges with arbitrary number of elastic line supports in one way

1996 ◽  
Vol 17 (8) ◽  
pp. 773-779 ◽  
Author(s):  
Zhou Ding
Keyword(s):  
Analytical Solution ◽  
Transverse Vibration ◽  
Arbitrary Number ◽  
Rectangular Plates ◽  
Elastic Line ◽  
Simply Supported

scholarly journals Series-Based Solution for Analysis of Simply Supported Rectangular Thin Plate with Internal Rigid Supports

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Abubakr E. S. Musa ◽  
Husain J. Al-Gahtani
Keyword(s):  
Analytical Solution ◽  
Bending Moment ◽  
Accurate Solution ◽  
Rectangular Plates ◽  
Compatibility Conditions ◽  
Element Analysis ◽  
Simply Supported ◽  
The Finite Element Analysis ◽  
Rigid Supports ◽  
The Given

In this study, Navier’s solution for the analysis of simply supported rectangular plates is extended to consider rigid internal supports. The proposed method offers a more accurate solution for the bending moment at the critical section and therefore serves as a better analytical solution for design purposes. To model the plate-support interaction, the patched areas representing the contact between the plate and supports are divided into groups of cells. The unknown internal reactions at the centers of the divided cells are obtained by satisfying the compatibility conditions at the centers of the cells. Three numerical examples are presented to demonstrate the accuracy of the proposed analytical solution. The given examples reveal good agreements with those obtained by the finite element analysis. In addition, they show the advantage of the new solution as compared to the existing analytical solution which inaccurately estimates the location and magnitude of the maximum bending moment.

Three-dimensional elasticity solution of simply supported functionally graded rectangular plates with internal elastic line supports

2009 ◽  
Vol 44 (4) ◽  
pp. 249-261 ◽  
Author(s):  
Y P Xu ◽  
D Zhou
Keyword(s):  
Boundary Conditions ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Three Dimensional ◽  
Lower Surface ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Elastic Line ◽  
Simply Supported ◽  
Three Dimensional Elasticity

This paper studies the stress and displacement distributions of simply supported functionally graded rectangular plates with internal elastic line supports. The Young's modulus is graded through the thickness following the exponential law and the Poisson's ratio is kept constant. On the basis of three-dimensional elasticity theory, the solutions of displacements and stresses of the plate under static loads, which exactly satisfy the governing differential equations and the simply supported boundary conditions at four edges of the plate, are analytically derived. The reaction forces of the internal elastic line supports are regarded as the unknown external forces acting on the lower surface of the plate. The unknown coefficients in the solutions are then determined by the boundary conditions on the upper and lower surfaces of the plate. Convergence and comparison studies demonstrate the correctness and effectiveness of the proposed method. The effect of variations in Young's modulus on the displacements and stresses of rectangular plates and the effect of internal elastic line supports on the mechanical properties of plates are investigated.

scholarly journals Analytical solution to bending of stiffened and continuous antisymmetric laminates

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
Liecheng Sun ◽  
Issam E. Harik
Keyword(s):  
Differential Equation ◽  
Partial Differential Equation ◽  
Analytical Solution ◽  
Displacement Function ◽  
The Other ◽  
Order Partial Differential Equation ◽  
Eighth Order ◽  
Coupling Problem ◽  
Simply Supported ◽  
General Response

AbstractAnalytical Strip Method is presented for the analysis of the bending-extension coupling problem of stiffened and continuous antisymmetric thin laminates. A system of three equations of equilibrium, governing the general response of antisymmetric laminates, is reduced to a single eighth-order partial differential equation (PDE) in terms of a displacement function. The PDE is then solved in a single series form to determine the displacement response of antisymmetric cross-ply and angle-ply laminates. The solution is applicable to rectangular laminates with two opposite edges simply supported and the other edges being free, clamped, simply supported, isotropic beam supports, or point supports.

Deformation of Rectangular Slender Webplates with Boundary Members Flexible in the Webplate Plane

1966 ◽  
Vol 17 (4) ◽  
pp. 371-394 ◽  
Author(s):  
J. Djubek
Keyword(s):  
Linear Problem ◽  
Numerical Results ◽  
Rectangular Plates ◽  
Simply Supported ◽  
Non Linear

SummaryThe paper presents a solution of the non-linear problem of the deformation of slender rectangular plates which are stiffened along their edges by elastically compressible stiffeners flexible in the plane of the plate. The webplate is assumed to be simply-supported along its contour. Numerical results showing the effect of flexural and normal rigidity of stiffeners are given for a square webplate loaded by shear and compression.

Sign in / Sign up

Export Citation Format

Share Document