Investigation of the wear resistance of metastable austenitic steels under dry sliding-friction conditions

1972 ◽  
Vol 5 (5) ◽  
pp. 461-464 ◽  
Author(s):  
L. G. Korshunov ◽  
R. I. Mints
Keyword(s):  
Wear Resistance ◽  
Sliding Friction ◽  
Austenitic Steels ◽  
Dry Sliding ◽  
Dry Sliding Friction

Multiple Reflow Influence over the FeCoCrAlTiCuNiMo Coating Obtained by Plasma Metallization on its Wear Resistance under Dry Friction

2021 ◽  
Vol 410 ◽  
pp. 475-481
Author(s):  
Anvar M. Kadyrmetov ◽  
Dmitri A. Popov ◽  
Yevgeny V. Snyatkov
Keyword(s):  
Wear Resistance ◽  
Dry Friction ◽  
Sliding Friction ◽  
Plasma Jet ◽  
Dry Sliding ◽  
Research Results ◽  
Open Atmosphere ◽  
Multicomponent Coating ◽  
Dry Sliding Friction

The article presents the research results of the plasma jet multiple reflow effect over the multicomponent coating FeCoCrAlTiCuNiMo, obtained by plasma metallization in an open atmosphere, on its wear resistance under dry sliding friction. The research results indirectly confirm the influence of the coating entropy over the wear resistance increasing along of the reflow number growth.

Wear resistance of detonation coatings of nichrome base powders in dry sliding friction

1989 ◽  
Vol 28 (6) ◽  
pp. 495-497
Author(s):  
E. K. Fen' ◽  
R. A. Alfintseva ◽  
I. G. Prikhno ◽  
A. P. Rachek
Keyword(s):  
Wear Resistance ◽  
Sliding Friction ◽  
Dry Sliding ◽  
Dry Sliding Friction

Wear Resistance of Electrospark-Deposited Coatings in Dry Sliding Friction Conditions

2021 ◽  
Author(s):  
V.M. Holubets ◽  
M.I. Pashechko ◽  
J. Borc ◽  
O.V. Tisov ◽  
Yu.S. Shpuliar
Keyword(s):  
Wear Resistance ◽  
Sliding Friction ◽  
Dry Sliding ◽  
Dry Sliding Friction

Study on Bainitic Microstructure under Low Austempering Temperature and its Wear Resistance of Low-Alloy High-Carbon Steel

2013 ◽  
Vol 750-752 ◽  
pp. 361-364 ◽  
Author(s):  
Jing Yang ◽  
Zhi Bin Wang ◽  
Hai Liang Zhang ◽  
Xiao Long Liang
Keyword(s):  
Wear Resistance ◽  
Carbon Steel ◽  
Low Temperature ◽  
Wear Mechanism ◽  
Sliding Friction ◽  
High Carbon Steel ◽  
Dry Sliding ◽  
High Carbon ◽  
Bainitic Microstructure ◽  
Dry Sliding Friction

A new low-alloy high-carbon steel was designed to obtain the carbide-free bainite under low-temperature austempering. The microstructure, wear resistance under dry sliding friction and the wear mechanism were comparatively studied between samples austempered and low-temperature tempered. Results show that the carbide-free bainitic microstructure composed of bainitic ferrite laths with mean thickness of 120 nm and retained austenite films can be achieved by austempering at 220 °C for 120 h in salt bath after austenitizing at 1000 °C. The wear resistance under dry sliding friction of austempered sample is 19% more than that of low-temperature tempered sample. The wear mechanism of the low-temperature austempered sample is determined as the adhesive wear.

Study of the wear resistance of high-nitrogen steels under dry sliding friction

2013 ◽  
Vol 48 (5) ◽  
pp. 642-646 ◽  
Author(s):  
O. I. Balyts’kyi ◽  
V. O. Kolesnikov ◽  
J. Eliasz
Keyword(s):  
Wear Resistance ◽  
Sliding Friction ◽  
Dry Sliding ◽  
High Nitrogen ◽  
Nitrogen Steels ◽  
Dry Sliding Friction

Influence of SiO2 Micro- Particles on Microstructure, Mechanical Properties and Wear Resistance of UHMWPE Based Composite under Dry Sliding Friction

2018 ◽  
Vol 769 ◽  
pp. 152-157 ◽  
Author(s):  
Noppanuch Puangmalee ◽  
Narongrit Sonjaitham ◽  
Setthawit Saengthip ◽  
Noppanan Mungnuae ◽  
Surachade Solklin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Sliding Friction ◽  
Polymeric Composite ◽  
Weight Fraction ◽  
Dry Sliding ◽  
Compression Process ◽  
Micro Particles ◽  
The Matrix ◽  
Dry Sliding Friction

This research investigated the influence of silicon dioxide (SiO2) with particle size of 5 micron on microstructure, mechanical properties and wear resistance of UHMWPE polymeric composite materials under dry sliding friction that was tested by Block–on–ring technique according to ASTM G77. Bulk UHMWPE composite specimen was reinforced with SiO2 particles by weight fraction of 0.1, 0.2, 0.3, 0.4, 0.5, 1, 2, 3, 4 and 5 wt.%. Specimen was performed by hot compression process with the compression forming conditions at the temperature of 202°C, pressure of 9.7 MPa and exposure time of 77 minutes. It was found that, SiO2 particle fraction in the range of not exceed than 0.5 wt.% did not affect to change microstructure of the specimen, which its microstructure did not significantly different from the initial UHMWPE specimen due to SiO2 particles were dispersed uniformly in the UHMWPE matrix. Its microstructure appeared in a spherulitic structure pattern. However, the increasing of SiO2 more than 0.5 wt.% affect to changed microstructure due to the SiO2 particles separated from the matrix and accumulated on the UHMWPE matrix. For the case of mechanical and wear resistance properties, the increasing of SiO2 particle of 0.5-1 wt.% affect to increased various mechanical properties to have a highest value and lowest wear rate as compared with initial UHMWPE up to 1.7 times. After that, the increasing of SiO2 particle affect to mechanical properties and wear resistance were decreased, except for the hardness that continuously increased according to the increasing of SiO2.

scholarly journals Wear resistance of steels under conditions of dry sliding friction and electric current of high density

2014 ◽  
Author(s):  
Viktor V. Fadin ◽  
Marina I. Aleutdinova ◽  
Aleksandr V. Kolubaev ◽  
Valeriya A. Aleutdinova
Keyword(s):  
Wear Resistance ◽  
Electric Current ◽  
Sliding Friction ◽  
High Density ◽  
Dry Sliding ◽  
Dry Sliding Friction

Dry sliding friction and wear in plain carbon dual phase steel

2001 ◽  
Vol 32 (2) ◽  
pp. 359-367 ◽  
Author(s):  
Rajnesh Tyagi ◽  
S. K. Nath ◽  
S. Ray
Keyword(s):  
Friction And Wear ◽  
Dual Phase Steel ◽  
Sliding Friction ◽  
Dry Sliding ◽  
Dual Phase ◽  
Dry Sliding Friction

Dry Sliding Friction and Wear Performance of HVOF Sprayed WC–Co Coatings Deposited on Aluminium Alloy

2021 ◽  
Author(s):  
G. S. Pradeep Kumar ◽  
R. Keshavamurthy ◽  
V. Umesh ◽  
Vijay Tambrallimath ◽  
Yash Yadav ◽  
...  
Keyword(s):  
Aluminium Alloy ◽  
Friction And Wear ◽  
Sliding Friction ◽  
Dry Sliding ◽  
Wear Performance ◽  
Dry Sliding Friction
Sign in / Sign up

Export Citation Format

Share Document