Lower bound limit analysis of three-dimensional elastoplastic structures by boundary element method

2003 ◽  
Vol 24 (12) ◽  
pp. 1466-1474
Author(s):  
Liu Ying-hua ◽  
Zhang Xiao-feng ◽  
Cen Zhang-zhi
Keyword(s):  
Boundary Element Method ◽  
Lower Bound ◽  
Boundary Element ◽  
Limit Analysis ◽  
Three Dimensional ◽  
Lower Bound Limit Analysis ◽  
Element Method

Boundary element method in numerical study of three-dimensional Stokes flows in channels of arbitrary shape

2012 ◽  
Vol 9 (1) ◽  
pp. 94-97
Author(s):  
Yu.A. Itkulova
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Cross Section ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cylindrical Tube ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Periodic Flows ◽  
Element Method

In the present work creeping three-dimensional flows of a viscous liquid in a cylindrical tube and a channel of variable cross-section are studied. A qualitative triangulation of the surface of a cylindrical tube, a smoothed and experimental channel of a variable cross section is constructed. The problem is solved numerically using boundary element method in several modifications for a periodic and non-periodic flows. The obtained numerical results are compared with the analytical solution for the Poiseuille flow.

3D simulation of emulsion flow using the boundary element method on the heterogeneous computational systems

2012 ◽  
Vol 9 (1) ◽  
pp. 142-146
Author(s):  
O.A. Solnyshkina
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Problem Size ◽  
Low Reynolds Numbers ◽  
Infinite Domains ◽  
The Matrix ◽  
Computational Systems ◽  
Element Method

In this work the 3D dynamics of two immiscible liquids in unbounded domain at low Reynolds numbers is considered. The numerical method is based on the boundary element method, which is very efficient for simulation of the three-dimensional problems in infinite domains. To accelerate calculations and increase the problem size, a heterogeneous approach to parallelization of the computations on the central (CPU) and graphics (GPU) processors is applied. To accelerate the iterative solver (GMRES) and overcome the limitations associated with the size of the memory of the computation system, the software component of the matrix-vector product

Reduced-Order Modeling of Unsteady Flows About Complex Configurations Using the Boundary Element Method

2002 ◽  
Vol 124 (4) ◽  
pp. 988-993 ◽  
Author(s):  
V. Esfahanian ◽  
M. Behbahani-nejad
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Three Dimensional ◽  
Unsteady Flows ◽  
Reduced Order Modeling ◽  
Element Formulation ◽  
Reduced Order Models ◽  
Reduced Order ◽  
Naca 0012 ◽  
Element Method

An approach to developing a general technique for constructing reduced-order models of unsteady flows about three-dimensional complex geometries is presented. The boundary element method along with the potential flow is used to analyze unsteady flows over two-dimensional airfoils, three-dimensional wings, and wing-body configurations. Eigenanalysis of unsteady flows over a NACA 0012 airfoil, a three-dimensional wing with the NACA 0012 section and a wing-body configuration is performed in time domain based on the unsteady boundary element formulation. Reduced-order models are constructed with and without the static correction. The numerical results demonstrate the accuracy and efficiency of the present method in reduced-order modeling of unsteady flows over complex configurations.

Analysis of three-dimensional hexagonal and cubic polycrystals using the boundary element method

2018 ◽  
Vol 117 ◽  
pp. 58-72 ◽  
Author(s):  
Andres F. Galvis ◽  
Rene Q. Rodríguez ◽  
Paulo Sollero
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Three Dimensional ◽  
Element Method
Sign in / Sign up

Export Citation Format

Share Document