An experimental investigation has been carried out to determine the effect of swirl intensity on heat transfer characteristics of swirling flame impinging on a flat surface. The swirl intensity was varied by using helical vane swirlers having angles of 15°, 30° and 60° (low, medium and high swirl). Qualitative flame structures were studied by taking direct photographs of impinging flames. Experiments were conducted for different helical vane swirlers at different dimensionless separation distances (H/d = 1–6) for fixed value of Reynolds number (Re = 5000) and equivalence ratio (ϕ = 1.0). A dip in heat flux was observed at stagnation point for all levels of swirl. Peak heat flux was observed slightly away from the stagnation point due to centrifugal effect. A comparison of stagnation point heat flux has been done for different swirl intensities and for fixed operating conditions. Most uniform heat flux distribution was obtained corresponds to 30° helical vane swirler (medium swirl) at all separation distances.
Experimental and Numerical Study of the Heat Transfer Characteristics in Solar Thermal Absorber Tubes with Circumferentially Non-uniform Heat Flux
