On nonassembly in the optimal dimensional synthesis of planar mechanisms

2001 ◽  
Vol 21 (5) ◽  
pp. 345-354 ◽  
Author(s):  
R.J. Minnaar ◽  
D.A. Tortorelli ◽  
J.A. Snyman
Keyword(s):  
Dimensional Synthesis ◽  
Planar Mechanisms

Designing Planar Mechanisms Using a Bi-Invariant Metric in the Image Space of SO (3)

1994 ◽  
Author(s):  
Pierre Larochelle ◽  
J. Michael McCarthy
Keyword(s):  
Rigid Body ◽  
Numerical Results ◽  
Image Space ◽  
Dimensional Synthesis ◽  
Invariant Metric ◽  
Planar Mechanisms ◽  
Position And Orientation ◽  
Position Synthesis

Abstract In this paper we present a technique for using a bi-invariant metric in the image space of spherical displacements for designing planar mechanisms for n (> 5) position rigid body guidance. The goal is to perform the dimensional synthesis of the mechanism such that the distance between the position and orientation of the guided body to each of the n goal positions is minimized. Rather than measure these distances in the plane, we introduce an approximating sphere and identify rotations which are equivalent to the planar displacements to a specified tolerance. We then measure distances between the rigid body and the goal positions using a bi-invariant metric on the image space of SO(3). The optimal linkage is obtained by minimizing this distance over all of the n goal positions. The paper proceeds as follows. First, we approximate planar rigid body displacements with spherical displacements and show that the error induced by such an approximation is of order 1/R2, where R is the radius of the approximating sphere. Second, we use a bi-invariant metric in the image space of spherical displacements to synthesize an optimal spherical 4R mechanism. Finally, we identify the planar 4R mechanism associated with the optimal spherical solution. The result is a planar 4R mechanism that has been optimized for n position rigid body guidance using an approximate bi-invariant metric with an error dependent only upon the radius of the approximating sphere. Numerical results for ten position synthesis of a planar 4R mechanism are presented.

Optimum dimensional synthesis of planar mechanisms with geometric constraints

Meccanica ◽  
2020 ◽  
Vol 55 (11) ◽  
pp. 2135-2158
Author(s):  
V. García-Marina ◽  
I. Fernández de Bustos ◽  
G. Urkullu ◽  
R. Ansola
Keyword(s):  
Geometric Constraints ◽  
Dimensional Synthesis ◽  
Planar Mechanisms

A New Approach for Exact/Approximate Point Synthesis of Planar Mechanisms

2005 ◽  
Author(s):  
Ahmad Smaili ◽  
Nadim Diab
Keyword(s):  
Synthesis Method ◽  
Dimensional Synthesis ◽  
Gradient Search ◽  
Planar Mechanisms ◽  
Simple Method ◽  
New Approach ◽  
Optimum Synthesis ◽  
Approximate Synthesis ◽  
Optimum Solution ◽  
Synthesis Approach

The aim of this article is to provide a simple method to solve the mixed exact-approximate dimensional synthesis problem of planar mechanism. The method results in a mechanism that can traverse a closed path with the choice of any number of exact points while the rest are approximate points. The algorithm is based on optimum synthesis rather than on precision position methods. Ant-gradient search is applied on an objective function based on log10 of the error between the desired positions and those generated by the optimum solution. The log10 function discriminates on the side of generating miniscule errors (on the order of 10−14) at the exact points while allowing for higher errors at the approximate positions. The algorithm is tested by way of five examples. One of these examples was used to test exact/approximate synthesis method based on precision point synthesis approach.

Synthesis of Planar Mechanisms for Pick and Place Tasks With Guiding Locations

2013 ◽  
Author(s):  
Pierre Larochelle
Keyword(s):  
Algebraic Geometry ◽  
Constraint Equation ◽  
Dimensional Synthesis ◽  
Motion Generation ◽  
Planar Mechanisms ◽  
Open Chain ◽  
Synthesis Algorithm ◽  
Kinematic Chains ◽  
Synthesis Technique ◽  
Kinematic Inversion

A novel dimensional synthesis technique for solving the mixed exact and approximate motion synthesis problem for planar RR kinematic chains is presented. The methodology uses an analytic representation of the planar RR dyads rigid body constraint equation in combination with an algebraic geometry formulation of the exact synthesis for three prescribed locations to yield designs that exactly reach the prescribed pick & place locations while approximating an arbitrary number of guiding locations. The result is a dimensional synthesis technique for mixed exact and approximate motion generation for planar RR dyads. A solution dyad may be directly implemented as a 2R open chain or two solution dyads may be combined to form a planar 4R closed chain; also known as a planar four-bar mechanism. The synthesis algorithm utilizes only algebraic geometry and does not require the use of a numerical optimization algorithm or a metric on planar displacements. Two implementations of the synthesis algorithm are presented; computational and graphical construction. Moreover, the kinematic inversion of the algorithm is also included. An example that demonstrates the synthesis technique is included.

Formulation of Dimensional Synthesis Procedures for Complex Planar Mechanisms

1987 ◽  
Vol 109 (3) ◽  
pp. 322-328 ◽  
Author(s):  
D. G. Olson ◽  
A. G. Erdman ◽  
D. R. Riley
Keyword(s):  
Graph Theory ◽  
Directed Graph ◽  
Dimensional Synthesis ◽  
Planar Mechanisms

This paper presents an overview of a component-based approach for the dimensional synthesis of planar mechanisms. The components on which the approach is based are called triads, dyads, and free vectors, and can be synthesized for up to five precision positions. A straight-forward method for formulating dimensional synthesis procedures for arbitrarily complex planar mechanisms is developed, and demonstrated by an example using inspection. The method utilizes the concept of the directed graph, which is an enhancement of the usual graph theory representation of mechanisms. Because the method is based on graph theory, it is believed that it could be easily automated.

Sign in / Sign up

Export Citation Format

Share Document